init.c 5.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241
  1. /*
  2. * Copyright 2011 Freescale Semiconductor, Inc.
  3. *
  4. * This program is free software; you can redistribute it and/or
  5. * modify it under the terms of the GNU General Public License as
  6. * published by the Free Software Foundation; either version 2 of
  7. * the License, or (at your option) any later version.
  8. *
  9. * This program is distributed in the hope that it will be useful,
  10. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  12. * GNU General Public License for more details.
  13. *
  14. * You should have received a copy of the GNU General Public License
  15. * along with this program; if not, write to the Free Software
  16. * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  17. * MA 02111-1307 USA
  18. */
  19. #include <common.h>
  20. #include <asm/io.h>
  21. #include <asm/fsl_serdes.h>
  22. #include "fm.h"
  23. struct fm_eth_info fm_info[] = {
  24. #if (CONFIG_SYS_NUM_FM1_DTSEC >= 1)
  25. FM_DTSEC_INFO_INITIALIZER(1, 1),
  26. #endif
  27. #if (CONFIG_SYS_NUM_FM1_DTSEC >= 2)
  28. FM_DTSEC_INFO_INITIALIZER(1, 2),
  29. #endif
  30. #if (CONFIG_SYS_NUM_FM1_DTSEC >= 3)
  31. FM_DTSEC_INFO_INITIALIZER(1, 3),
  32. #endif
  33. #if (CONFIG_SYS_NUM_FM1_DTSEC >= 4)
  34. FM_DTSEC_INFO_INITIALIZER(1, 4),
  35. #endif
  36. #if (CONFIG_SYS_NUM_FM1_DTSEC >= 5)
  37. FM_DTSEC_INFO_INITIALIZER(1, 5),
  38. #endif
  39. #if (CONFIG_SYS_NUM_FM2_DTSEC >= 1)
  40. FM_DTSEC_INFO_INITIALIZER(2, 1),
  41. #endif
  42. #if (CONFIG_SYS_NUM_FM2_DTSEC >= 2)
  43. FM_DTSEC_INFO_INITIALIZER(2, 2),
  44. #endif
  45. #if (CONFIG_SYS_NUM_FM2_DTSEC >= 3)
  46. FM_DTSEC_INFO_INITIALIZER(2, 3),
  47. #endif
  48. #if (CONFIG_SYS_NUM_FM2_DTSEC >= 4)
  49. FM_DTSEC_INFO_INITIALIZER(2, 4),
  50. #endif
  51. #if (CONFIG_SYS_NUM_FM2_DTSEC >= 5)
  52. FM_DTSEC_INFO_INITIALIZER(2, 5),
  53. #endif
  54. #if (CONFIG_SYS_NUM_FM1_10GEC >= 1)
  55. FM_TGEC_INFO_INITIALIZER(1, 1),
  56. #endif
  57. #if (CONFIG_SYS_NUM_FM2_10GEC >= 1)
  58. FM_TGEC_INFO_INITIALIZER(2, 1),
  59. #endif
  60. };
  61. int fm_standard_init(bd_t *bis)
  62. {
  63. int i;
  64. struct ccsr_fman *reg;
  65. reg = (void *)CONFIG_SYS_FSL_FM1_ADDR;
  66. if (fm_init_common(0, reg))
  67. return 0;
  68. for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
  69. if ((fm_info[i].enabled) && (fm_info[i].index == 1))
  70. fm_eth_initialize(reg, &fm_info[i]);
  71. }
  72. #if (CONFIG_SYS_NUM_FMAN == 2)
  73. reg = (void *)CONFIG_SYS_FSL_FM2_ADDR;
  74. if (fm_init_common(1, reg))
  75. return 0;
  76. for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
  77. if ((fm_info[i].enabled) && (fm_info[i].index == 2))
  78. fm_eth_initialize(reg, &fm_info[i]);
  79. }
  80. #endif
  81. return 1;
  82. }
  83. /* simple linear search to map from port to array index */
  84. static int fm_port_to_index(enum fm_port port)
  85. {
  86. int i;
  87. for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
  88. if (fm_info[i].port == port)
  89. return i;
  90. }
  91. return -1;
  92. }
  93. /*
  94. * Determine if an interface is actually active based on HW config
  95. * we expect fman_port_enet_if() to report PHY_INTERFACE_MODE_NONE if
  96. * the interface is not active based on HW cfg of the SoC
  97. */
  98. void fman_enet_init(void)
  99. {
  100. int i;
  101. for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
