generic.c 8.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382
  1. /*
  2. * Copyright (c) 2008 Eric Jarrige <eric.jarrige@armadeus.org>
  3. * Copyright (c) 2009 Ilya Yanok <yanok@emcraft.com>
  4. *
  5. * This program is free software; you can redistribute it and/or
  6. * modify it under the terms of the GNU General Public License as
  7. * published by the Free Software Foundation; either version 2 of
  8. * the License, or (at your option) any later version.
  9. *
  10. * This program is distributed in the hope that it will be useful,
  11. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13. * GNU General Public License for more details.
  14. *
  15. * You should have received a copy of the GNU General Public License
  16. * along with this program; if not, write to the Free Software
  17. * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  18. * MA 02111-1307 USA
  19. */
  20. #include <common.h>
  21. #include <div64.h>
  22. #include <netdev.h>
  23. #include <asm/io.h>
  24. #include <asm/arch/imx-regs.h>
  25. #include <asm/arch/clock.h>
  26. #include <asm/arch/gpio.h>
  27. #ifdef CONFIG_MXC_MMC
  28. #include <asm/arch/mxcmmc.h>
  29. #endif
  30. /*
  31. * get the system pll clock in Hz
  32. *
  33. * mfi + mfn / (mfd +1)
  34. * f = 2 * f_ref * --------------------
  35. * pd + 1
  36. */
  37. static unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref)
  38. {
  39. unsigned int mfi = (pll >> 10) & 0xf;
  40. unsigned int mfn = pll & 0x3ff;
  41. unsigned int mfd = (pll >> 16) & 0x3ff;
  42. unsigned int pd = (pll >> 26) & 0xf;
  43. mfi = mfi <= 5 ? 5 : mfi;
  44. return lldiv(2 * (u64)f_ref * (mfi * (mfd + 1) + mfn),
  45. (mfd + 1) * (pd + 1));
  46. }
  47. static ulong clk_in_32k(void)
  48. {
  49. return 1024 * CONFIG_MX27_CLK32;
  50. }
  51. static ulong clk_in_26m(void)
  52. {
  53. struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
  54. if (readl(&pll->cscr) & CSCR_OSC26M_DIV1P5) {
  55. /* divide by 1.5 */
  56. return 26000000 * 2 / 3;
  57. } else {
  58. return 26000000;
  59. }
  60. }
  61. static ulong imx_get_mpllclk(void)
  62. {
  63. struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
  64. ulong cscr = readl(&pll->cscr);
  65. ulong fref;
  66. if (cscr & CSCR_MCU_SEL)
  67. fref = clk_in_26m();
  68. else
  69. fref = clk_in_32k();
  70. return imx_decode_pll(readl(&pll->mpctl0), fref);
  71. }
  72. static ulong imx_get_armclk(void)
  73. {
  74. struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
  75. ulong cscr = readl(&pll->cscr);
  76. ulong fref = imx_get_mpllclk();
  77. ulong div;
  78. if (!(cscr & CSCR_ARM_SRC_MPLL))
  79. fref = lldiv((fref * 2), 3);
  80. div = ((cscr >> 12) & 0x3) + 1;
  81. return lldiv(fref, div);
  82. }
  83. static ulong imx_get_ahbclk(void)
  84. {
  85. struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
  86. ulong cscr = readl(&pll->cscr);
  87. ulong fref = imx_get_mpllclk();
  88. ulong div;
  89. div = ((cscr >> 8) & 0x3) + 1;
  90. return lldiv(fref * 2, 3 * div);
  91. }
  92. static __attribute__((unused)) ulong imx_get_spllclk(void)
  93. {
  94. struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
  95. ulong cscr = readl(&pll->cscr);
  96. ulong fref;
  97. if (cscr & CSCR_SP_SEL)
  98. fref = clk_in_26m();
  99. else
  100. fref = clk_in_32k();
  101. return imx_decode_pll(readl(&pll->spctl0), fref);
  102. }
  103. static ulong imx_decode_perclk(ulong div)
  104. {
  105. return lldiv((imx_get_mpllclk() * 2), (div * 3));
  106. }
