common.h 30 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092
  1. /*
  2. * (C) Copyright 2000-2009
  3. * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  4. *
  5. * SPDX-License-Identifier: GPL-2.0+
  6. */
  7. #ifndef __COMMON_H_
  8. #define __COMMON_H_ 1
  9. #ifndef __ASSEMBLY__ /* put C only stuff in this section */
  10. typedef unsigned char uchar;
  11. typedef volatile unsigned long vu_long;
  12. typedef volatile unsigned short vu_short;
  13. typedef volatile unsigned char vu_char;
  14. #include <config.h>
  15. #include <asm-offsets.h>
  16. #include <linux/bitops.h>
  17. #include <linux/types.h>
  18. #include <linux/string.h>
  19. #include <linux/stringify.h>
  20. #include <asm/ptrace.h>
  21. #include <stdarg.h>
  22. #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
  23. #include <pci.h>
  24. #endif
  25. #if defined(CONFIG_8xx)
  26. #include <asm/8xx_immap.h>
  27. #if defined(CONFIG_MPC852) || defined(CONFIG_MPC852T) || \
  28. defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \
  29. defined(CONFIG_MPC859DSL) || \
  30. defined(CONFIG_MPC866) || defined(CONFIG_MPC866T) || \
  31. defined(CONFIG_MPC866P)
  32. # define CONFIG_MPC866_FAMILY 1
  33. #elif defined(CONFIG_MPC870) \
  34. || defined(CONFIG_MPC875) \
  35. || defined(CONFIG_MPC880) \
  36. || defined(CONFIG_MPC885)
  37. # define CONFIG_MPC885_FAMILY 1
  38. #endif
  39. #if defined(CONFIG_MPC860) \
  40. || defined(CONFIG_MPC860T) \
  41. || defined(CONFIG_MPC866_FAMILY) \
  42. || defined(CONFIG_MPC885_FAMILY)
  43. # define CONFIG_MPC86x 1
  44. #endif
  45. #elif defined(CONFIG_5xx)
  46. #include <asm/5xx_immap.h>
  47. #elif defined(CONFIG_MPC5xxx)
  48. #include <mpc5xxx.h>
  49. #elif defined(CONFIG_MPC512X)
  50. #include <asm/immap_512x.h>
  51. #elif defined(CONFIG_MPC8260)
  52. #if defined(CONFIG_MPC8247) \
  53. || defined(CONFIG_MPC8248) \
  54. || defined(CONFIG_MPC8271) \
  55. || defined(CONFIG_MPC8272)
  56. #define CONFIG_MPC8272_FAMILY 1
  57. #endif
  58. #include <asm/immap_8260.h>
  59. #endif
  60. #ifdef CONFIG_MPC86xx
  61. #include <mpc86xx.h>
  62. #include <asm/immap_86xx.h>
  63. #endif
  64. #ifdef CONFIG_MPC85xx
  65. #include <mpc85xx.h>
  66. #include <asm/immap_85xx.h>
  67. #endif
  68. #ifdef CONFIG_MPC83xx
  69. #include <mpc83xx.h>
  70. #include <asm/immap_83xx.h>
  71. #endif
  72. #ifdef CONFIG_4xx
  73. #include <asm/ppc4xx.h>
  74. #endif
  75. #ifdef CONFIG_HYMOD
  76. #include <board/hymod/hymod.h>
  77. #endif
  78. #ifdef CONFIG_ARM
  79. #define asmlinkage /* nothing */
  80. #endif
  81. #ifdef CONFIG_BLACKFIN
  82. #include <asm/blackfin.h>
  83. #endif
  84. #ifdef CONFIG_SOC_DA8XX
  85. #include <asm/arch/hardware.h>
  86. #endif
  87. #include <part.h>
  88. #include <flash.h>
  89. #include <image.h>
  90. #ifdef __LP64__
  91. #define CONFIG_SYS_SUPPORT_64BIT_DATA
  92. #endif
  93. #ifdef DEBUG
  94. #define _DEBUG 1
  95. #else
  96. #define _DEBUG 0
  97. #endif
  98. /*
  99. * Output a debug text when condition "cond" is met. The "cond" should be
  100. * computed by a preprocessor in the best case, allowing for the best
  101. * optimization.
