designware.c 14 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586
  1. /*
  2. * (C) Copyright 2010
  3. * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
  4. *
  5. * See file CREDITS for list of people who contributed to this
  6. * project.
  7. *
  8. * This program is free software; you can redistribute it and/or
  9. * modify it under the terms of the GNU General Public License as
  10. * published by the Free Software Foundation; either version 2 of
  11. * the License, or (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program; if not, write to the Free Software
  20. * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21. * MA 02111-1307 USA
  22. */
  23. /*
  24. * Designware ethernet IP driver for u-boot
  25. */
  26. #include <common.h>
  27. #include <miiphy.h>
  28. #include <malloc.h>
  29. #include <linux/err.h>
  30. #include <asm/io.h>
  31. #include "designware.h"
  32. static int configure_phy(struct eth_device *dev);
  33. static void tx_descs_init(struct eth_device *dev)
  34. {
  35. struct dw_eth_dev *priv = dev->priv;
  36. struct eth_dma_regs *dma_p = priv->dma_regs_p;
  37. struct dmamacdescr *desc_table_p = &priv->tx_mac_descrtable[0];
  38. char *txbuffs = &priv->txbuffs[0];
  39. struct dmamacdescr *desc_p;
  40. u32 idx;
  41. for (idx = 0; idx < CONFIG_TX_DESCR_NUM; idx++) {
  42. desc_p = &desc_table_p[idx];
  43. desc_p->dmamac_addr = &txbuffs[idx * CONFIG_ETH_BUFSIZE];
  44. desc_p->dmamac_next = &desc_table_p[idx + 1];
  45. #if defined(CONFIG_DW_ALTDESCRIPTOR)
  46. desc_p->txrx_status &= ~(DESC_TXSTS_TXINT | DESC_TXSTS_TXLAST |
  47. DESC_TXSTS_TXFIRST | DESC_TXSTS_TXCRCDIS | \
  48. DESC_TXSTS_TXCHECKINSCTRL | \
  49. DESC_TXSTS_TXRINGEND | DESC_TXSTS_TXPADDIS);
  50. desc_p->txrx_status |= DESC_TXSTS_TXCHAIN;
  51. desc_p->dmamac_cntl = 0;
  52. desc_p->txrx_status &= ~(DESC_TXSTS_MSK | DESC_TXSTS_OWNBYDMA);
  53. #else
  54. desc_p->dmamac_cntl = DESC_TXCTRL_TXCHAIN;
  55. desc_p->txrx_status = 0;
  56. #endif
  57. }
  58. /* Correcting the last pointer of the chain */
  59. desc_p->dmamac_next = &desc_table_p[0];
  60. writel((ulong)&desc_table_p[0], &dma_p->txdesclistaddr);
  61. }
  62. static void rx_descs_init(struct eth_device *dev)
  63. {
  64. struct dw_eth_dev *priv = dev->priv;
  65. struct eth_dma_regs *dma_p = priv->dma_regs_p;
  66. struct dmamacdescr *desc_table_p = &priv->rx_mac_descrtable[0];
  67. char *rxbuffs = &priv->rxbuffs[0];
  68. struct dmamacdescr *desc_p;
  69. u32 idx;
  70. for (idx = 0; idx < CONFIG_RX_DESCR_NUM; idx++) {
  71. desc_p = &desc_table_p[idx];
  72. desc_p->dmamac_addr = &rxbuffs[idx * CONFIG_ETH_BUFSIZE];
  73. desc_p->dmamac_next = &desc_table_p[idx + 1];
  74. desc_p->dmamac_cntl =
  75. (MAC_MAX_FRAME_SZ & DESC_RXCTRL_SIZE1MASK) | \
  76. DESC_RXCTRL_RXCHAIN;
  77. desc_p->txrx_status = DESC_RXSTS_OWNBYDMA;
  78. }
  79. /* Correcting the last pointer of the chain */
  80. desc_p->dmamac_next = &desc_table_p[0];
  81. writel((ulong)&desc_table_p[0], &dma_p->rxdesclistaddr);
  82. }
  83. static void descs_init(struct eth_device *dev)
  84. {
  85. tx_descs_init(dev);
  86. rx_descs_init(dev);
  87. }
  88. static int mac_reset(struct eth_device *dev)
  89. {
  90. struct dw_eth_dev *priv = dev->priv;
