123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136 |
- // SPDX-License-Identifier: GPL-2.0
- /*
- * omap_wdt.c
- *
- * (C) Copyright 2013
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * Based on:
- *
- * Watchdog driver for the TI OMAP 16xx & 24xx/34xx 32KHz (non-secure) watchdog
- *
- * commit 2d991a164a61858012651e13c59521975504e260
- * Author: Bill Pemberton <wfp5p@virginia.edu>
- * Date: Mon Nov 19 13:21:41 2012 -0500
- *
- * watchdog: remove use of __devinit
- *
- * CONFIG_HOTPLUG is going away as an option so __devinit is no longer
- * needed.
- *
- * Author: MontaVista Software, Inc.
- * <gdavis@mvista.com> or <source@mvista.com>
- *
- * History:
- *
- * 20030527: George G. Davis <gdavis@mvista.com>
- * Initially based on linux-2.4.19-rmk7-pxa1/drivers/char/sa1100_wdt.c
- * (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
- * Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk>
- *
- * Copyright (c) 2004 Texas Instruments.
- * 1. Modified to support OMAP1610 32-KHz watchdog timer
- * 2. Ported to 2.6 kernel
- *
- * Copyright (c) 2005 David Brownell
- * Use the driver model and standard identifiers; handle bigger timeouts.
- */
- #include <common.h>
- #include <watchdog.h>
- #include <asm/arch/hardware.h>
- #include <asm/io.h>
- #include <asm/processor.h>
- #include <asm/arch/cpu.h>
- /* Hardware timeout in seconds */
- #define WDT_HW_TIMEOUT 60
- static unsigned int wdt_trgr_pattern = 0x1234;
- void hw_watchdog_reset(void)
- {
- struct wd_timer *wdt = (struct wd_timer *)WDT_BASE;
- /*
- * Somebody just triggered watchdog reset and write to WTGR register
- * is in progress. It is resetting right now, no need to trigger it
- * again
- */
- if ((readl(&wdt->wdtwwps)) & WDT_WWPS_PEND_WTGR)
- return;
- wdt_trgr_pattern = ~wdt_trgr_pattern;
- writel(wdt_trgr_pattern, &wdt->wdtwtgr);
- /*
- * Don't wait for posted write to complete, i.e. don't check
- * WDT_WWPS_PEND_WTGR bit in WWPS register. There is no writes to
- * WTGR register outside of this func, and if entering it
- * we see WDT_WWPS_PEND_WTGR bit set, it means watchdog reset
- * was just triggered. This prevents us from wasting time in busy
- * polling of WDT_WWPS_PEND_WTGR bit.
- */
- }
- static int omap_wdt_set_timeout(unsigned int timeout)
- {
- struct wd_timer *wdt = (struct wd_timer *)WDT_BASE;
- u32 pre_margin = GET_WLDR_VAL(timeout);
- /* just count up at 32 KHz */
- while (readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WLDR)
- ;
- writel(pre_margin, &wdt->wdtwldr);
- while (readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WLDR)
- ;
- return 0;
- }
- void hw_watchdog_disable(void)
- {
- struct wd_timer *wdt = (struct wd_timer *)WDT_BASE;
- /*
- * Disable watchdog
- */
- writel(0xAAAA, &wdt->wdtwspr);
- while (readl(&wdt->wdtwwps) != 0x0)
- ;
- writel(0x5555, &wdt->wdtwspr);
- while (readl(&wdt->wdtwwps) != 0x0)
- ;
- }
- void hw_watchdog_init(void)
- {
- struct wd_timer *wdt = (struct wd_timer *)WDT_BASE;
- /*
- * Make sure the watchdog is disabled. This is unfortunately required
- * because writing to various registers with the watchdog running has no
- * effect.
- */
- hw_watchdog_disable();
- /* initialize prescaler */
- while (readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WCLR)
- ;
- writel(WDT_WCLR_PRE | (PTV << WDT_WCLR_PTV_OFF), &wdt->wdtwclr);
- while (readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WCLR)
- ;
- omap_wdt_set_timeout(WDT_HW_TIMEOUT);
- /* Sequence to enable the watchdog */
- writel(0xBBBB, &wdt->wdtwspr);
- while ((readl(&wdt->wdtwwps)) & WDT_WWPS_PEND_WSPR)
- ;
- writel(0x4444, &wdt->wdtwspr);
- while ((readl(&wdt->wdtwwps)) & WDT_WWPS_PEND_WSPR)
- ;
- }
|