  102. */
  103. #define debug_cond(cond, fmt, args...) \
  104. do { \
  105. if (cond) \
  106. printf(fmt, ##args); \
  107. } while (0)
  108. #define debug(fmt, args...) \
  109. debug_cond(_DEBUG, fmt, ##args)
  110. /*
  111. * An assertion is run-time check done in debug mode only. If DEBUG is not
  112. * defined then it is skipped. If DEBUG is defined and the assertion fails,
  113. * then it calls panic*( which may or may not reset/halt U-Boot (see
  114. * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
  115. * before release, and after release it is hoped that they don't matter. But
  116. * in any case these failing assertions cannot be fixed with a reset (which
  117. * may just do the same assertion again).
  118. */
  119. void __assert_fail(const char *assertion, const char *file, unsigned line,
  120. const char *function);
  121. #define assert(x) \
  122. ({ if (!(x) && _DEBUG) \
  123. __assert_fail(#x, __FILE__, __LINE__, __func__); })
  124. #define error(fmt, args...) do { \
  125. printf("ERROR: " fmt "\nat %s:%d/%s()\n", \
  126. ##args, __FILE__, __LINE__, __func__); \
  127. } while (0)
  128. #ifndef BUG
  129. #define BUG() do { \
  130. printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
  131. panic("BUG!"); \
  132. } while (0)
  133. #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
  134. #endif /* BUG */
  135. /* Force a compilation error if condition is true */
  136. #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
  137. typedef void (interrupt_handler_t)(void *);
  138. #include <asm/u-boot.h> /* boot information for Linux kernel */
  139. #include <asm/global_data.h> /* global data used for startup functions */
  140. /*
  141. * enable common handling for all TQM8xxL/M boards:
  142. * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
  143. * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
  144. * and for the TQM885D board
  145. */
  146. #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
  147. defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
  148. defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
  149. # ifndef CONFIG_TQM8xxM
  150. # define CONFIG_TQM8xxM
  151. # endif
  152. #endif
  153. #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
  154. defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
  155. defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
  156. defined(CONFIG_TQM885D)
  157. # ifndef CONFIG_TQM8xxL
  158. # define CONFIG_TQM8xxL
  159. # endif
  160. #endif
  161. /*
  162. * General Purpose Utilities
  163. */
  164. #define min(X, Y) \
  165. ({ typeof(X) __x = (X); \
  166. typeof(Y) __y = (Y); \
  167. (__x < __y) ? __x : __y; })
  168. #define max(X, Y) \
  169. ({ typeof(X) __x = (X); \
  170. typeof(Y) __y = (Y); \
  171. (__x > __y) ? __x : __y; })
  172. #define MIN(x, y) min(x, y)
  173. #define MAX(x, y) max(x, y)
  174. #define min3(X, Y, Z) \
  175. ({ typeof(X) __x = (X); \
  176. typeof(Y) __y = (Y); \
  177. typeof(Z) __z = (Z); \
  178. __x < __y ? (__x < __z ? __x : __z) : \
  179. (__y < __z ? __y : __z); })
  180. #define max3(X, Y, Z) \
  181. ({ typeof(X) __x = (X); \
  182. typeof(Y) __y = (Y); \
  183. typeof(Z) __z = (Z); \
  184. __x > __y ? (__x > __z ? __x : __z) : \
  185. (__y > __z ? __y : __z); })
  186. #define MIN3(x, y, z) min3(x, y, z)
  187. #define MAX3(x, y, z) max3(x, y, z)
  188. /*
  189. * Return the absolute value of a number.
  190. *
  191. * This handles unsigned and signed longs, ints, shorts and chars. For all
  192. * input types abs() returns a signed long.
  193. *
  194. * For 64-bit types, use abs64()
  195. */
  196. #define abs(x) ({ \
  197. long ret; \
  198. if (sizeof(x) == sizeof(long)) { \
  199. long __x = (x); \
  200. ret = (__x < 0) ? -__x : __x; \
  201. } else { \
  202. int __x = (x); \
  203. ret = (__x < 0) ? -__x : __x; \
  204. } \
  205. ret; \
  206. })
  207. #define abs64(x) ({ \
  208. s64 __x = (x); \
  209. (__x < 0) ? -__x : __x; \
  210. })
  211. #if defined(CONFIG_ENV_IS_EMBEDDED)
  212. #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
  213. #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
  214. (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
  215. defined(CONFIG_ENV_IS_IN_NVRAM)
  216. #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
  217. #else
  218. #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
  219. #endif
  220. /**
  221. * container_of - cast a member of a structure out to the containing structure
  222. * @ptr: the pointer to the member.
  223. * @type: the type of the container struct this is embedded in.
  224. * @member: the name of the member within the struct.
