image.c 36 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364
  1. /*
  2. * (C) Copyright 2008 Semihalf
  3. *
  4. * (C) Copyright 2000-2006
  5. * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  6. *
  7. * SPDX-License-Identifier: GPL-2.0+
  8. */
  9. #ifndef USE_HOSTCC
  10. #include <common.h>
  11. #include <watchdog.h>
  12. #ifdef CONFIG_SHOW_BOOT_PROGRESS
  13. #include <status_led.h>
  14. #endif
  15. #ifdef CONFIG_HAS_DATAFLASH
  16. #include <dataflash.h>
  17. #endif
  18. #ifdef CONFIG_LOGBUFFER
  19. #include <logbuff.h>
  20. #endif
  21. #include <rtc.h>
  22. #include <environment.h>
  23. #include <image.h>
  24. #include <mapmem.h>
  25. #if defined(CONFIG_FIT) || defined(CONFIG_OF_LIBFDT)
  26. #include <libfdt.h>
  27. #include <fdt_support.h>
  28. #endif
  29. #include <u-boot/md5.h>
  30. #include <u-boot/sha1.h>
  31. #include <asm/errno.h>
  32. #include <asm/io.h>
  33. #ifdef CONFIG_CMD_BDI
  34. extern int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
  35. #endif
  36. DECLARE_GLOBAL_DATA_PTR;
  37. #if defined(CONFIG_IMAGE_FORMAT_LEGACY)
  38. static const image_header_t *image_get_ramdisk(ulong rd_addr, uint8_t arch,
  39. int verify);
  40. #endif
  41. #else
  42. #include "mkimage.h"
  43. #include <u-boot/md5.h>
  44. #include <time.h>
  45. #include <image.h>
  46. #endif /* !USE_HOSTCC*/
  47. #include <u-boot/crc.h>
  48. #ifndef CONFIG_SYS_BARGSIZE
  49. #define CONFIG_SYS_BARGSIZE 512
  50. #endif
  51. static const table_entry_t uimage_arch[] = {
  52. { IH_ARCH_INVALID, NULL, "Invalid ARCH", },
  53. { IH_ARCH_ALPHA, "alpha", "Alpha", },
  54. { IH_ARCH_ARM, "arm", "ARM", },
  55. { IH_ARCH_I386, "x86", "Intel x86", },
  56. { IH_ARCH_IA64, "ia64", "IA64", },
  57. { IH_ARCH_M68K, "m68k", "M68K", },
  58. { IH_ARCH_MICROBLAZE, "microblaze", "MicroBlaze", },
  59. { IH_ARCH_MIPS, "mips", "MIPS", },
  60. { IH_ARCH_MIPS64, "mips64", "MIPS 64 Bit", },
  61. { IH_ARCH_NIOS2, "nios2", "NIOS II", },
  62. { IH_ARCH_PPC, "powerpc", "PowerPC", },
  63. { IH_ARCH_PPC, "ppc", "PowerPC", },
  64. { IH_ARCH_S390, "s390", "IBM S390", },
  65. { IH_ARCH_SH, "sh", "SuperH", },
  66. { IH_ARCH_SPARC, "sparc", "SPARC", },
  67. { IH_ARCH_SPARC64, "sparc64", "SPARC 64 Bit", },
  68. { IH_ARCH_BLACKFIN, "blackfin", "Blackfin", },
  69. { IH_ARCH_AVR32, "avr32", "AVR32", },
  70. { IH_ARCH_NDS32, "nds32", "NDS32", },
  71. { IH_ARCH_OPENRISC, "or1k", "OpenRISC 1000",},
  72. { IH_ARCH_SANDBOX, "sandbox", "Sandbox", },
  73. { IH_ARCH_ARM64, "arm64", "AArch64", },
  74. { IH_ARCH_ARC, "arc", "ARC", },
  75. { IH_ARCH_X86_64, "x86_64", "AMD x86_64", },
  76. { -1, "", "", },
  77. };
  78. static const table_entry_t uimage_os[] = {
  79. { IH_OS_INVALID, NULL, "Invalid OS", },
  80. { IH_OS_LINUX, "linux", "Linux", },
  81. #if defined(CONFIG_LYNXKDI) || defined(USE_HOSTCC)
  82. { IH_OS_LYNXOS, "lynxos", "LynxOS", },
  83. #endif
  84. { IH_OS_NETBSD, "netbsd", "NetBSD", },
  85. { IH_OS_OSE, "ose", "Enea OSE", },
  86. { IH_OS_PLAN9, "plan9", "Plan 9", },
  87. { IH_OS_RTEMS, "rtems", "RTEMS", },
  88. { IH_OS_U_BOOT, "u-boot", "U-Boot", },
  89. { IH_OS_VXWORKS, "vxworks", "VxWorks", },
  90. #if defined(CONFIG_CMD_ELF) || defined(USE_HOSTCC)
  91. { IH_OS_QNX, "qnx", "QNX", },
  92. #endif
  93. #if defined(CONFIG_INTEGRITY) || defined(USE_HOSTCC)
  94. { IH_OS_INTEGRITY,"integrity", "INTEGRITY", },
  95. #endif
  96. #ifdef USE_HOSTCC
  97. { IH_OS_4_4BSD, "4_4bsd", "4_4BSD", },
  98. { IH_OS_DELL, "dell", "Dell", },
  99. { IH_OS_ESIX, "esix", "Esix", },
  100. { IH_OS_FREEBSD, "freebsd", "FreeBSD", },
  101. { IH_OS_IRIX, "irix", "Irix", },
  102. { IH_OS_NCR, "ncr", "NCR", },
  103. { IH_OS_OPENBSD, "openbsd", "OpenBSD", },
  104. { IH_OS_PSOS, "psos", "pSOS", },
  105. { IH_OS_SCO, "sco", "SCO", },
  106. { IH_OS_SOLARIS, "solaris", "Solaris", },
  107. { IH_OS_SVR4, "svr4", "SVR4", },
  108. #endif
  109. #if defined(CONFIG_BOOTM_OPENRTOS) || defined(USE_HOSTCC)
  110. { IH_OS_OPENRTOS, "openrtos", "OpenRTOS", },
  111. #endif
  112. { -1, "", "", },
  113. };
  114. static const table_entry_t uimage_type[] = {
  115. { IH_TYPE_AISIMAGE, "aisimage", "Davinci AIS image",},
  116. { IH_TYPE_FILESYSTEM, "filesystem", "Filesystem Image", },
  117. { IH_TYPE_FIRMWARE, "firmware", "Firmware", },
  118. { IH_TYPE_FLATDT, "flat_dt", "Flat Device Tree", },
  119. { IH_TYPE_GPIMAGE, "gpimage", "TI Keystone SPL Image",},
  120. { IH_TYPE_KERNEL, "kernel", "Kernel Image", },
  121. { IH_TYPE_KERNEL_NOLOAD, "kernel_noload", "Kernel Image (no loading done)", },
  122. { IH_TYPE_KWBIMAGE, "kwbimage", "Kirkwood Boot Image",},
  123. { IH_TYPE_IMXIMAGE, "imximage", "Freescale i.MX Boot Image",},
  124. { IH_TYPE_INVALID, NULL, "Invalid Image", },
  125. { IH_TYPE_MULTI, "multi", "Multi-File Image", },
  126. { IH_TYPE_OMAPIMAGE, "omapimage", "TI OMAP SPL With GP CH",},
  127. { IH_TYPE_PBLIMAGE, "pblimage", "Freescale PBL Boot Image",},
  128. { IH_TYPE_RAMDISK, "ramdisk", "RAMDisk Image", },
  129. { IH_TYPE_SCRIPT, "script", "Script", },
  130. { IH_TYPE_SOCFPGAIMAGE, "socfpgaimage", "Altera SOCFPGA preloader",},
