fdt_support.h 4.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134
  1. /*
  2. * (C) Copyright 2007
  3. * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
  4. *
  5. * SPDX-License-Identifier: GPL-2.0+
  6. */
  7. #ifndef __FDT_SUPPORT_H
  8. #define __FDT_SUPPORT_H
  9. #ifdef CONFIG_OF_LIBFDT
  10. #include <libfdt.h>
  11. u32 fdt_getprop_u32_default_node(const void *fdt, int off, int cell,
  12. const char *prop, const u32 dflt);
  13. u32 fdt_getprop_u32_default(const void *fdt, const char *path,
  14. const char *prop, const u32 dflt);
  15. int fdt_chosen(void *fdt);
  16. int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end);
  17. void do_fixup_by_path(void *fdt, const char *path, const char *prop,
  18. const void *val, int len, int create);
  19. void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop,
  20. u32 val, int create);
  21. static inline void do_fixup_by_path_string(void *fdt, const char *path,
  22. const char *prop, const char *status)
  23. {
  24. do_fixup_by_path(fdt, path, prop, status, strlen(status) + 1, 1);
  25. }
  26. void do_fixup_by_prop(void *fdt,
  27. const char *pname, const void *pval, int plen,
  28. const char *prop, const void *val, int len,
  29. int create);
  30. void do_fixup_by_prop_u32(void *fdt,
  31. const char *pname, const void *pval, int plen,
  32. const char *prop, u32 val, int create);
  33. void do_fixup_by_compat(void *fdt, const char *compat,
  34. const char *prop, const void *val, int len, int create);
  35. void do_fixup_by_compat_u32(void *fdt, const char *compat,
  36. const char *prop, u32 val, int create);
  37. int fdt_fixup_memory(void *blob, u64 start, u64 size);
  38. int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks);
  39. void fdt_fixup_ethernet(void *fdt);
  40. int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
  41. const void *val, int len, int create);
  42. void fdt_fixup_qe_firmware(void *fdt);
  43. #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
  44. void fdt_fixup_dr_usb(void *blob, bd_t *bd);
  45. #else
  46. static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
  47. #endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
  48. #if defined(CONFIG_SYS_FSL_SEC_COMPAT)
  49. void fdt_fixup_crypto_node(void *blob, int sec_rev);
  50. #else
  51. static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {}
  52. #endif
  53. #ifdef CONFIG_PCI
  54. #include <pci.h>
  55. int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose);
  56. #endif
  57. void ft_board_setup(void *blob, bd_t *bd);
  58. /*
  59. * The keystone2 SOC requires all 32 bit aliased addresses to be converted
  60. * to their 36 physical format. This has to happen after all fdt nodes
  61. * are added or modified by the image_setup_libfdt(). The ft_board_setup_ex()
  62. * called at the end of the image_setup_libfdt() is to do that convertion.
  63. */
  64. void ft_board_setup_ex(void *blob, bd_t *bd);
  65. void ft_cpu_setup(void *blob, bd_t *bd);
  66. void ft_pci_setup(void *blob, bd_t *bd);
  67. void set_working_fdt_addr(void *addr);
  68. int fdt_resize(void *blob);
  69. int fdt_increase_size(void *fdt, int add_len);
  70. int fdt_fixup_nor_flash_size(void *blob);
  71. void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size);
  72. void fdt_del_node_and_alias(void *blob, const char *alias);
  73. u64 fdt_translate_address(void *blob, int node_offset, const __be32 *in_addr);
  74. int fdt_node_offset_by_compat_reg(void *blob, const char *compat,
  75. phys_addr_t compat_off);
  76. int fdt_alloc_phandle(void *blob);
  77. int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle);
  78. unsigned int fdt_create_phandle(void *fdt, int nodeoffset);
  79. int fdt_add_edid(void *blob, const char *compat, unsigned char *buf);
  80. int fdt_verify_alias_address(void *fdt, int anode, const char *alias,
  81. u64 addr);
  82. u64 fdt_get_base_address(void *fdt, int node);
  83. int fdt_read_range(void *fdt, int node, int n, uint64_t *child_addr,
  84. uint64_t *addr, uint64_t *len);
  85. enum fdt_status {
  86. FDT_STATUS_OKAY,
  87. FDT_STATUS_DISABLED,
  88. FDT_STATUS_FAIL,
  89. FDT_STATUS_FAIL_ERROR_CODE,
  90. };
  91. int fdt_set_node_status(void *fdt, int nodeoffset,
  92. enum fdt_status status, unsigned int error_code);
  93. static inline int fdt_status_okay(void *fdt, int nodeoffset)
  94. {
  95. return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_OKAY, 0);
  96. }
  97. static inline int fdt_status_disabled(void *fdt, int nodeoffset)
  98. {
  99. return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_DISABLED, 0);
  100. }
  101. int fdt_set_status_by_alias(void *fdt, const char* alias,
  102. enum fdt_status status, unsigned int error_code);
  103. static inline int fdt_status_okay_by_alias(void *fdt, const char* alias)
  104. {
  105. return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_OKAY, 0);
  106. }
  107. static inline int fdt_status_disabled_by_alias(void *fdt, const char* alias)
  108. {
  109. return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_DISABLED, 0);
  110. }
  111. #endif /* ifdef CONFIG_OF_LIBFDT */
  112. #ifdef USE_HOSTCC
  113. int fdtdec_get_int(const void *blob, int node, const char *prop_name,
  114. int default_val);
  115. #endif
  116. #endif /* ifndef __FDT_SUPPORT_H */