  91. struct eth_mac_regs *mac_p = priv->mac_regs_p;
  92. struct eth_dma_regs *dma_p = priv->dma_regs_p;
  93. ulong start;
  94. int timeout = CONFIG_MACRESET_TIMEOUT;
  95. writel(DMAMAC_SRST, &dma_p->busmode);
  96. writel(MII_PORTSELECT, &mac_p->conf);
  97. start = get_timer(0);
  98. while (get_timer(start) < timeout) {
  99. if (!(readl(&dma_p->busmode) & DMAMAC_SRST))
  100. return 0;
  101. /* Try again after 10usec */
  102. udelay(10);
  103. };
  104. return -1;
  105. }
  106. static int dw_write_hwaddr(struct eth_device *dev)
  107. {
  108. struct dw_eth_dev *priv = dev->priv;
  109. struct eth_mac_regs *mac_p = priv->mac_regs_p;
  110. u32 macid_lo, macid_hi;
  111. u8 *mac_id = &dev->enetaddr[0];
  112. macid_lo = mac_id[0] + (mac_id[1] << 8) + \
  113. (mac_id[2] << 16) + (mac_id[3] << 24);
  114. macid_hi = mac_id[4] + (mac_id[5] << 8);
  115. writel(macid_hi, &mac_p->macaddr0hi);
  116. writel(macid_lo, &mac_p->macaddr0lo);
  117. return 0;
  118. }
  119. static int dw_eth_init(struct eth_device *dev, bd_t *bis)
  120. {
  121. struct dw_eth_dev *priv = dev->priv;
  122. struct eth_mac_regs *mac_p = priv->mac_regs_p;
  123. struct eth_dma_regs *dma_p = priv->dma_regs_p;
  124. u32 conf;
  125. if (priv->phy_configured != 1)
  126. configure_phy(dev);
  127. /* Reset ethernet hardware */
  128. if (mac_reset(dev) < 0)
  129. return -1;
  130. /* Resore the HW MAC address as it has been lost during MAC reset */
  131. dw_write_hwaddr(dev);
  132. writel(FIXEDBURST | PRIORXTX_41 | BURST_16,
  133. &dma_p->busmode);
  134. writel(FLUSHTXFIFO | readl(&dma_p->opmode), &dma_p->opmode);
  135. writel(STOREFORWARD | TXSECONDFRAME, &dma_p->opmode);
  136. conf = FRAMEBURSTENABLE | DISABLERXOWN;
  137. if (priv->speed != SPEED_1000M)
  138. conf |= MII_PORTSELECT;
  139. if (priv->duplex == FULL_DUPLEX)
  140. conf |= FULLDPLXMODE;
  141. writel(conf, &mac_p->conf);
  142. descs_init(dev);
  143. /*
  144. * Start/Enable xfer at dma as well as mac level
  145. */
  146. writel(readl(&dma_p->opmode) | RXSTART, &dma_p->opmode);
  147. writel(readl(&dma_p->opmode) | TXSTART, &dma_p->opmode);
  148. writel(readl(&mac_p->conf) | RXENABLE | TXENABLE, &mac_p->conf);
  149. return 0;
  150. }
  151. static int dw_eth_send(struct eth_device *dev, void *packet, int length)
  152. {
  153. struct dw_eth_dev *priv = dev->priv;
  154. struct eth_dma_regs *dma_p = priv->dma_regs_p;
  155. u32 desc_num = priv->tx_currdescnum;
  156. struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num];
  157. /* Check if the descriptor is owned by CPU */
  158. if (desc_p->txrx_status & DESC_TXSTS_OWNBYDMA) {
  159. printf("CPU not owner of tx frame\n");
  160. return -1;
  161. }
  162. memcpy((void *)desc_p->dmamac_addr, packet, length);
  163. #if defined(CONFIG_DW_ALTDESCRIPTOR)
  164. desc_p->txrx_status |= DESC_TXSTS_TXFIRST | DESC_TXSTS_TXLAST;
  165. desc_p->dmamac_cntl |= (length << DESC_TXCTRL_SIZE1SHFT) & \
  166. DESC_TXCTRL_SIZE1MASK;
  167. desc_p->txrx_status &= ~(DESC_TXSTS_MSK);
  168. desc_p->txrx_status |= DESC_TXSTS_OWNBYDMA;
  169. #else
  170. desc_p->dmamac_cntl |= ((length << DESC_TXCTRL_SIZE1SHFT) & \
  171. DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST | \
  172. DESC_TXCTRL_TXFIRST;
  173. desc_p->txrx_status = DESC_TXSTS_OWNBYDMA;
  174. #endif
  175. /* Test the wrap-around condition. */
  176. if (++desc_num >= CONFIG_TX_DESCR_NUM)
  177. desc_num = 0;
  178. priv->tx_currdescnum = desc_num;
  179. /* Start the transmission */
  180. writel(POLL_DATA, &dma_p->txpolldemand);
  181. return 0;
  182. }
  183. static int dw_eth_recv(struct eth_device *dev)
  184. {
  185. struct dw_eth_dev *priv = dev->priv;
  186. u32 desc_num = priv->rx_currdescnum;
  187. struct dmamacdescr *desc_p = &priv->rx_mac_descrtable[desc_num];
  188. u32 status = desc_p->txrx_status;
  189. int length = 0;
  190. /* Check if the owner is the CPU */
  191. if (!(status & DESC_RXSTS_OWNBYDMA)) {
  192. length = (status & DESC_RXSTS_FRMLENMSK) >> \
  193. DESC_RXSTS_FRMLENSHFT;
  194. NetReceive(desc_p->dmamac_addr, length);
  195. /*
  196. * Make the current descriptor valid again and go to
  197. * the next one
  198. */
  199. desc_p->txrx_status |= DESC_RXSTS_OWNBYDMA;
  200. /* Test the wrap-around condition. */
  201. if (++desc_num >= CONFIG_RX_DESCR_NUM)
  202. desc_num = 0;
  203. }
  204. priv->rx_currdescnum = desc_num;
  205. return length;
  206. }
  207. static void dw_eth_halt(struct eth_device *dev)
  208. {
  209. struct dw_eth_dev *priv = dev->priv;
  210. mac_reset(dev);
  211. priv->tx_currdescnum = priv->rx_currdescnum = 0;
  212. }
  213. static int eth_mdio_read(struct eth_device *dev, u8 addr, u8 reg, u16 *val)
  214. {
  215. struct dw_eth_dev *priv = dev->priv;
  216. struct eth_mac_regs *mac_p = priv->mac_regs_p;
  217. ulong start;
  218. u32 miiaddr;
  219. int timeout = CONFIG_MDIO_TIMEOUT;
  220. miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \
  221. ((reg << MIIREGSHIFT) & MII_REGMSK);
  222. writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
  223. start = get_timer(0);
  224. while (get_timer(start) < timeout) {
  225. if (!(readl(&mac_p->miiaddr) & MII_BUSY)) {
  226. *val = readl(&mac_p->miidata);
  227. return 0;
  228. }
  229. /* Try again after 10usec */
  230. udelay(10);
  231. };
  232. return -1;
  233. }
  234. static int eth_mdio_write(struct eth_device *dev, u8 addr, u8 reg, u16 val)
  235. {
  236. struct dw_eth_dev *priv = dev->priv;
  237. struct eth_mac_regs *mac_p = priv->mac_regs_p;
  238. ulong start;
  239. u32 miiaddr;
  240. int ret = -1, timeout = CONFIG_MDIO_TIMEOUT;
  241. u16 value;
  242. writel(val, &mac_p->miidata);
  243. miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \
  244. ((reg << MIIREGSHIFT) & MII_REGMSK) | MII_WRITE;
  245. writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
  246. start = get_timer(0);
  247. while (get_timer(start) < timeout) {
  248. if (!(readl(&mac_p->miiaddr) & MII_BUSY)) {
  249. ret = 0;
  250. break;
  251. }
  252. /* Try again after 10usec */
  253. udelay(10);
  254. };
  255. /* Needed as a fix for ST-Phy */
  256. eth_mdio_read(dev, addr, reg, &value);
  257. return ret;
  258. }
  259. #if defined(CONFIG_DW_SEARCH_PHY)
  260. static int find_phy(struct eth_device *dev)
  261. {
  262. int phy_addr = 0;
  263. u16 ctrl, oldctrl;
  264. do {
  265. eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
  266. oldctrl = ctrl & BMCR_ANENABLE;