  225. *
  226. */
  227. #define container_of(ptr, type, member) ({ \
  228. const typeof( ((type *)0)->member ) *__mptr = (ptr); \
  229. (type *)( (char *)__mptr - offsetof(type,member) );})
  230. /*
  231. * Function Prototypes
  232. */
  233. void hang (void) __attribute__ ((noreturn));
  234. int timer_init(void);
  235. int cpu_init(void);
  236. /* */
  237. phys_size_t initdram (int);
  238. int display_options (void);
  239. void print_size(unsigned long long, const char *);
  240. int print_buffer(ulong addr, const void *data, uint width, uint count,
  241. uint linelen);
  242. /* common/main.c */
  243. void main_loop (void);
  244. int run_command(const char *cmd, int flag);
  245. /**
  246. * Run a list of commands separated by ; or even \0
  247. *
  248. * Note that if 'len' is not -1, then the command does not need to be nul
  249. * terminated, Memory will be allocated for the command in that case.
  250. *
  251. * @param cmd List of commands to run, each separated bu semicolon
  252. * @param len Length of commands excluding terminator if known (-1 if not)
  253. * @param flag Execution flags (CMD_FLAG_...)
  254. * @return 0 on success, or != 0 on error.
  255. */
  256. int run_command_list(const char *cmd, int len, int flag);
  257. int readline (const char *const prompt);
  258. int readline_into_buffer(const char *const prompt, char *buffer,
  259. int timeout);
  260. int parse_line (char *, char *[]);
  261. void init_cmd_timeout(void);
  262. void reset_cmd_timeout(void);
  263. extern char console_buffer[];
  264. /* arch/$(ARCH)/lib/board.c */
  265. void board_init_f(ulong);
  266. void board_init_r (gd_t *, ulong) __attribute__ ((noreturn));
  267. int checkboard (void);
  268. int checkflash (void);
  269. int checkdram (void);
  270. int last_stage_init(void);
  271. extern ulong monitor_flash_len;
  272. int mac_read_from_eeprom(void);
  273. extern u8 __dtb_dt_begin[]; /* embedded device tree blob */
  274. int set_cpu_clk_info(void);
  275. #if defined(CONFIG_DISPLAY_CPUINFO)
  276. int print_cpuinfo(void);
  277. #else
  278. static inline int print_cpuinfo(void)
  279. {
  280. return 0;
  281. }
  282. #endif
  283. int update_flash_size(int flash_size);
  284. int arch_early_init_r(void);
  285. /**
  286. * Show the DRAM size in a board-specific way
  287. *
  288. * This is used by boards to display DRAM information in their own way.
  289. *
  290. * @param size Size of DRAM (which should be displayed along with other info)
  291. */
  292. void board_show_dram(ulong size);
  293. /**
  294. * arch_fixup_memory_node() - Write arch-specific memory information to fdt
  295. *
  296. * Defined in arch/$(ARCH)/lib/bootm.c
  297. *
  298. * @blob: FDT blob to write to
  299. * @return 0 if ok, or -ve FDT_ERR_... on failure
  300. */
  301. int arch_fixup_memory_node(void *blob);
  302. /* common/flash.c */
  303. void flash_perror (int);
  304. /* common/cmd_source.c */
  305. int source (ulong addr, const char *fit_uname);
  306. extern ulong load_addr; /* Default Load Address */
  307. extern ulong save_addr; /* Default Save Address */
  308. extern ulong save_size; /* Default Save Size */
  309. /* common/cmd_doc.c */
  310. void doc_probe(unsigned long physadr);
  311. /* common/cmd_net.c */
  312. int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
  313. /* common/cmd_fat.c */
  314. int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
  315. /* common/cmd_ext2.c */
  316. int do_ext2load(cmd_tbl_t *, int, int, char * const []);
  317. /* common/cmd_nvedit.c */
  318. int env_init (void);
  319. void env_relocate (void);
  320. int envmatch (uchar *, int);
  321. /* Avoid unfortunate conflict with libc's getenv() */
  322. #ifdef CONFIG_SANDBOX
  323. #define getenv uboot_getenv
  324. #endif
  325. char *getenv (const char *);
  326. int getenv_f (const char *name, char *buf, unsigned len);
  327. ulong getenv_ulong(const char *name, int base, ulong default_val);
  328. /**
  329. * getenv_hex() - Return an environment variable as a hex value
  330. *
  331. * Decode an environment as a hex number (it may or may not have a 0x
  332. * prefix). If the environment variable cannot be found, or does not start
  333. * with hex digits, the default value is returned.
