omap.h 4.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145
  1. /*
  2. * (C) Copyright 2010
  3. * Texas Instruments, <www.ti.com>
  4. *
  5. * Authors:
  6. * Aneesh V <aneesh@ti.com>
  7. *
  8. * Derived from OMAP3 work by
  9. * Richard Woodruff <r-woodruff2@ti.com>
  10. * Syed Mohammed Khasim <x0khasim@ti.com>
  11. *
  12. * SPDX-License-Identifier: GPL-2.0+
  13. */
  14. #ifndef _OMAP4_H_
  15. #define _OMAP4_H_
  16. #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
  17. #include <asm/types.h>
  18. #endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
  19. #include <linux/sizes.h>
  20. /*
  21. * L4 Peripherals - L4 Wakeup and L4 Core now
  22. */
  23. #define OMAP44XX_L4_CORE_BASE 0x4A000000
  24. #define OMAP44XX_L4_WKUP_BASE 0x4A300000
  25. #define OMAP44XX_L4_PER_BASE 0x48000000
  26. #define OMAP44XX_DRAM_ADDR_SPACE_START 0x80000000
  27. #define OMAP44XX_DRAM_ADDR_SPACE_END 0xD0000000
  28. #define DRAM_ADDR_SPACE_START OMAP44XX_DRAM_ADDR_SPACE_START
  29. #define DRAM_ADDR_SPACE_END OMAP44XX_DRAM_ADDR_SPACE_END
  30. /* CONTROL_ID_CODE */
  31. #define CONTROL_ID_CODE 0x4A002204
  32. #define OMAP4_CONTROL_ID_CODE_ES1_0 0x0B85202F
  33. #define OMAP4_CONTROL_ID_CODE_ES2_0 0x1B85202F
  34. #define OMAP4_CONTROL_ID_CODE_ES2_1 0x3B95C02F
  35. #define OMAP4_CONTROL_ID_CODE_ES2_2 0x4B95C02F
  36. #define OMAP4_CONTROL_ID_CODE_ES2_3 0x6B95C02F
  37. #define OMAP4460_CONTROL_ID_CODE_ES1_0 0x0B94E02F
  38. #define OMAP4460_CONTROL_ID_CODE_ES1_1 0x2B94E02F
  39. #define OMAP4470_CONTROL_ID_CODE_ES1_0 0x0B97502F
  40. /* UART */
  41. #define UART1_BASE (OMAP44XX_L4_PER_BASE + 0x6a000)
  42. #define UART2_BASE (OMAP44XX_L4_PER_BASE + 0x6c000)
  43. #define UART3_BASE (OMAP44XX_L4_PER_BASE + 0x20000)
  44. /* General Purpose Timers */
  45. #define GPT1_BASE (OMAP44XX_L4_WKUP_BASE + 0x18000)
  46. #define GPT2_BASE (OMAP44XX_L4_PER_BASE + 0x32000)
  47. #define GPT3_BASE (OMAP44XX_L4_PER_BASE + 0x34000)
  48. /* Watchdog Timer2 - MPU watchdog */
  49. #define WDT2_BASE (OMAP44XX_L4_WKUP_BASE + 0x14000)
  50. /*
  51. * Hardware Register Details
  52. */
  53. /* Watchdog Timer */
  54. #define WD_UNLOCK1 0xAAAA
  55. #define WD_UNLOCK2 0x5555
  56. /* GP Timer */
  57. #define TCLR_ST (0x1 << 0)
  58. #define TCLR_AR (0x1 << 1)
  59. #define TCLR_PRE (0x1 << 5)
  60. /* Control Module */
  61. #define LDOSRAM_ACTMODE_VSET_IN_MASK (0x1F << 5)
  62. #define LDOSRAM_VOLT_CTRL_OVERRIDE 0x0401040f
  63. #define CONTROL_EFUSE_1_OVERRIDE 0x1C4D0110
  64. #define CONTROL_EFUSE_2_OVERRIDE 0x99084000
  65. /* LPDDR2 IO regs */
  66. #define CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN 0x1C1C1C1C
  67. #define CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER 0x9E9E9E9E
  68. #define CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN 0x7C7C7C7C
  69. #define LPDDR2IO_GR10_WD_MASK (3 << 17)
  70. #define CONTROL_LPDDR2IO_3_VAL 0xA0888C0F
  71. /* CONTROL_EFUSE_2 */
  72. #define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000
  73. #define MMC1_PWRDNZ (1 << 26)
  74. #define MMC1_PBIASLITE_PWRDNZ (1 << 22)
  75. #define MMC1_PBIASLITE_VMODE (1 << 21)
  76. #ifndef __ASSEMBLY__
  77. struct s32ktimer {
  78. unsigned char res[0x10];
  79. unsigned int s32k_cr; /* 0x10 */
  80. };
  81. #define DEVICE_TYPE_SHIFT (0x8)
  82. #define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT)
  83. #define DEVICE_GP 0x3
  84. #endif /* __ASSEMBLY__ */
  85. /*
  86. * Non-secure SRAM Addresses
  87. * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE
  88. * at 0x40304000(EMU base) so that our code works for both EMU and GP
  89. */
  90. #define NON_SECURE_SRAM_START 0x40304000
  91. #define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */
  92. #define NON_SECURE_SRAM_IMG_END 0x4030C000
  93. #define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K)
  94. /* base address for indirect vectors (internal boot mode) */
  95. #define SRAM_ROM_VECT_BASE 0x4030D000
  96. /* ABB settings */
  97. #define OMAP_ABB_SETTLING_TIME 50
  98. #define OMAP_ABB_CLOCK_CYCLES 16
  99. /* ABB tranxdone mask */
  100. #define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7)
  101. #define OMAP44XX_SAR_RAM_BASE 0x4a326000
  102. #define OMAP_REBOOT_REASON_OFFSET 0xA0C
  103. #define OMAP_REBOOT_REASON_SIZE 0x0F
  104. /* Boot parameters */
  105. #ifndef __ASSEMBLY__
  106. struct omap_boot_parameters {
  107. unsigned int boot_message;
  108. unsigned int boot_device_descriptor;
  109. unsigned char boot_device;
  110. unsigned char reset_reason;
  111. unsigned char ch_flags;
  112. };
  113. int omap_reboot_mode(char *mode, unsigned int length);
  114. int omap_reboot_mode_clear(void);
  115. int omap_reboot_mode_store(char *mode);
  116. #endif
  117. #endif