  102. phy_interface_t enet_if;
  103. enet_if = fman_port_enet_if(fm_info[i].port);
  104. if (enet_if != PHY_INTERFACE_MODE_NONE) {
  105. fm_info[i].enabled = 1;
  106. fm_info[i].enet_if = enet_if;
  107. } else {
  108. fm_info[i].enabled = 0;
  109. }
  110. }
  111. return ;
  112. }
  113. void fm_disable_port(enum fm_port port)
  114. {
  115. int i = fm_port_to_index(port);
  116. fm_info[i].enabled = 0;
  117. fman_disable_port(port);
  118. }
  119. void fm_info_set_mdio(enum fm_port port, struct mii_dev *bus)
  120. {
  121. int i = fm_port_to_index(port);
  122. if (i == -1)
  123. return;
  124. fm_info[i].bus = bus;
  125. }
  126. void fm_info_set_phy_address(enum fm_port port, int address)
  127. {
  128. int i = fm_port_to_index(port);
  129. if (i == -1)
  130. return;
  131. fm_info[i].phy_addr = address;
  132. }
  133. /*
  134. * Returns the PHY address for a given Fman port
  135. *
  136. * The port must be set via a prior call to fm_info_set_phy_address().
  137. * A negative error code is returned if the port is invalid.
  138. */
  139. int fm_info_get_phy_address(enum fm_port port)
  140. {
  141. int i = fm_port_to_index(port);
  142. if (i == -1)
  143. return -1;
  144. return fm_info[i].phy_addr;
  145. }
  146. /*
  147. * Returns the type of the data interface between the given MAC and its PHY.
  148. * This is typically determined by the RCW.
  149. */
  150. phy_interface_t fm_info_get_enet_if(enum fm_port port)
  151. {
  152. int i = fm_port_to_index(port);
  153. if (i == -1)
  154. return PHY_INTERFACE_MODE_NONE;
  155. if (fm_info[i].enabled)
  156. return fm_info[i].enet_if;
  157. return PHY_INTERFACE_MODE_NONE;
  158. }
  159. static void
  160. __def_board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
  161. enum fm_port port, int offset)
  162. {
  163. return ;
  164. }
  165. void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
  166. enum fm_port port, int offset)
  167. __attribute__((weak, alias("__def_board_ft_fman_fixup_port")));
  168. static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
  169. {
  170. int off, ph;
  171. phys_addr_t paddr = CONFIG_SYS_CCSRBAR_PHYS + info->compat_offset;
  172. u64 dtsec1_addr = (u64)CONFIG_SYS_CCSRBAR_PHYS +
  173. CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET;
  174. off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
  175. if (info->enabled) {
  176. fdt_fixup_phy_connection(blob, off, info->enet_if);
  177. board_ft_fman_fixup_port(blob, prop, paddr, info->port, off);
  178. return ;
  179. }
  180. /* board code might have caused offset to change */
  181. off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
  182. /* Don't disable FM1-DTSEC1 MAC as its used for MDIO */
  183. if (paddr != dtsec1_addr) {
  184. /* disable the mac node */
  185. fdt_setprop_string(blob, off, "status", "disabled");
  186. }
  187. /* disable the node point to the mac */
  188. ph = fdt_get_phandle(blob, off);
  189. do_fixup_by_prop(blob, "fsl,fman-mac", &ph, sizeof(ph),
  190. "status", "disabled", strlen("disabled") + 1, 1);
  191. }
  192. void fdt_fixup_fman_ethernet(void *blob)
  193. {
  194. int i;
  195. for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
  196. if (fm_info[i].type == FM_ETH_1G_E)
  197. ft_fixup_port(blob, &fm_info[i], "fsl,fman-1g-mac");
  198. else
  199. ft_fixup_port(blob, &fm_info[i], "fsl,fman-10g-mac");
  200. }
  201. }