boot-mode.c 2.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116
  1. /*
  2. * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
  3. *
  4. * SPDX-License-Identifier: GPL-2.0+
  5. */
  6. #include <common.h>
  7. #include <mmc.h>
  8. #include <spl.h>
  9. #include <linux/err.h>
  10. #include "../sbc/sbc-regs.h"
  11. #include "../soc-info.h"
  12. #include "boot-device.h"
  13. u32 spl_boot_device_raw(void)
  14. {
  15. if (boot_is_swapped())
  16. return BOOT_DEVICE_NOR;
  17. switch (uniphier_get_soc_type()) {
  18. #if defined(CONFIG_ARCH_UNIPHIER_SLD3)
  19. case SOC_UNIPHIER_SLD3:
  20. return ph1_sld3_boot_device();
  21. #endif
  22. #if defined(CONFIG_ARCH_UNIPHIER_LD4) || defined(CONFIG_ARCH_UNIPHIER_PRO4) || \
  23. defined(CONFIG_ARCH_UNIPHIER_SLD8)
  24. case SOC_UNIPHIER_LD4:
  25. case SOC_UNIPHIER_PRO4:
  26. case SOC_UNIPHIER_SLD8:
  27. return ph1_ld4_boot_device();
  28. #endif
  29. #if defined(CONFIG_ARCH_UNIPHIER_PRO5)
  30. case SOC_UNIPHIER_PRO5:
  31. return ph1_pro5_boot_device();
  32. #endif
  33. #if defined(CONFIG_ARCH_UNIPHIER_PXS2) || defined(CONFIG_ARCH_UNIPHIER_LD6B)
  34. case SOC_UNIPHIER_PXS2:
  35. case SOC_UNIPHIER_LD6B:
  36. return proxstream2_boot_device();
  37. #endif
  38. default:
  39. return BOOT_DEVICE_NONE;
  40. }
  41. }
  42. u32 spl_boot_device(void)
  43. {
  44. u32 ret;
  45. ret = spl_boot_device_raw();
  46. return ret == BOOT_DEVICE_USB ? BOOT_DEVICE_NOR : ret;
  47. }
  48. u32 spl_boot_mode(void)
  49. {
  50. struct mmc *mmc;
  51. /*
  52. * work around a bug in the Boot ROM of PH1-sLD3, LD4, Pro4, and sLD8:
  53. *
  54. * The boot ROM in these SoCs breaks the PARTITION_CONFIG [179] of
  55. * Extended CSD register; when switching to the Boot Partition 1, the
  56. * Boot ROM should issue the SWITCH command (CMD6) with Set Bits for
  57. * the Access Bits, but in fact it uses Write Byte for the Access Bits.
  58. * As a result, the BOOT_PARTITION_ENABLE field of the PARTITION_CONFIG
  59. * is lost. This bug was fixed for PH1-Pro5 and later SoCs.
  60. *
  61. * Fixup mmc->part_config here because it is used to determine the
  62. * partition which the U-Boot image is read from.
  63. */
  64. mmc = find_mmc_device(0);
  65. mmc->part_config &= ~EXT_CSD_BOOT_PART_NUM(PART_ACCESS_MASK);
  66. mmc->part_config |= EXT_CSD_BOOT_PARTITION_ENABLE;
  67. return MMCSD_MODE_EMMCBOOT;
  68. }
  69. #if defined(CONFIG_DM_MMC) && !defined(CONFIG_SPL_BUILD)
  70. static int find_first_mmc_device(void)
  71. {
  72. struct mmc *mmc;
  73. int i;
  74. for (i = 0; (mmc = find_mmc_device(i)); i++) {
  75. if (!mmc_init(mmc) && IS_MMC(mmc))
  76. return i;
  77. }
  78. return -ENODEV;
  79. }
  80. int mmc_get_env_dev(void)
  81. {
  82. return find_first_mmc_device();
  83. }
  84. static int do_mmcsetn(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
  85. {
  86. int dev;
  87. dev = find_first_mmc_device();
  88. if (dev < 0)
  89. return CMD_RET_FAILURE;
  90. setenv_ulong("mmc_first_dev", dev);
  91. return CMD_RET_SUCCESS;
  92. }
  93. U_BOOT_CMD(
  94. mmcsetn, 1, 1, do_mmcsetn,
  95. "Set the first MMC (not SD) dev number to \"mmc_first_dev\" enviroment",
  96. ""
  97. );
  98. #endif