  131. { IH_TYPE_STANDALONE, "standalone", "Standalone Program", },
  132. { IH_TYPE_UBLIMAGE, "ublimage", "Davinci UBL image",},
  133. { IH_TYPE_MXSIMAGE, "mxsimage", "Freescale MXS Boot Image",},
  134. { IH_TYPE_ATMELIMAGE, "atmelimage", "ATMEL ROM-Boot Image",},
  135. { IH_TYPE_X86_SETUP, "x86_setup", "x86 setup.bin", },
  136. { IH_TYPE_LPC32XXIMAGE, "lpc32xximage", "LPC32XX Boot Image", },
  137. { -1, "", "", },
  138. };
  139. static const table_entry_t uimage_comp[] = {
  140. { IH_COMP_NONE, "none", "uncompressed", },
  141. { IH_COMP_BZIP2, "bzip2", "bzip2 compressed", },
  142. { IH_COMP_GZIP, "gzip", "gzip compressed", },
  143. { IH_COMP_LZMA, "lzma", "lzma compressed", },
  144. { IH_COMP_LZO, "lzo", "lzo compressed", },
  145. { -1, "", "", },
  146. };
  147. /*****************************************************************************/
  148. /* Legacy format routines */
  149. /*****************************************************************************/
  150. int image_check_hcrc(const image_header_t *hdr)
  151. {
  152. ulong hcrc;
  153. ulong len = image_get_header_size();
  154. image_header_t header;
  155. /* Copy header so we can blank CRC field for re-calculation */
  156. memmove(&header, (char *)hdr, image_get_header_size());
  157. image_set_hcrc(&header, 0);
  158. hcrc = crc32(0, (unsigned char *)&header, len);
  159. return (hcrc == image_get_hcrc(hdr));
  160. }
  161. int image_check_dcrc(const image_header_t *hdr)
  162. {
  163. ulong data = image_get_data(hdr);
  164. ulong len = image_get_data_size(hdr);
  165. ulong dcrc = crc32_wd(0, (unsigned char *)data, len, CHUNKSZ_CRC32);
  166. return (dcrc == image_get_dcrc(hdr));
  167. }
  168. /**
  169. * image_multi_count - get component (sub-image) count
  170. * @hdr: pointer to the header of the multi component image
  171. *
  172. * image_multi_count() returns number of components in a multi
  173. * component image.
  174. *
  175. * Note: no checking of the image type is done, caller must pass
  176. * a valid multi component image.
  177. *
  178. * returns:
  179. * number of components
  180. */
  181. ulong image_multi_count(const image_header_t *hdr)
  182. {
  183. ulong i, count = 0;
  184. uint32_t *size;
  185. /* get start of the image payload, which in case of multi
  186. * component images that points to a table of component sizes */
  187. size = (uint32_t *)image_get_data(hdr);
  188. /* count non empty slots */
  189. for (i = 0; size[i]; ++i)
  190. count++;
  191. return count;
  192. }
  193. /**
  194. * image_multi_getimg - get component data address and size
  195. * @hdr: pointer to the header of the multi component image
  196. * @idx: index of the requested component
  197. * @data: pointer to a ulong variable, will hold component data address
  198. * @len: pointer to a ulong variable, will hold component size
  199. *
  200. * image_multi_getimg() returns size and data address for the requested
  201. * component in a multi component image.
  202. *
  203. * Note: no checking of the image type is done, caller must pass
  204. * a valid multi component image.
  205. *
  206. * returns:
  207. * data address and size of the component, if idx is valid
  208. * 0 in data and len, if idx is out of range
  209. */
  210. void image_multi_getimg(const image_header_t *hdr, ulong idx,
  211. ulong *data, ulong *len)
  212. {
  213. int i;
  214. uint32_t *size;
  215. ulong offset, count, img_data;
  216. /* get number of component */
  217. count = image_multi_count(hdr);
  218. /* get start of the image payload, which in case of multi
  219. * component images that points to a table of component sizes */
  220. size = (uint32_t *)image_get_data(hdr);
  221. /* get address of the proper component data start, which means
  222. * skipping sizes table (add 1 for last, null entry) */
  223. img_data = image_get_data(hdr) + (count + 1) * sizeof(uint32_t);
  224. if (idx < count) {
  225. *len = uimage_to_cpu(size[idx]);
  226. offset = 0;
  227. /* go over all indices preceding requested component idx */
  228. for (i = 0; i < idx; i++) {
  229. /* add up i-th component size, rounding up to 4 bytes */
  230. offset += (uimage_to_cpu(size[i]) + 3) & ~3 ;
  231. }
  232. /* calculate idx-th component data address */
  233. *data = img_data + offset;
  234. } else {
  235. *len = 0;
  236. *data = 0;
  237. }
  238. }
  239. static void image_print_type(const image_header_t *hdr)
  240. {
  241. const char *os, *arch, *type, *comp;
  242. os = genimg_get_os_name(image_get_os(hdr));
  243. arch = genimg_get_arch_name(image_get_arch(hdr));
  244. type = genimg_get_type_name(image_get_type(hdr));
  245. comp = genimg_get_comp_name(image_get_comp(hdr));
  246. printf("%s %s %s (%s)\n", arch, os, type, comp);
  247. }
  248. /**
  249. * image_print_contents - prints out the contents of the legacy format image
  250. * @ptr: pointer to the legacy format image header
  251. * @p: pointer to prefix string
  252. *
  253. * image_print_contents() formats a multi line legacy image contents description.