  107. static ulong imx_get_perclk1(void)
  108. {
  109. struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
  110. return imx_decode_perclk((readl(&pll->pcdr1) & 0x3f) + 1);
  111. }
  112. static ulong imx_get_perclk2(void)
  113. {
  114. struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
  115. return imx_decode_perclk(((readl(&pll->pcdr1) >> 8) & 0x3f) + 1);
  116. }
  117. static __attribute__((unused)) ulong imx_get_perclk3(void)
  118. {
  119. struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
  120. return imx_decode_perclk(((readl(&pll->pcdr1) >> 16) & 0x3f) + 1);
  121. }
  122. static __attribute__((unused)) ulong imx_get_perclk4(void)
  123. {
  124. struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
  125. return imx_decode_perclk(((readl(&pll->pcdr1) >> 24) & 0x3f) + 1);
  126. }
  127. unsigned int mxc_get_clock(enum mxc_clock clk)
  128. {
  129. switch (clk) {
  130. case MXC_ARM_CLK:
  131. return imx_get_armclk();
  132. case MXC_UART_CLK:
  133. return imx_get_perclk1();
  134. case MXC_FEC_CLK:
  135. return imx_get_ahbclk();
  136. case MXC_ESDHC_CLK:
  137. return imx_get_perclk2();
  138. }
  139. return -1;
  140. }
  141. #if defined(CONFIG_DISPLAY_CPUINFO)
  142. int print_cpuinfo (void)
  143. {
  144. char buf[32];
  145. printf("CPU: Freescale i.MX27 at %s MHz\n\n",
  146. strmhz(buf, imx_get_mpllclk()));
  147. return 0;
  148. }
  149. #endif
  150. int cpu_eth_init(bd_t *bis)
  151. {
  152. #if defined(CONFIG_FEC_MXC)
  153. struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
  154. /* enable FEC clock */
  155. writel(readl(&pll->pccr1) | PCCR1_HCLK_FEC, &pll->pccr1);
  156. writel(readl(&pll->pccr0) | PCCR0_FEC_EN, &pll->pccr0);
  157. return fecmxc_initialize(bis);
  158. #else
  159. return 0;
  160. #endif
  161. }
  162. /*
  163. * Initializes on-chip MMC controllers.
  164. * to override, implement board_mmc_init()
  165. */
  166. int cpu_mmc_init(bd_t *bis)
  167. {
  168. #ifdef CONFIG_MXC_MMC
  169. return mxc_mmc_init(bis);
  170. #else
  171. return 0;
  172. #endif
  173. }
  174. void imx_gpio_mode(int gpio_mode)
  175. {
  176. struct gpio_port_regs *regs = (struct gpio_port_regs *)IMX_GPIO_BASE;
  177. unsigned int pin = gpio_mode & GPIO_PIN_MASK;
  178. unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
  179. unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
  180. unsigned int aout = (gpio_mode & GPIO_AOUT_MASK) >> GPIO_AOUT_SHIFT;
  181. unsigned int bout = (gpio_mode & GPIO_BOUT_MASK) >> GPIO_BOUT_SHIFT;
  182. unsigned int tmp;
  183. /* Pullup enable */
  184. if (gpio_mode & GPIO_PUEN) {
  185. writel(readl(&regs->port[port].puen) | (1 << pin),
  186. &regs->port[port].puen);
  187. } else {
  188. writel(readl(&regs->port[port].puen) & ~(1 << pin),
  189. &regs->port[port].puen);
  190. }
  191. /* Data direction */
  192. if (gpio_mode & GPIO_OUT) {
  193. writel(readl(&regs->port[port].gpio_dir) | 1 << pin,
  194. &regs->port[port].gpio_dir);
  195. } else {
  196. writel(readl(&regs->port[port].gpio_dir) & ~(1 << pin),
  197. &regs->port[port].gpio_dir);
  198. }
  199. /* Primary / alternate function */
  200. if (gpio_mode & GPIO_AF) {
  201. writel(readl(&regs->port[port].gpr) | (1 << pin),
  202. &regs->port[port].gpr);
  203. } else {
  204. writel(readl(&regs->port[port].gpr) & ~(1 << pin),
  205. &regs->port[port].gpr);
  206. }
  207. /* use as gpio? */
  208. if (!(gpio_mode & (GPIO_PF | GPIO_AF))) {
  209. writel(readl(&regs->port[port].gius) | (1 << pin),
