123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113 |
- /*
- * Copyright 2010 eXMeritus, A Boeing Company
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
- #ifndef POWERPC_ASM_MPC85XX_GPIO_H_
- #define POWERPC_ASM_MPC85XX_GPIO_H_
- # include <asm/immap_85xx.h>
- /*
- * The following internal functions are an MPC85XX-specific GPIO API which
- * allows setting and querying multiple GPIOs in a single operation.
- *
- * All of these look relatively large, but the arguments are almost always
- * constants, so they compile down to just a few instructions and a
- * memory-mapped IO operation or two.
- */
- static inline void mpc85xx_gpio_set(unsigned int mask,
- unsigned int dir, unsigned int val)
- {
- ccsr_gpio_t *gpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
- /* First mask off the unwanted parts of "dir" and "val" */
- dir &= mask;
- val &= mask;
- /* Now read in the values we're supposed to preserve */
- dir |= (in_be32(&gpio->gpdir) & ~mask);
- val |= (in_be32(&gpio->gpdat) & ~mask);
- /*
- * Poke the new output values first, then set the direction. This
- * helps to avoid transient data when switching from input to output
- * and vice versa.
- */
- out_be32(&gpio->gpdat, val);
- out_be32(&gpio->gpdir, dir);
- }
- static inline void mpc85xx_gpio_set_in(unsigned int gpios)
- {
- mpc85xx_gpio_set(gpios, 0x00000000, 0x00000000);
- }
- static inline void mpc85xx_gpio_set_low(unsigned int gpios)
- {
- mpc85xx_gpio_set(gpios, 0xFFFFFFFF, 0x00000000);
- }
- static inline void mpc85xx_gpio_set_high(unsigned int gpios)
- {
- mpc85xx_gpio_set(gpios, 0xFFFFFFFF, 0xFFFFFFFF);
- }
- static inline unsigned int mpc85xx_gpio_get(unsigned int mask)
- {
- ccsr_gpio_t *gpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
- /* Read the requested values */
- return in_be32(&gpio->gpdat) & mask;
- }
- /*
- * These implement the generic Linux GPIO API on top of the other functions
- * in this header.
- */
- static inline int gpio_request(unsigned gpio, const char *label)
- {
- /* Compatibility shim */
- return 0;
- }
- static inline void gpio_free(unsigned gpio)
- {
- /* Compatibility shim */
- }
- static inline int gpio_direction_input(unsigned gpio)
- {
- mpc85xx_gpio_set_in(1U << gpio);
- return 0;
- }
- static inline int gpio_direction_output(unsigned gpio, int value)
- {
- if (value)
- mpc85xx_gpio_set_high(1U << gpio);
- else
- mpc85xx_gpio_set_low(1U << gpio);
- return 0;
- }
- static inline int gpio_get_value(unsigned gpio)
- {
- return !!mpc85xx_gpio_get(1U << gpio);
- }
- static inline void gpio_set_value(unsigned gpio, int value)
- {
- if (value)
- mpc85xx_gpio_set_high(1U << gpio);
- else
- mpc85xx_gpio_set_low(1U << gpio);
- }
- static inline int gpio_is_valid(int gpio)
- {
- return (gpio >= 0) && (gpio < 32);
- }
- #endif /* not POWERPC_ASM_MPC85XX_GPIO_H_ */
|