  254. * The routine prints out all header fields followed by the size/offset data
  255. * for MULTI/SCRIPT images.
  256. *
  257. * returns:
  258. * no returned results
  259. */
  260. void image_print_contents(const void *ptr)
  261. {
  262. const image_header_t *hdr = (const image_header_t *)ptr;
  263. const char *p;
  264. p = IMAGE_INDENT_STRING;
  265. printf("%sImage Name: %.*s\n", p, IH_NMLEN, image_get_name(hdr));
  266. if (IMAGE_ENABLE_TIMESTAMP) {
  267. printf("%sCreated: ", p);
  268. genimg_print_time((time_t)image_get_time(hdr));
  269. }
  270. printf("%sImage Type: ", p);
  271. image_print_type(hdr);
  272. printf("%sData Size: ", p);
  273. genimg_print_size(image_get_data_size(hdr));
  274. printf("%sLoad Address: %08x\n", p, image_get_load(hdr));
  275. printf("%sEntry Point: %08x\n", p, image_get_ep(hdr));
  276. if (image_check_type(hdr, IH_TYPE_MULTI) ||
  277. image_check_type(hdr, IH_TYPE_SCRIPT)) {
  278. int i;
  279. ulong data, len;
  280. ulong count = image_multi_count(hdr);
  281. printf("%sContents:\n", p);
  282. for (i = 0; i < count; i++) {
  283. image_multi_getimg(hdr, i, &data, &len);
  284. printf("%s Image %d: ", p, i);
  285. genimg_print_size(len);
  286. if (image_check_type(hdr, IH_TYPE_SCRIPT) && i > 0) {
  287. /*
  288. * the user may need to know offsets
  289. * if planning to do something with
  290. * multiple files
  291. */
  292. printf("%s Offset = 0x%08lx\n", p, data);
  293. }
  294. }
  295. }
  296. }
  297. #ifndef USE_HOSTCC
  298. #if defined(CONFIG_IMAGE_FORMAT_LEGACY)
  299. /**
  300. * image_get_ramdisk - get and verify ramdisk image
  301. * @rd_addr: ramdisk image start address
  302. * @arch: expected ramdisk architecture
  303. * @verify: checksum verification flag
  304. *
  305. * image_get_ramdisk() returns a pointer to the verified ramdisk image
  306. * header. Routine receives image start address and expected architecture
  307. * flag. Verification done covers data and header integrity and os/type/arch
  308. * fields checking.
  309. *
  310. * If dataflash support is enabled routine checks for dataflash addresses
  311. * and handles required dataflash reads.
  312. *
  313. * returns:
  314. * pointer to a ramdisk image header, if image was found and valid
  315. * otherwise, return NULL
  316. */
  317. static const image_header_t *image_get_ramdisk(ulong rd_addr, uint8_t arch,
  318. int verify)
  319. {
  320. const image_header_t *rd_hdr = (const image_header_t *)rd_addr;
  321. if (!image_check_magic(rd_hdr)) {
  322. puts("Bad Magic Number\n");
  323. bootstage_error(BOOTSTAGE_ID_RD_MAGIC);
  324. return NULL;
  325. }
  326. if (!image_check_hcrc(rd_hdr)) {
  327. puts("Bad Header Checksum\n");
  328. bootstage_error(BOOTSTAGE_ID_RD_HDR_CHECKSUM);
  329. return NULL;
  330. }
  331. bootstage_mark(BOOTSTAGE_ID_RD_MAGIC);
  332. image_print_contents(rd_hdr);
  333. if (verify) {
  334. puts(" Verifying Checksum ... ");
  335. if (!image_check_dcrc(rd_hdr)) {
  336. puts("Bad Data CRC\n");
  337. bootstage_error(BOOTSTAGE_ID_RD_CHECKSUM);
  338. return NULL;
  339. }
  340. puts("OK\n");
  341. }
  342. bootstage_mark(BOOTSTAGE_ID_RD_HDR_CHECKSUM);
  343. if (!image_check_os(rd_hdr, IH_OS_LINUX) ||
  344. !image_check_arch(rd_hdr, arch) ||
  345. !image_check_type(rd_hdr, IH_TYPE_RAMDISK)) {
  346. printf("No Linux %s Ramdisk Image\n",
  347. genimg_get_arch_name(arch));
  348. bootstage_error(BOOTSTAGE_ID_RAMDISK);
  349. return NULL;
  350. }
  351. return rd_hdr;
  352. }
  353. #endif
  354. #endif /* !USE_HOSTCC */
  355. /*****************************************************************************/
  356. /* Shared dual-format routines */
  357. /*****************************************************************************/
  358. #ifndef USE_HOSTCC
  359. ulong load_addr = CONFIG_SYS_LOAD_ADDR; /* Default Load Address */
  360. ulong save_addr; /* Default Save Address */
  361. ulong save_size; /* Default Save Size (in bytes) */
  362. static int on_loadaddr(const char *name, const char *value, enum env_op op,
  363. int flags)
  364. {
  365. switch (op) {
  366. case env_op_create:
  367. case env_op_overwrite:
  368. load_addr = simple_strtoul(value, NULL, 16);
  369. break;
  370. default:
  371. break;
  372. }
  373. return 0;
  374. }
  375. U_BOOT_ENV_CALLBACK(loadaddr, on_loadaddr);
  376. ulong getenv_bootm_low(void)
  377. {
  378. char *s = getenv("bootm_low");
  379. if (s) {
  380. ulong tmp = simple_strtoul(s, NULL, 16);
  381. return tmp;
  382. }
  383. #if defined(CONFIG_SYS_SDRAM_BASE)
  384. return CONFIG_SYS_SDRAM_BASE;
  385. #elif defined(CONFIG_ARM)
  386. return gd->bd->bi_dram[0].start;
  387. #else
  388. return 0;
  389. #endif
  390. }
  391. phys_size_t getenv_bootm_size(void)
  392. {
  393. phys_size_t tmp;
  394. char *s = getenv("bootm_size");