  210. &regs->port[port].gius);
  211. } else {
  212. writel(readl(&regs->port[port].gius) & ~(1 << pin),
  213. &regs->port[port].gius);
  214. }
  215. /* Output / input configuration */
  216. if (pin < 16) {
  217. tmp = readl(&regs->port[port].ocr1);
  218. tmp &= ~(3 << (pin * 2));
  219. tmp |= (ocr << (pin * 2));
  220. writel(tmp, &regs->port[port].ocr1);
  221. writel(readl(&regs->port[port].iconfa1) & ~(3 << (pin * 2)),
  222. &regs->port[port].iconfa1);
  223. writel(readl(&regs->port[port].iconfa1) | aout << (pin * 2),
  224. &regs->port[port].iconfa1);
  225. writel(readl(&regs->port[port].iconfb1) & ~(3 << (pin * 2)),
  226. &regs->port[port].iconfb1);
  227. writel(readl(&regs->port[port].iconfb1) | bout << (pin * 2),
  228. &regs->port[port].iconfb1);
  229. } else {
  230. pin -= 16;
  231. tmp = readl(&regs->port[port].ocr2);
  232. tmp &= ~(3 << (pin * 2));
  233. tmp |= (ocr << (pin * 2));
  234. writel(tmp, &regs->port[port].ocr2);
  235. writel(readl(&regs->port[port].iconfa2) & ~(3 << (pin * 2)),
  236. &regs->port[port].iconfa2);
  237. writel(readl(&regs->port[port].iconfa2) | aout << (pin * 2),
  238. &regs->port[port].iconfa2);
  239. writel(readl(&regs->port[port].iconfb2) & ~(3 << (pin * 2)),
  240. &regs->port[port].iconfb2);
  241. writel(readl(&regs->port[port].iconfb2) | bout << (pin * 2),
  242. &regs->port[port].iconfb2);
  243. }
  244. }
  245. #ifdef CONFIG_MXC_UART
  246. void mx27_uart1_init_pins(void)
  247. {
  248. int i;
  249. unsigned int mode[] = {
  250. PE12_PF_UART1_TXD,
  251. PE13_PF_UART1_RXD,
  252. };
  253. for (i = 0; i < ARRAY_SIZE(mode); i++)
  254. imx_gpio_mode(mode[i]);
  255. }
  256. #endif /* CONFIG_MXC_UART */
  257. #ifdef CONFIG_FEC_MXC
  258. void mx27_fec_init_pins(void)
  259. {
  260. int i;
  261. unsigned int mode[] = {
  262. PD0_AIN_FEC_TXD0,
  263. PD1_AIN_FEC_TXD1,
  264. PD2_AIN_FEC_TXD2,
  265. PD3_AIN_FEC_TXD3,
  266. PD4_AOUT_FEC_RX_ER,
  267. PD5_AOUT_FEC_RXD1,
  268. PD6_AOUT_FEC_RXD2,
  269. PD7_AOUT_FEC_RXD3,
  270. PD8_AF_FEC_MDIO,
  271. PD9_AIN_FEC_MDC | GPIO_PUEN,
  272. PD10_AOUT_FEC_CRS,
  273. PD11_AOUT_FEC_TX_CLK,
  274. PD12_AOUT_FEC_RXD0,
  275. PD13_AOUT_FEC_RX_DV,
  276. PD14_AOUT_FEC_CLR,
  277. PD15_AOUT_FEC_COL,
  278. PD16_AIN_FEC_TX_ER,
  279. PF23_AIN_FEC_TX_EN,
  280. };
  281. for (i = 0; i < ARRAY_SIZE(mode); i++)
  282. imx_gpio_mode(mode[i]);
  283. }
  284. void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
  285. {
  286. int i;
  287. struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
  288. struct fuse_bank *bank = &iim->bank[0];
  289. struct fuse_bank0_regs *fuse =
  290. (struct fuse_bank0_regs *)bank->fuse_regs;
  291. for (i = 0; i < 6; i++)
  292. mac[6 - 1 - i] = readl(&fuse->mac_addr[i]) & 0xff;
  293. }
  294. #endif /* CONFIG_FEC_MXC */
  295. #ifdef CONFIG_MXC_MMC
  296. void mx27_sd1_init_pins(void)
  297. {
  298. int i;
  299. unsigned int mode[] = {
  300. PE18_PF_SD1_D0,
  301. PE19_PF_SD1_D1,
  302. PE20_PF_SD1_D2,
  303. PE21_PF_SD1_D3,
  304. PE22_PF_SD1_CMD,
  305. PE23_PF_SD1_CLK,
  306. };
  307. for (i = 0; i < ARRAY_SIZE(mode); i++)
  308. imx_gpio_mode(mode[i]);
  309. }
  310. void mx27_sd2_init_pins(void)
  311. {
  312. int i;
  313. unsigned int mode[] = {
  314. PB4_PF_SD2_D0,
  315. PB5_PF_SD2_D1,
  316. PB6_PF_SD2_D2,
  317. PB7_PF_SD2_D3,
  318. PB8_PF_SD2_CMD,
  319. PB9_PF_SD2_CLK,
  320. };
  321. for (i = 0; i < ARRAY_SIZE(mode); i++)
  322. imx_gpio_mode(mode[i]);
  323. }
  324. #endif /* CONFIG_MXC_MMC */