  334. *
  335. * @varname: Variable to decode
  336. * @default_val: Value to return on error
  337. */
  338. ulong getenv_hex(const char *varname, ulong default_val);
  339. /*
  340. * Read an environment variable as a boolean
  341. * Return -1 if variable does not exist (default to true)
  342. */
  343. int getenv_yesno(const char *var);
  344. int saveenv (void);
  345. int setenv (const char *, const char *);
  346. int setenv_ulong(const char *varname, ulong value);
  347. int setenv_hex(const char *varname, ulong value);
  348. /**
  349. * setenv_addr - Set an environment variable to an address in hex
  350. *
  351. * @varname: Environment variable to set
  352. * @addr: Value to set it to
  353. * @return 0 if ok, 1 on error
  354. */
  355. static inline int setenv_addr(const char *varname, const void *addr)
  356. {
  357. return setenv_hex(varname, (ulong)addr);
  358. }
  359. #ifdef CONFIG_ARM
  360. # include <asm/mach-types.h>
  361. # include <asm/setup.h>
  362. # include <asm/u-boot-arm.h> /* ARM version to be fixed! */
  363. #endif /* CONFIG_ARM */
  364. #ifdef CONFIG_X86 /* x86 version to be fixed! */
  365. # include <asm/u-boot-x86.h>
  366. #endif /* CONFIG_X86 */
  367. #ifdef CONFIG_SANDBOX
  368. # include <asm/u-boot-sandbox.h> /* TODO(sjg) what needs to be fixed? */
  369. #endif
  370. #ifdef CONFIG_NDS32
  371. # include <asm/mach-types.h>
  372. # include <asm/setup.h>
  373. # include <asm/u-boot-nds32.h>
  374. #endif /* CONFIG_NDS32 */
  375. #ifdef CONFIG_MIPS
  376. # include <asm/u-boot-mips.h>
  377. #endif /* CONFIG_MIPS */
  378. #ifdef CONFIG_ARC
  379. # include <asm/u-boot-arc.h>
  380. #endif /* CONFIG_ARC */
  381. #ifdef CONFIG_AUTO_COMPLETE
  382. int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf);
  383. #endif
  384. int get_env_id (void);
  385. void pci_init (void);
  386. void pci_init_board(void);
  387. void pciinfo (int, int);
  388. #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
  389. int pci_pre_init (struct pci_controller *);
  390. int is_pci_host (struct pci_controller *);
  391. #endif
  392. #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
  393. # if defined(CONFIG_SYS_PCI_TARGET_INIT)
  394. void pci_target_init (struct pci_controller *);
  395. # endif
  396. # if defined(CONFIG_SYS_PCI_MASTER_INIT)
  397. void pci_master_init (struct pci_controller *);
  398. # endif
  399. #if defined(CONFIG_440SPE) || \
  400. defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
  401. defined(CONFIG_405EX)
  402. void pcie_setup_hoses(int busno);
  403. #endif
  404. #endif
  405. int misc_init_f (void);
  406. int misc_init_r (void);
  407. /* common/exports.c */
  408. void jumptable_init(void);
  409. /* common/kallsysm.c */
  410. const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
  411. /* api/api.c */
  412. void api_init (void);
  413. /* common/memsize.c */
  414. long get_ram_size (long *, long);
  415. phys_size_t get_effective_memsize(void);
  416. /* $(BOARD)/$(BOARD).c */
  417. void reset_phy (void);
  418. void fdc_hw_init (void);
  419. /* $(BOARD)/eeprom.c */
  420. void eeprom_init (void);
  421. #ifndef CONFIG_SPI
  422. int eeprom_probe (unsigned dev_addr, unsigned offset);
  423. #endif
  424. int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
  425. int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
  426. #ifdef CONFIG_LWMON
  427. extern uchar pic_read (uchar reg);
  428. extern void pic_write (uchar reg, uchar val);
  429. #endif
  430. /*
  431. * Set this up regardless of board
  432. * type, to prevent errors.