  395. if (s) {
  396. tmp = (phys_size_t)simple_strtoull(s, NULL, 16);
  397. return tmp;
  398. }
  399. s = getenv("bootm_low");
  400. if (s)
  401. tmp = (phys_size_t)simple_strtoull(s, NULL, 16);
  402. else
  403. tmp = 0;
  404. #if defined(CONFIG_ARM) && defined(CONFIG_NR_DRAM_BANKS)
  405. return gd->bd->bi_dram[0].size - tmp;
  406. #else
  407. return gd->bd->bi_memsize - tmp;
  408. #endif
  409. }
  410. phys_size_t getenv_bootm_mapsize(void)
  411. {
  412. phys_size_t tmp;
  413. char *s = getenv("bootm_mapsize");
  414. if (s) {
  415. tmp = (phys_size_t)simple_strtoull(s, NULL, 16);
  416. return tmp;
  417. }
  418. #if defined(CONFIG_SYS_BOOTMAPSZ)
  419. return CONFIG_SYS_BOOTMAPSZ;
  420. #else
  421. return getenv_bootm_size();
  422. #endif
  423. }
  424. void memmove_wd(void *to, void *from, size_t len, ulong chunksz)
  425. {
  426. if (to == from)
  427. return;
  428. #if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
  429. if (to > from) {
  430. from += len;
  431. to += len;
  432. }
  433. while (len > 0) {
  434. size_t tail = (len > chunksz) ? chunksz : len;
  435. WATCHDOG_RESET();
  436. if (to > from) {
  437. to -= tail;
  438. from -= tail;
  439. }
  440. memmove(to, from, tail);
  441. if (to < from) {
  442. to += tail;
  443. from += tail;
  444. }
  445. len -= tail;
  446. }
  447. #else /* !(CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG) */
  448. memmove(to, from, len);
  449. #endif /* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */
  450. }
  451. #endif /* !USE_HOSTCC */
  452. void genimg_print_size(uint32_t size)
  453. {
  454. #ifndef USE_HOSTCC
  455. printf("%d Bytes = ", size);
  456. print_size(size, "\n");
  457. #else
  458. printf("%d Bytes = %.2f kB = %.2f MB\n",
  459. size, (double)size / 1.024e3,
  460. (double)size / 1.048576e6);
  461. #endif
  462. }
  463. #if IMAGE_ENABLE_TIMESTAMP
  464. void genimg_print_time(time_t timestamp)
  465. {
  466. #ifndef USE_HOSTCC
  467. struct rtc_time tm;
  468. rtc_to_tm(timestamp, &tm);
  469. printf("%4d-%02d-%02d %2d:%02d:%02d UTC\n",
  470. tm.tm_year, tm.tm_mon, tm.tm_mday,
  471. tm.tm_hour, tm.tm_min, tm.tm_sec);
  472. #else
  473. printf("%s", ctime(&timestamp));
  474. #endif
  475. }
  476. #endif
  477. const table_entry_t *get_table_entry(const table_entry_t *table, int id)
  478. {
  479. for (; table->id >= 0; ++table) {
  480. if (table->id == id)
  481. return table;
  482. }
  483. return NULL;
  484. }
  485. /**
  486. * get_table_entry_name - translate entry id to long name
  487. * @table: pointer to a translation table for entries of a specific type
  488. * @msg: message to be returned when translation fails
  489. * @id: entry id to be translated
  490. *
  491. * get_table_entry_name() will go over translation table trying to find
  492. * entry that matches given id. If matching entry is found, its long
  493. * name is returned to the caller.
  494. *
  495. * returns:
  496. * long entry name if translation succeeds
  497. * msg otherwise
  498. */
  499. char *get_table_entry_name(const table_entry_t *table, char *msg, int id)
  500. {
  501. table = get_table_entry(table, id);
  502. if (!table)
  503. return msg;
  504. #if defined(USE_HOSTCC) || !defined(CONFIG_NEEDS_MANUAL_RELOC)
  505. return table->lname;
  506. #else
  507. return table->lname + gd->reloc_off;
  508. #endif
  509. }
  510. const char *genimg_get_os_name(uint8_t os)
  511. {
  512. return (get_table_entry_name(uimage_os, "Unknown OS", os));
  513. }
  514. const char *genimg_get_arch_name(uint8_t arch)
  515. {
  516. return (get_table_entry_name(uimage_arch, "Unknown Architecture",
  517. arch));
  518. }
  519. const char *genimg_get_type_name(uint8_t type)
  520. {
  521. return (get_table_entry_name(uimage_type, "Unknown Image", type));
  522. }
  523. const char *genimg_get_type_short_name(uint8_t type)
  524. {
  525. const table_entry_t *table;
  526. table = get_table_entry(uimage_type, type);
  527. if (!table)
  528. return "unknown";
  529. #if defined(USE_HOSTCC) || !defined(CONFIG_NEEDS_MANUAL_RELOC)
  530. return table->sname;
  531. #else
  532. return table->sname + gd->reloc_off;
  533. #endif
  534. }
  535. const char *genimg_get_comp_name(uint8_t comp)
  536. {
  537. return (get_table_entry_name(uimage_comp, "Unknown Compression",
  538. comp));
  539. }
  540. /**
  541. * get_table_entry_id - translate short entry name to id
  542. * @table: pointer to a translation table for entries of a specific type
  543. * @table_name: to be used in case of error
  544. * @name: entry short name to be translated
  545. *
  546. * get_table_entry_id() will go over translation table trying to find
  547. * entry that matches given short name. If matching entry is found,
  548. * its id returned to the caller.