  267. ctrl ^= BMCR_ANENABLE;
  268. eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl);
  269. eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
  270. ctrl &= BMCR_ANENABLE;
  271. if (ctrl == oldctrl) {
  272. phy_addr++;
  273. } else {
  274. ctrl ^= BMCR_ANENABLE;
  275. eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl);
  276. return phy_addr;
  277. }
  278. } while (phy_addr < 32);
  279. return -1;
  280. }
  281. #endif
  282. static int dw_reset_phy(struct eth_device *dev)
  283. {
  284. struct dw_eth_dev *priv = dev->priv;
  285. u16 ctrl;
  286. ulong start;
  287. int timeout = CONFIG_PHYRESET_TIMEOUT;
  288. u32 phy_addr = priv->address;
  289. eth_mdio_write(dev, phy_addr, MII_BMCR, BMCR_RESET);
  290. start = get_timer(0);
  291. while (get_timer(start) < timeout) {
  292. eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
  293. if (!(ctrl & BMCR_RESET))
  294. break;
  295. /* Try again after 10usec */
  296. udelay(10);
  297. };
  298. if (get_timer(start) >= CONFIG_PHYRESET_TIMEOUT)
  299. return -1;
  300. #ifdef CONFIG_PHY_RESET_DELAY
  301. udelay(CONFIG_PHY_RESET_DELAY);
  302. #endif
  303. return 0;
  304. }
  305. static int configure_phy(struct eth_device *dev)
  306. {
  307. struct dw_eth_dev *priv = dev->priv;
  308. int phy_addr;
  309. u16 bmcr;
  310. #if defined(CONFIG_DW_AUTONEG)
  311. u16 bmsr;
  312. u32 timeout;
  313. ulong start;
  314. u16 anlpar, btsr;
  315. #else
  316. u16 ctrl;
  317. #endif
  318. #if defined(CONFIG_DW_SEARCH_PHY)
  319. phy_addr = find_phy(dev);
  320. if (phy_addr >= 0)
  321. priv->address = phy_addr;
  322. else
  323. return -1;
  324. #else
  325. phy_addr = priv->address;
  326. #endif
  327. if (dw_reset_phy(dev) < 0)
  328. return -1;
  329. #if defined(CONFIG_DW_AUTONEG)
  330. /* Set Auto-Neg Advertisement capabilities to 10/100 half/full */
  331. eth_mdio_write(dev, phy_addr, MII_ADVERTISE, 0x1E1);
  332. bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
  333. #else
  334. bmcr = BMCR_SPEED100 | BMCR_FULLDPLX;
  335. #if defined(CONFIG_DW_SPEED10M)
  336. bmcr &= ~BMCR_SPEED100;
  337. #endif
  338. #if defined(CONFIG_DW_DUPLEXHALF)
  339. bmcr &= ~BMCR_FULLDPLX;
  340. #endif
  341. #endif
  342. if (eth_mdio_write(dev, phy_addr, MII_BMCR, bmcr) < 0)
  343. return -1;
  344. /* Read the phy status register and populate priv structure */
  345. #if defined(CONFIG_DW_AUTONEG)
  346. timeout = CONFIG_AUTONEG_TIMEOUT;
  347. start = get_timer(0);
  348. while (get_timer(start) < timeout) {
  349. eth_mdio_read(dev, phy_addr, MII_BMSR, &bmsr);
  350. if (bmsr & BMSR_ANEGCOMPLETE)
  351. break;
  352. /* Try again after 10usec */
  353. udelay(10);
  354. };
  355. eth_mdio_read(dev, phy_addr, MII_LPA, &anlpar);
  356. eth_mdio_read(dev, phy_addr, MII_STAT1000, &btsr);
  357. if (bmsr & BMSR_ANEGCOMPLETE) {
  358. if (btsr & PHY_1000BTSR_1000FD) {
  359. priv->speed = SPEED_1000M;
  360. bmcr |= BMCR_SPEED1000;
  361. priv->duplex = FULL_DUPLEX;
  362. bmcr |= BMCR_FULLDPLX;
  363. } else if (btsr & PHY_1000BTSR_1000HD) {
  364. priv->speed = SPEED_1000M;
  365. bmcr |= BMCR_SPEED1000;
  366. priv->duplex = HALF_DUPLEX;
  367. bmcr &= ~BMCR_FULLDPLX;