  433. */
  434. #if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR)
  435. # define CONFIG_SYS_DEF_EEPROM_ADDR 0
  436. #else
  437. #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
  438. # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
  439. #endif
  440. #endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */
  441. #if defined(CONFIG_SPI)
  442. extern void spi_init_f (void);
  443. extern void spi_init_r (void);
  444. extern ssize_t spi_read (uchar *, int, uchar *, int);
  445. extern ssize_t spi_write (uchar *, int, uchar *, int);
  446. #endif
  447. #ifdef CONFIG_RPXCLASSIC
  448. void rpxclassic_init (void);
  449. #endif
  450. void rpxlite_init (void);
  451. #ifdef CONFIG_MBX
  452. /* $(BOARD)/mbx8xx.c */
  453. void mbx_init (void);
  454. void board_serial_init (void);
  455. void board_ether_init (void);
  456. #endif
  457. #ifdef CONFIG_HERMES
  458. /* $(BOARD)/hermes.c */
  459. void hermes_start_lxt980 (int speed);
  460. #endif
  461. #ifdef CONFIG_EVB64260
  462. void evb64260_init(void);
  463. void debug_led(int, int);
  464. void display_mem_map(void);
  465. void perform_soft_reset(void);
  466. #endif
  467. /* $(BOARD)/$(BOARD).c */
  468. int board_early_init_f (void);
  469. int board_late_init (void);
  470. int board_postclk_init (void); /* after clocks/timebase, before env/serial */
  471. int board_early_init_r (void);
  472. void board_poweroff (void);
  473. #if defined(CONFIG_SYS_DRAM_TEST)
  474. int testdram(void);
  475. #endif /* CONFIG_SYS_DRAM_TEST */
  476. /* $(CPU)/start.S */
  477. #if defined(CONFIG_5xx) || \
  478. defined(CONFIG_8xx)
  479. uint get_immr (uint);
  480. #endif
  481. uint get_pir (void);
  482. #if defined(CONFIG_MPC5xxx)
  483. uint get_svr (void);
  484. #endif
  485. uint get_pvr (void);
  486. uint get_svr (void);
  487. uint rd_ic_cst (void);
  488. void wr_ic_cst (uint);
  489. void wr_ic_adr (uint);
  490. uint rd_dc_cst (void);
  491. void wr_dc_cst (uint);
  492. void wr_dc_adr (uint);
  493. int icache_status (void);
  494. void icache_enable (void);
  495. void icache_disable(void);
  496. int dcache_status (void);
  497. void dcache_enable (void);
  498. void dcache_disable(void);
  499. void mmu_disable(void);
  500. #if defined(CONFIG_ARM)
  501. void relocate_code(ulong);
  502. #else
  503. void relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn));
  504. #endif
  505. ulong get_endaddr (void);
  506. void trap_init (ulong);
  507. #if defined (CONFIG_4xx) || \
  508. defined (CONFIG_MPC5xxx) || \
  509. defined (CONFIG_74xx_7xx) || \
  510. defined (CONFIG_74x) || \
  511. defined (CONFIG_75x) || \
  512. defined (CONFIG_74xx) || \
  513. defined (CONFIG_MPC85xx) || \
  514. defined (CONFIG_MPC86xx) || \
  515. defined (CONFIG_MPC83xx)
  516. unsigned char in8(unsigned int);
  517. void out8(unsigned int, unsigned char);
  518. unsigned short in16(unsigned int);
  519. unsigned short in16r(unsigned int);
  520. void out16(unsigned int, unsigned short value);
  521. void out16r(unsigned int, unsigned short value);
  522. unsigned long in32(unsigned int);
  523. unsigned long in32r(unsigned int);
  524. void out32(unsigned int, unsigned long value);
  525. void out32r(unsigned int, unsigned long value);
  526. void ppcDcbf(unsigned long value);
  527. void ppcDcbi(unsigned long value);
  528. void ppcSync(void);
  529. void ppcDcbz(unsigned long value);
  530. #endif
  531. #if defined (CONFIG_MICROBLAZE)
  532. unsigned short in16(unsigned int);
  533. void out16(unsigned int, unsigned short value);
  534. #endif
  535. #if defined (CONFIG_MPC83xx)
  536. void ppcDWload(unsigned int *addr, unsigned int *ret);
  537. void ppcDWstore(unsigned int *addr, unsigned int *value);
  538. void disable_addr_trans(void);
  539. void enable_addr_trans(void);
  540. #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
  541. void ddr_enable_ecc(unsigned int dram_size);
  542. #endif
  543. #endif
  544. /*
  545. * Return the current value of a monotonically increasing microsecond timer.
  546. * Granularity may be larger than 1us if hardware does not support this.
