| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115 |
- # SPDX-License-Identifier: GPL-2.0+
- obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/
- obj-$(CONFIG_$(SPL_TPL_)DM) += core/
- obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/
- obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/
- obj-$(CONFIG_$(SPL_TPL_)LED) += led/
- obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/
- obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/raw/
- obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
- obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/
- obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/
- obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/
- obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += mtd/spi/
- obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/
- obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
- obj-$(CONFIG_$(SPL_TPL_)VIRTIO) += virtio/
- obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/
- obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/
- ifndef CONFIG_TPL_BUILD
- ifdef CONFIG_SPL_BUILD
- obj-$(CONFIG_SPL_BOOTCOUNT_LIMIT) += bootcount/
- obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/
- obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
- obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/
- obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
- obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
- obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
- obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
- obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
- obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
- obj-$(CONFIG_SPL_POWER_DOMAIN) += power/domain/
- obj-$(CONFIG_SPL_DM_RESET) += reset/
- obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
- obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
- obj-$(CONFIG_SPL_UBI) += mtd/ubispl/
- obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
- obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
- obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
- obj-$(CONFIG_SPL_USB_ETHER) += net/phy/
- obj-$(CONFIG_SPL_PCI_SUPPORT) += pci/
- obj-$(CONFIG_SPL_PCH_SUPPORT) += pch/
- obj-$(CONFIG_SPL_RTC_SUPPORT) += rtc/
- obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
- obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/
- obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/
- obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/
- obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
- obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
- obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
- obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
- obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
- obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
- obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
- obj-$(CONFIG_SPL_THERMAL) += thermal/
- endif
- endif
- ifdef CONFIG_TPL_BUILD
- obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
- endif
- ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
- obj-y += adc/
- obj-y += ata/
- obj-$(CONFIG_DM_DEMO) += demo/
- obj-$(CONFIG_BIOSEMU) += bios_emulator/
- obj-y += block/
- obj-y += board/
- obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
- obj-$(CONFIG_CPU) += cpu/
- obj-y += crypto/
- obj-$(CONFIG_FASTBOOT) += fastboot/
- obj-y += firmware/
- obj-$(CONFIG_FPGA) += fpga/
- obj-y += misc/
- obj-$(CONFIG_MMC) += mmc/
- obj-$(CONFIG_NVME) += nvme/
- obj-y += pcmcia/
- obj-y += dfu/
- obj-$(CONFIG_X86) += pch/
- obj-y += phy/allwinner/
- obj-y += phy/marvell/
- obj-y += rtc/
- obj-y += scsi/
- obj-y += sound/
- obj-y += spmi/
- obj-y += sysreset/
- obj-y += tpm/
- obj-y += video/
- obj-y += watchdog/
- obj-$(CONFIG_QE) += qe/
- obj-$(CONFIG_U_QE) += qe/
- obj-y += mailbox/
- obj-y += memory/
- obj-y += pwm/
- obj-y += reset/
- obj-y += input/
- # SOC specific infrastructure drivers.
- obj-y += smem/
- obj-y += soc/
- obj-y += thermal/
- obj-$(CONFIG_TEE) += tee/
- obj-y += axi/
- obj-$(CONFIG_W1) += w1/
- obj-$(CONFIG_W1_EEPROM) += w1-eeprom/
- obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
- endif
|