  368. } else if (anlpar & LPA_100FULL) {
  369. priv->speed = SPEED_100M;
  370. bmcr |= BMCR_SPEED100;
  371. priv->duplex = FULL_DUPLEX;
  372. bmcr |= BMCR_FULLDPLX;
  373. } else if (anlpar & LPA_100HALF) {
  374. priv->speed = SPEED_100M;
  375. bmcr |= BMCR_SPEED100;
  376. priv->duplex = HALF_DUPLEX;
  377. bmcr &= ~BMCR_FULLDPLX;
  378. } else if (anlpar & LPA_10FULL) {
  379. priv->speed = SPEED_10M;
  380. bmcr &= ~BMCR_SPEED100;
  381. priv->duplex = FULL_DUPLEX;
  382. bmcr |= BMCR_FULLDPLX;
  383. } else {
  384. priv->speed = SPEED_10M;
  385. bmcr &= ~BMCR_SPEED100;
  386. priv->duplex = HALF_DUPLEX;
  387. bmcr &= ~BMCR_FULLDPLX;
  388. }
  389. if (eth_mdio_write(dev, phy_addr, MII_BMCR, bmcr) < 0)
  390. return -1;
  391. } else
  392. return -1;
  393. #else
  394. if (eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl) < 0)
  395. return -1;
  396. if (ctrl & BMCR_FULLDPLX)
  397. priv->duplex = FULL_DUPLEX;
  398. else
  399. priv->duplex = HALF_DUPLEX;
  400. if (ctrl & BMCR_SPEED1000)
  401. priv->speed = SPEED_1000M;
  402. else if (ctrl & BMCR_SPEED100)
  403. priv->speed = SPEED_100M;
  404. else
  405. priv->speed = SPEED_10M;
  406. #endif
  407. priv->phy_configured = 1;
  408. return 0;
  409. }
  410. #if defined(CONFIG_MII)
  411. static int dw_mii_read(const char *devname, u8 addr, u8 reg, u16 *val)
  412. {
  413. struct eth_device *dev;
  414. dev = eth_get_dev_by_name(devname);
  415. if (dev)
  416. eth_mdio_read(dev, addr, reg, val);
  417. return 0;
  418. }
  419. static int dw_mii_write(const char *devname, u8 addr, u8 reg, u16 val)
  420. {
  421. struct eth_device *dev;
  422. dev = eth_get_dev_by_name(devname);
  423. if (dev)
  424. eth_mdio_write(dev, addr, reg, val);
  425. return 0;
  426. }
  427. #endif
  428. int designware_initialize(u32 id, ulong base_addr, u32 phy_addr)
  429. {
  430. struct eth_device *dev;
  431. struct dw_eth_dev *priv;
  432. dev = (struct eth_device *) malloc(sizeof(struct eth_device));
  433. if (!dev)
  434. return -ENOMEM;
  435. /*
  436. * Since the priv structure contains the descriptors which need a strict
  437. * buswidth alignment, memalign is used to allocate memory
  438. */
  439. priv = (struct dw_eth_dev *) memalign(16, sizeof(struct dw_eth_dev));
  440. if (!priv) {
  441. free(dev);
  442. return -ENOMEM;
  443. }
  444. memset(dev, 0, sizeof(struct eth_device));
  445. memset(priv, 0, sizeof(struct dw_eth_dev));
  446. sprintf(dev->name, "mii%d", id);
  447. dev->iobase = (int)base_addr;
  448. dev->priv = priv;
  449. eth_getenv_enetaddr_by_index("eth", id, &dev->enetaddr[0]);
  450. priv->dev = dev;
  451. priv->mac_regs_p = (struct eth_mac_regs *)base_addr;
  452. priv->dma_regs_p = (struct eth_dma_regs *)(base_addr +
  453. DW_DMA_BASE_OFFSET);
  454. priv->address = phy_addr;
  455. priv->phy_configured = 0;
  456. if (mac_reset(dev) < 0)
  457. return -1;
  458. configure_phy(dev);
  459. dev->init = dw_eth_init;
  460. dev->send = dw_eth_send;
  461. dev->recv = dw_eth_recv;
  462. dev->halt = dw_eth_halt;
  463. dev->write_hwaddr = dw_write_hwaddr;
  464. eth_register(dev);
  465. #if defined(CONFIG_MII)
  466. miiphy_register(dev->name, dw_mii_read, dw_mii_write);
  467. #endif
  468. return 1;
  469. }