  547. */
  548. ulong timer_get_us(void);
  549. /* $(CPU)/cpu.c */
  550. static inline int cpumask_next(int cpu, unsigned int mask)
  551. {
  552. for (cpu++; !((1 << cpu) & mask); cpu++)
  553. ;
  554. return cpu;
  555. }
  556. #define for_each_cpu(iter, cpu, num_cpus, mask) \
  557. for (iter = 0, cpu = cpumask_next(-1, mask); \
  558. iter < num_cpus; \
  559. iter++, cpu = cpumask_next(cpu, mask)) \
  560. int cpu_numcores (void);
  561. u32 cpu_mask (void);
  562. int is_core_valid (unsigned int);
  563. int probecpu (void);
  564. int checkcpu (void);
  565. int checkicache (void);
  566. int checkdcache (void);
  567. void upmconfig (unsigned int, unsigned int *, unsigned int);
  568. ulong get_tbclk (void);
  569. void reset_cpu (ulong addr);
  570. #if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
  571. void ft_cpu_setup(void *blob, bd_t *bd);
  572. #ifdef CONFIG_PCI
  573. void ft_pci_setup(void *blob, bd_t *bd);
  574. #endif
  575. #endif
  576. void smp_set_core_boot_addr(unsigned long addr, int corenr);
  577. void smp_kick_all_cpus(void);
  578. /* $(CPU)/serial.c */
  579. int serial_init (void);
  580. void serial_setbrg (void);
  581. void serial_putc (const char);
  582. void serial_putc_raw(const char);
  583. void serial_puts (const char *);
  584. int serial_getc (void);
  585. int serial_tstc (void);
  586. void _serial_setbrg (const int);
  587. void _serial_putc (const char, const int);
  588. void _serial_putc_raw(const char, const int);
  589. void _serial_puts (const char *, const int);
  590. int _serial_getc (const int);
  591. int _serial_tstc (const int);
  592. /* $(CPU)/speed.c */
  593. int get_clocks (void);
  594. int get_clocks_866 (void);
  595. int sdram_adjust_866 (void);
  596. int adjust_sdram_tbs_8xx (void);
  597. #if defined(CONFIG_MPC8260)
  598. int prt_8260_clks (void);
  599. #elif defined(CONFIG_MPC5xxx)
  600. int prt_mpc5xxx_clks (void);
  601. #endif
  602. #ifdef CONFIG_4xx
  603. ulong get_OPB_freq (void);
  604. ulong get_PCI_freq (void);
  605. #endif
  606. #if defined(CONFIG_S3C24X0) || \
  607. defined(CONFIG_LH7A40X) || \
  608. defined(CONFIG_EP93XX)
  609. ulong get_FCLK (void);
  610. ulong get_HCLK (void);
  611. ulong get_PCLK (void);
  612. ulong get_UCLK (void);
  613. #endif
  614. #if defined(CONFIG_LH7A40X)
  615. ulong get_PLLCLK (void);
  616. #endif
  617. #if defined CONFIG_INCA_IP
  618. uint incaip_get_cpuclk (void);
  619. #endif
  620. #if defined(CONFIG_IMX)
  621. ulong get_systemPLLCLK(void);
  622. ulong get_FCLK(void);
  623. ulong get_HCLK(void);
  624. ulong get_BCLK(void);
  625. ulong get_PERCLK1(void);
  626. ulong get_PERCLK2(void);
  627. ulong get_PERCLK3(void);
  628. #endif
  629. ulong get_bus_freq (ulong);
  630. int get_serial_clock(void);
  631. #if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx)
  632. ulong get_ddr_freq(ulong);
  633. #endif
  634. #if defined(CONFIG_MPC85xx)
  635. typedef MPC85xx_SYS_INFO sys_info_t;
  636. void get_sys_info ( sys_info_t * );
  637. # if defined(CONFIG_OF_LIBFDT)
  638. void ft_fixup_cpu(void *, u64);
  639. void ft_fixup_num_cores(void *);
  640. # endif
  641. #endif
  642. #if defined(CONFIG_MPC86xx)
  643. typedef MPC86xx_SYS_INFO sys_info_t;
  644. void get_sys_info ( sys_info_t * );
  645. static inline ulong get_ddr_freq(ulong dummy)
  646. {
  647. return get_bus_freq(dummy);
  648. }
  649. #endif
  650. #if defined(CONFIG_4xx)
  651. # if defined(CONFIG_440)
  652. # if defined(CONFIG_440SPE)
  653. unsigned long determine_sysper(void);
  654. unsigned long determine_pci_clock_per(void);
  655. # endif
  656. # endif
  657. typedef PPC4xx_SYS_INFO sys_info_t;
  658. int ppc440spe_revB(void);
  659. void get_sys_info ( sys_info_t * );
  660. #endif
  661. /* $(CPU)/cpu_init.c */
  662. #if defined(CONFIG_8xx) || defined(CONFIG_MPC8260)
  663. void cpu_init_f (volatile immap_t *immr);
  664. #endif
  665. #if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MCF52x2) ||defined(CONFIG_MPC86xx)