  549. *
  550. * returns:
  551. * entry id if translation succeeds
  552. * -1 otherwise
  553. */
  554. int get_table_entry_id(const table_entry_t *table,
  555. const char *table_name, const char *name)
  556. {
  557. const table_entry_t *t;
  558. for (t = table; t->id >= 0; ++t) {
  559. #ifdef CONFIG_NEEDS_MANUAL_RELOC
  560. if (t->sname && strcasecmp(t->sname + gd->reloc_off, name) == 0)
  561. #else
  562. if (t->sname && strcasecmp(t->sname, name) == 0)
  563. #endif
  564. return (t->id);
  565. }
  566. debug("Invalid %s Type: %s\n", table_name, name);
  567. return -1;
  568. }
  569. int genimg_get_os_id(const char *name)
  570. {
  571. return (get_table_entry_id(uimage_os, "OS", name));
  572. }
  573. int genimg_get_arch_id(const char *name)
  574. {
  575. return (get_table_entry_id(uimage_arch, "CPU", name));
  576. }
  577. int genimg_get_type_id(const char *name)
  578. {
  579. return (get_table_entry_id(uimage_type, "Image", name));
  580. }
  581. int genimg_get_comp_id(const char *name)
  582. {
  583. return (get_table_entry_id(uimage_comp, "Compression", name));
  584. }
  585. #ifndef USE_HOSTCC
  586. /**
  587. * genimg_get_kernel_addr_fit - get the real kernel address and return 2
  588. * FIT strings
  589. * @img_addr: a string might contain real image address
  590. * @fit_uname_config: double pointer to a char, will hold pointer to a
  591. * configuration unit name
  592. * @fit_uname_kernel: double pointer to a char, will hold pointer to a subimage
  593. * name
  594. *
  595. * genimg_get_kernel_addr_fit get the real kernel start address from a string
  596. * which is normally the first argv of bootm/bootz
  597. *
  598. * returns:
  599. * kernel start address
  600. */
  601. ulong genimg_get_kernel_addr_fit(char * const img_addr,
  602. const char **fit_uname_config,
  603. const char **fit_uname_kernel)
  604. {
  605. ulong kernel_addr;
  606. /* find out kernel image address */
  607. if (!img_addr) {
  608. kernel_addr = load_addr;
  609. debug("* kernel: default image load address = 0x%08lx\n",
  610. load_addr);
  611. #if defined(CONFIG_FIT)
  612. } else if (fit_parse_conf(img_addr, load_addr, &kernel_addr,
  613. fit_uname_config)) {
  614. debug("* kernel: config '%s' from image at 0x%08lx\n",
  615. *fit_uname_config, kernel_addr);
  616. } else if (fit_parse_subimage(img_addr, load_addr, &kernel_addr,
  617. fit_uname_kernel)) {
  618. debug("* kernel: subimage '%s' from image at 0x%08lx\n",
  619. *fit_uname_kernel, kernel_addr);
  620. #endif
  621. } else {
  622. kernel_addr = simple_strtoul(img_addr, NULL, 16);
  623. debug("* kernel: cmdline image address = 0x%08lx\n",
  624. kernel_addr);
  625. }
  626. return kernel_addr;
  627. }
  628. /**
  629. * genimg_get_kernel_addr() is the simple version of
  630. * genimg_get_kernel_addr_fit(). It ignores those return FIT strings
  631. */
  632. ulong genimg_get_kernel_addr(char * const img_addr)
  633. {
  634. const char *fit_uname_config = NULL;
  635. const char *fit_uname_kernel = NULL;
  636. return genimg_get_kernel_addr_fit(img_addr, &fit_uname_config,
  637. &fit_uname_kernel);
  638. }
  639. /**
  640. * genimg_get_format - get image format type
  641. * @img_addr: image start address
  642. *
  643. * genimg_get_format() checks whether provided address points to a valid
  644. * legacy or FIT image.
  645. *
  646. * New uImage format and FDT blob are based on a libfdt. FDT blob
  647. * may be passed directly or embedded in a FIT image. In both situations
  648. * genimg_get_format() must be able to dectect libfdt header.
  649. *
  650. * returns:
  651. * image format type or IMAGE_FORMAT_INVALID if no image is present
  652. */
  653. int genimg_get_format(const void *img_addr)
  654. {
  655. #if defined(CONFIG_IMAGE_FORMAT_LEGACY)
  656. const image_header_t *hdr;
  657. hdr = (const image_header_t *)img_addr;
  658. if (image_check_magic(hdr))
  659. return IMAGE_FORMAT_LEGACY;
  660. #endif
  661. #if defined(CONFIG_FIT) || defined(CONFIG_OF_LIBFDT)
  662. if (fdt_check_header(img_addr) == 0)
  663. return IMAGE_FORMAT_FIT;
  664. #endif
  665. #ifdef CONFIG_ANDROID_BOOT_IMAGE
  666. if (android_image_check_header(img_addr) == 0)
  667. return IMAGE_FORMAT_ANDROID;
  668. #endif
  669. return IMAGE_FORMAT_INVALID;
  670. }
  671. /**
  672. * genimg_get_image - get image from special storage (if necessary)
  673. * @img_addr: image start address
  674. *
  675. * genimg_get_image() checks if provided image start address is located
  676. * in a dataflash storage. If so, image is moved to a system RAM memory.
  677. *
  678. * returns:
  679. * image start address after possible relocation from special storage
  680. */
  681. ulong genimg_get_image(ulong img_addr)
  682. {
  683. ulong ram_addr = img_addr;
  684. #ifdef CONFIG_HAS_DATAFLASH
  685. ulong h_size, d_size;
  686. if (addr_dataflash(img_addr)) {
  687. void *buf;
  688. /* ger RAM address */
  689. ram_addr = CONFIG_SYS_LOAD_ADDR;
  690. /* get header size */
  691. h_size = image_get_header_size();
  692. #if defined(CONFIG_FIT)
  693. if (sizeof(struct fdt_header) > h_size)
  694. h_size = sizeof(struct fdt_header);
  695. #endif
  696. /* read in header */
  697. debug(" Reading image header from dataflash address "
  698. "%08lx to RAM address %08lx\n", img_addr, ram_addr);
  699. buf = map_sysmem(ram_addr, 0);
  700. read_dataflash(img_addr, h_size, buf);
  701. /* get data size */
  702. switch (genimg_get_format(buf)) {
  703. #if defined(CONFIG_IMAGE_FORMAT_LEGACY)
  704. case IMAGE_FORMAT_LEGACY:
  705. d_size = image_get_data_size(buf);
  706. debug(" Legacy format image found at 0x%08lx, "
  707. "size 0x%08lx\n",
  708. ram_addr, d_size);
  709. break;
  710. #endif
  711. #if defined(CONFIG_FIT)
  712. case IMAGE_FORMAT_FIT:
  713. d_size = fit_get_size(buf) - h_size;
  714. debug(" FIT/FDT format image found at 0x%08lx, "
  715. "size 0x%08lx\n",
  716. ram_addr, d_size);
  717. break;
  718. #endif
  719. default:
  720. printf(" No valid image found at 0x%08lx\n",
  721. img_addr);
  722. return ram_addr;
  723. }
  724. /* read in image data */
  725. debug(" Reading image remaining data from dataflash address "
  726. "%08lx to RAM address %08lx\n", img_addr + h_size,
  727. ram_addr + h_size);
  728. read_dataflash(img_addr + h_size, d_size,
  729. (char *)(buf + h_size));
  730. }
  731. #endif /* CONFIG_HAS_DATAFLASH */
  732. return ram_addr;
  733. }
  734. /**
  735. * fit_has_config - check if there is a valid FIT configuration
  736. * @images: pointer to the bootm command headers structure
  737. *
  738. * fit_has_config() checks if there is a FIT configuration in use
  739. * (if FTI support is present).