  666. void cpu_init_f (void);
  667. #endif
  668. int cpu_init_r (void);
  669. #if defined(CONFIG_MPC8260)
  670. int prt_8260_rsr (void);
  671. #elif defined(CONFIG_MPC83xx)
  672. int prt_83xx_rsr (void);
  673. #endif
  674. /* $(CPU)/interrupts.c */
  675. int interrupt_init (void);
  676. void timer_interrupt (struct pt_regs *);
  677. void external_interrupt (struct pt_regs *);
  678. void irq_install_handler(int, interrupt_handler_t *, void *);
  679. void irq_free_handler (int);
  680. void reset_timer (void);
  681. ulong get_timer (ulong base);
  682. /* Return value of monotonic microsecond timer */
  683. unsigned long timer_get_us(void);
  684. void enable_interrupts (void);
  685. int disable_interrupts (void);
  686. /* $(CPU)/.../commproc.c */
  687. int dpram_init (void);
  688. uint dpram_base(void);
  689. uint dpram_base_align(uint align);
  690. uint dpram_alloc(uint size);
  691. uint dpram_alloc_align(uint size,uint align);
  692. void bootcount_store (ulong);
  693. ulong bootcount_load (void);
  694. #define BOOTCOUNT_MAGIC 0xB001C041
  695. /* $(CPU)/.../<eth> */
  696. void mii_init (void);
  697. /* $(CPU)/.../lcd.c */
  698. ulong lcd_setmem (ulong);
  699. /* $(CPU)/.../video.c */
  700. ulong video_setmem (ulong);
  701. /* arch/$(ARCH)/lib/cache.c */
  702. void enable_caches(void);
  703. void flush_cache (unsigned long, unsigned long);
  704. void flush_dcache_all(void);
  705. void flush_dcache_range(unsigned long start, unsigned long stop);
  706. void invalidate_dcache_range(unsigned long start, unsigned long stop);
  707. void invalidate_dcache_all(void);
  708. void invalidate_icache_all(void);
  709. /* arch/$(ARCH)/lib/ticks.S */
  710. unsigned long long get_ticks(void);
  711. void wait_ticks (unsigned long);
  712. /* arch/$(ARCH)/lib/time.c */
  713. void __udelay (unsigned long);
  714. ulong usec2ticks (unsigned long usec);
  715. ulong ticks2usec (unsigned long ticks);
  716. int init_timebase (void);
  717. /* lib/gunzip.c */
  718. int gunzip(void *, int, unsigned char *, unsigned long *);
  719. int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
  720. int stoponerr, int offset);
  721. /* lib/qsort.c */
  722. void qsort(void *base, size_t nmemb, size_t size,
  723. int(*compar)(const void *, const void *));
  724. int strcmp_compar(const void *, const void *);
  725. /* lib/time.c */
  726. void udelay (unsigned long);
  727. void mdelay(unsigned long);
  728. /* lib/uuid.c */
  729. void uuid_bin_to_str(unsigned char *uuid, char *str);
  730. int uuid_str_to_bin(char *uuid, unsigned char *out);
  731. int uuid_str_valid(const char *uuid);
  732. /* lib/vsprintf.c */
  733. #include <vsprintf.h>
  734. /* lib/strmhz.c */
  735. char * strmhz(char *buf, unsigned long hz);
  736. /* lib/crc32.c */
  737. #include <u-boot/crc.h>
  738. /* lib/rand.c */
  739. #if defined(CONFIG_LIB_RAND) || defined(CONFIG_LIB_HW_RAND)
  740. #define RAND_MAX -1U
  741. void srand(unsigned int seed);
  742. unsigned int rand(void);
  743. unsigned int rand_r(unsigned int *seedp);
  744. #endif
  745. /* common/console.c */
  746. int console_init_f(void); /* Before relocation; uses the serial stuff */
  747. int console_init_r(void); /* After relocation; uses the console stuff */
  748. int console_assign(int file, const char *devname); /* Assign the console */
  749. int ctrlc (void);
  750. int had_ctrlc (void); /* have we had a Control-C since last clear? */
  751. void clear_ctrlc (void); /* clear the Control-C condition */
  752. int disable_ctrlc (int); /* 1 to disable, 0 to enable Control-C detect */
  753. /*
  754. * STDIO based functions (can always be used)
  755. */
  756. /* serial stuff */
  757. int serial_printf (const char *fmt, ...)
  758. __attribute__ ((format (__printf__, 1, 2)));
  759. /* stdin */
  760. int getc(void);
  761. int tstc(void);
  762. /* stdout */
  763. void putc(const char c);
  764. void puts(const char *s);
  765. int printf(const char *fmt, ...)