  740. *
  741. * returns:
  742. * 0, no FIT support or no configuration found
  743. * 1, configuration found
  744. */
  745. int genimg_has_config(bootm_headers_t *images)
  746. {
  747. #if defined(CONFIG_FIT)
  748. if (images->fit_uname_cfg)
  749. return 1;
  750. #endif
  751. return 0;
  752. }
  753. /**
  754. * boot_get_ramdisk - main ramdisk handling routine
  755. * @argc: command argument count
  756. * @argv: command argument list
  757. * @images: pointer to the bootm images structure
  758. * @arch: expected ramdisk architecture
  759. * @rd_start: pointer to a ulong variable, will hold ramdisk start address
  760. * @rd_end: pointer to a ulong variable, will hold ramdisk end
  761. *
  762. * boot_get_ramdisk() is responsible for finding a valid ramdisk image.
  763. * Curently supported are the following ramdisk sources:
  764. * - multicomponent kernel/ramdisk image,
  765. * - commandline provided address of decicated ramdisk image.
  766. *
  767. * returns:
  768. * 0, if ramdisk image was found and valid, or skiped
  769. * rd_start and rd_end are set to ramdisk start/end addresses if
  770. * ramdisk image is found and valid
  771. *
  772. * 1, if ramdisk image is found but corrupted, or invalid
  773. * rd_start and rd_end are set to 0 if no ramdisk exists
  774. */
  775. int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
  776. uint8_t arch, ulong *rd_start, ulong *rd_end)
  777. {
  778. ulong rd_addr, rd_load;
  779. ulong rd_data, rd_len;
  780. #if defined(CONFIG_IMAGE_FORMAT_LEGACY)
  781. const image_header_t *rd_hdr;
  782. #endif
  783. void *buf;
  784. #ifdef CONFIG_SUPPORT_RAW_INITRD
  785. char *end;
  786. #endif
  787. #if defined(CONFIG_FIT)
  788. const char *fit_uname_config = images->fit_uname_cfg;
  789. const char *fit_uname_ramdisk = NULL;
  790. ulong default_addr;
  791. int rd_noffset;
  792. #endif
  793. const char *select = NULL;
  794. *rd_start = 0;
  795. *rd_end = 0;
  796. if (argc >= 2)
  797. select = argv[1];
  798. /*
  799. * Look for a '-' which indicates to ignore the
  800. * ramdisk argument
  801. */
  802. if (select && strcmp(select, "-") == 0) {
  803. debug("## Skipping init Ramdisk\n");
  804. rd_len = rd_data = 0;
  805. } else if (select || genimg_has_config(images)) {
  806. #if defined(CONFIG_FIT)
  807. if (select) {
  808. /*
  809. * If the init ramdisk comes from the FIT image and
  810. * the FIT image address is omitted in the command
  811. * line argument, try to use os FIT image address or
  812. * default load address.
  813. */
  814. if (images->fit_uname_os)
  815. default_addr = (ulong)images->fit_hdr_os;
  816. else
  817. default_addr = load_addr;
  818. if (fit_parse_conf(select, default_addr,
  819. &rd_addr, &fit_uname_config)) {
  820. debug("* ramdisk: config '%s' from image at "
  821. "0x%08lx\n",
  822. fit_uname_config, rd_addr);
  823. } else if (fit_parse_subimage(select, default_addr,
  824. &rd_addr, &fit_uname_ramdisk)) {
  825. debug("* ramdisk: subimage '%s' from image at "
  826. "0x%08lx\n",
  827. fit_uname_ramdisk, rd_addr);
  828. } else
  829. #endif
  830. {
  831. rd_addr = simple_strtoul(select, NULL, 16);
  832. debug("* ramdisk: cmdline image address = "
  833. "0x%08lx\n",
  834. rd_addr);
  835. }
  836. #if defined(CONFIG_FIT)
  837. } else {
  838. /* use FIT configuration provided in first bootm
  839. * command argument. If the property is not defined,
  840. * quit silently.
  841. */
  842. rd_addr = map_to_sysmem(images->fit_hdr_os);
  843. rd_noffset = fit_get_node_from_config(images,
  844. FIT_RAMDISK_PROP, rd_addr);
  845. if (rd_noffset == -ENOLINK)
  846. return 0;
  847. else if (rd_noffset < 0)
  848. return 1;
  849. }
  850. #endif
  851. /* copy from dataflash if needed */
  852. rd_addr = genimg_get_image(rd_addr);
  853. /*
  854. * Check if there is an initrd image at the
  855. * address provided in the second bootm argument
  856. * check image type, for FIT images get FIT node.
  857. */
  858. buf = map_sysmem(rd_addr, 0);
  859. switch (genimg_get_format(buf)) {
  860. #if defined(CONFIG_IMAGE_FORMAT_LEGACY)
  861. case IMAGE_FORMAT_LEGACY:
  862. printf("## Loading init Ramdisk from Legacy "
  863. "Image at %08lx ...\n", rd_addr);
  864. bootstage_mark(BOOTSTAGE_ID_CHECK_RAMDISK);
  865. rd_hdr = image_get_ramdisk(rd_addr, arch,
  866. images->verify);
  867. if (rd_hdr == NULL)
  868. return 1;
  869. rd_data = image_get_data(rd_hdr);
  870. rd_len = image_get_data_size(rd_hdr);
  871. rd_load = image_get_load(rd_hdr);
  872. break;
  873. #endif
  874. #if defined(CONFIG_FIT)
  875. case IMAGE_FORMAT_FIT:
  876. rd_noffset = fit_image_load(images,
  877. rd_addr, &fit_uname_ramdisk,
  878. &fit_uname_config, arch,
  879. IH_TYPE_RAMDISK,
  880. BOOTSTAGE_ID_FIT_RD_START,
  881. FIT_LOAD_OPTIONAL_NON_ZERO,
  882. &rd_data, &rd_len);
  883. if (rd_noffset < 0)
  884. return 1;
  885. images->fit_hdr_rd = map_sysmem(rd_addr, 0);
  886. images->fit_uname_rd = fit_uname_ramdisk;
  887. images->fit_noffset_rd = rd_noffset;
  888. break;
  889. #endif
  890. default:
  891. #ifdef CONFIG_SUPPORT_RAW_INITRD
  892. end = NULL;
  893. if (select)
  894. end = strchr(select, ':');
  895. if (end) {
  896. rd_len = simple_strtoul(++end, NULL, 16);
  897. rd_data = rd_addr;
  898. } else
  899. #endif
  900. {
  901. puts("Wrong Ramdisk Image Format\n");
  902. rd_data = rd_len = rd_load = 0;
  903. return 1;
  904. }
  905. }
  906. } else if (images->legacy_hdr_valid &&
  907. image_check_type(&images->legacy_hdr_os_copy,
  908. IH_TYPE_MULTI)) {
  909. /*
  910. * Now check if we have a legacy mult-component image,
  911. * get second entry data start address and len.
  912. */
  913. bootstage_mark(BOOTSTAGE_ID_RAMDISK);
  914. printf("## Loading init Ramdisk from multi component "
  915. "Legacy Image at %08lx ...\n",
  916. (ulong)images->legacy_hdr_os);
  917. image_multi_getimg(images->legacy_hdr_os, 1, &rd_data, &rd_len);
  918. }
  919. #ifdef CONFIG_ANDROID_BOOT_IMAGE
  920. else if ((genimg_get_format((void *)images->os.start)
  921. == IMAGE_FORMAT_ANDROID) &&
  922. (!android_image_get_ramdisk((void *)images->os.start,
  923. &rd_data, &rd_len))) {
  924. /* empty */
  925. }
  926. #endif
  927. else {
  928. /*
  929. * no initrd image
  930. */
  931. bootstage_mark(BOOTSTAGE_ID_NO_RAMDISK);
  932. rd_len = rd_data = 0;
  933. }
  934. if (!rd_data) {
  935. debug("## No init Ramdisk\n");
  936. } else {
  937. *rd_start = rd_data;
  938. *rd_end = rd_data + rd_len;
  939. }
  940. debug(" ramdisk start = 0x%08lx, ramdisk end = 0x%08lx\n",
  941. *rd_start, *rd_end);
  942. return 0;
  943. }
  944. #ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
  945. /**
  946. * boot_ramdisk_high - relocate init ramdisk
  947. * @lmb: pointer to lmb handle, will be used for memory mgmt
  948. * @rd_data: ramdisk data start address
  949. * @rd_len: ramdisk data length
  950. * @initrd_start: pointer to a ulong variable, will hold final init ramdisk
  951. * start address (after possible relocation)
  952. * @initrd_end: pointer to a ulong variable, will hold final init ramdisk
  953. * end address (after possible relocation)
  954. *
  955. * boot_ramdisk_high() takes a relocation hint from "initrd_high" environment
  956. * variable and if requested ramdisk data is moved to a specified location.
  957. *
  958. * Initrd_start and initrd_end are set to final (after relocation) ramdisk
  959. * start/end addresses if ramdisk image start and len were provided,
  960. * otherwise set initrd_start and initrd_end set to zeros.
  961. *
  962. * returns:
  963. * 0 - success
  964. * -1 - failure
  965. */
  966. int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len,
  967. ulong *initrd_start, ulong *initrd_end)
  968. {
  969. char *s;
  970. ulong initrd_high;
  971. int initrd_copy_to_ram = 1;
  972. if ((s = getenv("initrd_high")) != NULL) {
  973. /* a value of "no" or a similar string will act like 0,
  974. * turning the "load high" feature off. This is intentional.
  975. */
  976. initrd_high = simple_strtoul(s, NULL, 16);
  977. if (initrd_high == ~0)
  978. initrd_copy_to_ram = 0;
  979. } else {
  980. /* not set, no restrictions to load high */
  981. initrd_high = ~0;
  982. }
  983. #ifdef CONFIG_LOGBUFFER
  984. /* Prevent initrd from overwriting logbuffer */
  985. lmb_reserve(lmb, logbuffer_base() - LOGBUFF_OVERHEAD, LOGBUFF_RESERVE);
  986. #endif
  987. debug("## initrd_high = 0x%08lx, copy_to_ram = %d\n",
  988. initrd_high, initrd_copy_to_ram);
  989. if (rd_data) {
  990. if (!initrd_copy_to_ram) { /* zero-copy ramdisk support */
  991. debug(" in-place initrd\n");
  992. *initrd_start = rd_data;
  993. *initrd_end = rd_data + rd_len;
  994. lmb_reserve(lmb, rd_data, rd_len);
  995. } else {
  996. if (initrd_high)
  997. *initrd_start = (ulong)lmb_alloc_base(lmb,
  998. rd_len, 0x1000, initrd_high);
  999. else
  1000. *initrd_start = (ulong)lmb_alloc(lmb, rd_len,
  1001. 0x1000);
  1002. if (*initrd_start == 0) {
  1003. puts("ramdisk - allocation error\n");
  1004. goto error;
  1005. }
  1006. bootstage_mark(BOOTSTAGE_ID_COPY_RAMDISK);
  1007. *initrd_end = *initrd_start + rd_len;
  1008. printf(" Loading Ramdisk to %08lx, end %08lx ... ",
  1009. *initrd_start, *initrd_end);
  1010. memmove_wd((void *)*initrd_start,
  1011. (void *)rd_data, rd_len, CHUNKSZ);
  1012. #ifdef CONFIG_MP
  1013. /*
  1014. * Ensure the image is flushed to memory to handle
  1015. * AMP boot scenarios in which we might not be
  1016. * HW cache coherent
  1017. */
  1018. flush_cache((unsigned long)*initrd_start, rd_len);
  1019. #endif
  1020. puts("OK\n");
  1021. }
  1022. } else {
  1023. *initrd_start = 0;
  1024. *initrd_end = 0;
  1025. }
  1026. debug(" ramdisk load start = 0x%08lx, ramdisk load end = 0x%08lx\n",
  1027. *initrd_start, *initrd_end);
  1028. return 0;
  1029. error:
  1030. return -1;
  1031. }
  1032. #endif /* CONFIG_SYS_BOOT_RAMDISK_HIGH */
  1033. int boot_get_setup(bootm_headers_t *images, uint8_t arch,
  1034. ulong *setup_start, ulong *setup_len)
  1035. {
  1036. #if defined(CONFIG_FIT)
  1037. return boot_get_setup_fit(images, arch, setup_start, setup_len);
  1038. #else
  1039. return -ENOENT;
  1040. #endif
  1041. }
  1042. #if defined(CONFIG_FIT)
  1043. int boot_get_loadable(int argc, char * const argv[], bootm_headers_t *images,
  1044. uint8_t arch, const ulong *ld_start, ulong * const ld_len)
  1045. {
  1046. /*
  1047. * These variables are used to hold the current image location
  1048. * in system memory.
  1049. */
  1050. ulong tmp_img_addr;
  1051. /*
  1052. * These two variables are requirements for fit_image_load, but
  1053. * their values are not used
  1054. */
  1055. ulong img_data, img_len;
  1056. void *buf;
  1057. int loadables_index;
  1058. int conf_noffset;
  1059. int fit_img_result;
  1060. char *uname;
  1061. /* Check to see if the images struct has a FIT configuration */
  1062. if (!genimg_has_config(images)) {
  1063. debug("## FIT configuration was not specified\n");
  1064. return 0;
  1065. }
  1066. /*
  1067. * Obtain the os FIT header from the images struct
  1068. * copy from dataflash if needed
  1069. */
  1070. tmp_img_addr = map_to_sysmem(images->fit_hdr_os);
  1071. tmp_img_addr = genimg_get_image(tmp_img_addr);
  1072. buf = map_sysmem(tmp_img_addr, 0);
  1073. /*
  1074. * Check image type. For FIT images get FIT node
  1075. * and attempt to locate a generic binary.
  1076. */
  1077. switch (genimg_get_format(buf)) {
  1078. case IMAGE_FORMAT_FIT:
  1079. conf_noffset = fit_conf_get_node(buf, images->fit_uname_cfg);
  1080. for (loadables_index = 0;
  1081. !fdt_get_string_index(buf, conf_noffset,
  1082. FIT_LOADABLE_PROP,
  1083. loadables_index,
  1084. (const char **)&uname) > 0;
  1085. loadables_index++)
  1086. {
  1087. fit_img_result = fit_image_load(images,
  1088. tmp_img_addr,
  1089. (const char **)&uname,
  1090. &(images->fit_uname_cfg), arch,
  1091. IH_TYPE_LOADABLE,
  1092. BOOTSTAGE_ID_FIT_LOADABLE_START,
  1093. FIT_LOAD_OPTIONAL_NON_ZERO,
  1094. &img_data, &img_len);
  1095. if (fit_img_result < 0) {
  1096. /* Something went wrong! */
  1097. return fit_img_result;
  1098. }
  1099. }
  1100. break;
  1101. default:
  1102. printf("The given image format is not supported (corrupt?)\n");
  1103. return 1;
  1104. }
  1105. return 0;
  1106. }
  1107. #endif
  1108. #ifdef CONFIG_SYS_BOOT_GET_CMDLINE
  1109. /**
  1110. * boot_get_cmdline - allocate and initialize kernel cmdline
  1111. * @lmb: pointer to lmb handle, will be used for memory mgmt
  1112. * @cmd_start: pointer to a ulong variable, will hold cmdline start
  1113. * @cmd_end: pointer to a ulong variable, will hold cmdline end
  1114. *
  1115. * boot_get_cmdline() allocates space for kernel command line below
  1116. * BOOTMAPSZ + getenv_bootm_low() address. If "bootargs" U-boot environemnt
  1117. * variable is present its contents is copied to allocated kernel
  1118. * command line.
  1119. *
  1120. * returns:
  1121. * 0 - success
  1122. * -1 - failure
  1123. */
  1124. int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end)
  1125. {
  1126. char *cmdline;
  1127. char *s;
  1128. cmdline = (char *)(ulong)lmb_alloc_base(lmb, CONFIG_SYS_BARGSIZE, 0xf,
  1129. getenv_bootm_mapsize() + getenv_bootm_low());
  1130. if (cmdline == NULL)
  1131. return -1;
  1132. if ((s = getenv("bootargs")) == NULL)
  1133. s = "";
  1134. strcpy(cmdline, s);
  1135. *cmd_start = (ulong) & cmdline[0];
  1136. *cmd_end = *cmd_start + strlen(cmdline);
  1137. debug("## cmdline at 0x%08lx ... 0x%08lx\n", *cmd_start, *cmd_end);
  1138. return 0;
  1139. }
  1140. #endif /* CONFIG_SYS_BOOT_GET_CMDLINE */
  1141. #ifdef CONFIG_SYS_BOOT_GET_KBD
  1142. /**
  1143. * boot_get_kbd - allocate and initialize kernel copy of board info
  1144. * @lmb: pointer to lmb handle, will be used for memory mgmt
  1145. * @kbd: double pointer to board info data
  1146. *
  1147. * boot_get_kbd() allocates space for kernel copy of board info data below
  1148. * BOOTMAPSZ + getenv_bootm_low() address and kernel board info is initialized
  1149. * with the current u-boot board info data.
  1150. *
  1151. * returns:
  1152. * 0 - success
  1153. * -1 - failure
  1154. */
  1155. int boot_get_kbd(struct lmb *lmb, bd_t **kbd)
  1156. {
  1157. *kbd = (bd_t *)(ulong)lmb_alloc_base(lmb, sizeof(bd_t), 0xf,
  1158. getenv_bootm_mapsize() + getenv_bootm_low());
  1159. if (*kbd == NULL)
  1160. return -1;
  1161. **kbd = *(gd->bd);
  1162. debug("## kernel board info at 0x%08lx\n", (ulong)*kbd);
  1163. #if defined(DEBUG) && defined(CONFIG_CMD_BDI)
  1164. do_bdinfo(NULL, 0, 0, NULL);
  1165. #endif
  1166. return 0;
  1167. }
  1168. #endif /* CONFIG_SYS_BOOT_GET_KBD */
  1169. #ifdef CONFIG_LMB
  1170. int image_setup_linux(bootm_headers_t *images)
  1171. {
  1172. ulong of_size = images->ft_len;
  1173. char **of_flat_tree = &images->ft_addr;
  1174. ulong *initrd_start = &images->initrd_start;
  1175. ulong *initrd_end = &images->initrd_end;
  1176. struct lmb *lmb = &images->lmb;
  1177. ulong rd_len;
  1178. int ret;
  1179. if (IMAGE_ENABLE_OF_LIBFDT)
  1180. boot_fdt_add_mem_rsv_regions(lmb, *of_flat_tree);
  1181. if (IMAGE_BOOT_GET_CMDLINE) {
  1182. ret = boot_get_cmdline(lmb, &images->cmdline_start,
  1183. &images->cmdline_end);
  1184. if (ret) {
  1185. puts("ERROR with allocation of cmdline\n");
  1186. return ret;
  1187. }
  1188. }
  1189. if (IMAGE_ENABLE_RAMDISK_HIGH) {
  1190. rd_len = images->rd_end - images->rd_start;
  1191. ret = boot_ramdisk_high(lmb, images->rd_start, rd_len,
  1192. initrd_start, initrd_end);
  1193. if (ret)
  1194. return ret;
  1195. }
  1196. if (IMAGE_ENABLE_OF_LIBFDT) {
  1197. ret = boot_relocate_fdt(lmb, of_flat_tree, &of_size);
  1198. if (ret)
  1199. return ret;
  1200. }
  1201. if (IMAGE_ENABLE_OF_LIBFDT && of_size) {
  1202. ret = image_setup_libfdt(images, *of_flat_tree, of_size, lmb);
  1203. if (ret)
  1204. return ret;
  1205. }
  1206. return 0;
  1207. }
  1208. #endif /* CONFIG_LMB */
  1209. #endif /* !USE_HOSTCC */