  766. __attribute__ ((format (__printf__, 1, 2)));
  767. int vprintf(const char *fmt, va_list args);
  768. /* stderr */
  769. #define eputc(c) fputc(stderr, c)
  770. #define eputs(s) fputs(stderr, s)
  771. #define eprintf(fmt,args...) fprintf(stderr,fmt ,##args)
  772. /*
  773. * FILE based functions (can only be used AFTER relocation!)
  774. */
  775. #define stdin 0
  776. #define stdout 1
  777. #define stderr 2
  778. #define MAX_FILES 3
  779. int fprintf(int file, const char *fmt, ...)
  780. __attribute__ ((format (__printf__, 2, 3)));
  781. void fputs(int file, const char *s);
  782. void fputc(int file, const char c);
  783. int ftstc(int file);
  784. int fgetc(int file);
  785. /* lib/gzip.c */
  786. int gzip(void *dst, unsigned long *lenp,
  787. unsigned char *src, unsigned long srclen);
  788. int zzip(void *dst, unsigned long *lenp, unsigned char *src,
  789. unsigned long srclen, int stoponerr,
  790. int (*func)(unsigned long, unsigned long));
  791. /* lib/net_utils.c */
  792. #include <net.h>
  793. static inline IPaddr_t getenv_IPaddr(char *var)
  794. {
  795. return string_to_ip(getenv(var));
  796. }
  797. /*
  798. * CONSOLE multiplexing.
  799. */
  800. #ifdef CONFIG_CONSOLE_MUX
  801. #include <iomux.h>
  802. #endif
  803. int pcmcia_init (void);
  804. #ifdef CONFIG_STATUS_LED
  805. # include <status_led.h>
  806. #endif
  807. #include <bootstage.h>
  808. #ifdef CONFIG_SHOW_ACTIVITY
  809. void show_activity(int arg);
  810. #endif
  811. /* Multicore arch functions */
  812. #ifdef CONFIG_MP
  813. int cpu_status(int nr);
  814. int cpu_reset(int nr);
  815. int cpu_disable(int nr);
  816. int cpu_release(int nr, int argc, char * const argv[]);
  817. #endif
  818. /* Define a null map_sysmem() if the architecture doesn't use it */
  819. # ifndef CONFIG_ARCH_MAP_SYSMEM
  820. static inline void *map_sysmem(phys_addr_t paddr, unsigned long len)
  821. {
  822. return (void *)(uintptr_t)paddr;
  823. }
  824. static inline void unmap_sysmem(const void *vaddr)
  825. {
  826. }
  827. static inline phys_addr_t map_to_sysmem(const void *ptr)
  828. {
  829. return (phys_addr_t)(uintptr_t)ptr;
  830. }
  831. # endif
  832. #endif /* __ASSEMBLY__ */
  833. #ifdef CONFIG_PPC
  834. /*
  835. * Has to be included outside of the #ifndef __ASSEMBLY__ section.
  836. * Otherwise might lead to compilation errors in assembler files.
  837. */
  838. #include <asm/cache.h>
  839. #endif
  840. /* Put only stuff here that the assembler can digest */
  841. #ifdef CONFIG_POST
  842. #define CONFIG_HAS_POST
  843. #ifndef CONFIG_POST_ALT_LIST
  844. #define CONFIG_POST_STD_LIST
  845. #endif
  846. #endif
  847. #ifdef CONFIG_INIT_CRITICAL
  848. #error CONFIG_INIT_CRITICAL is deprecated!
  849. #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
  850. #endif
  851. #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
  852. #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
  853. #define DIV_ROUND(n,d) (((n) + ((d)/2)) / (d))
  854. #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
  855. #define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
  856. /*
  857. * Divide positive or negative dividend by positive divisor and round
  858. * to closest integer. Result is undefined for negative divisors and
  859. * for negative dividends if the divisor variable type is unsigned.
  860. */
  861. #define DIV_ROUND_CLOSEST(x, divisor)( \
  862. { \
  863. typeof(x) __x = x; \
  864. typeof(divisor) __d = divisor; \
  865. (((typeof(x))-1) > 0 || \
  866. ((typeof(divisor))-1) > 0 || (__x) > 0) ? \
  867. (((__x) + ((__d) / 2)) / (__d)) : \
  868. (((__x) - ((__d) / 2)) / (__d)); \
  869. } \
  870. )
  871. #define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1)
  872. #define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask))
  873. /*
  874. * ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture. It
  875. * is used to align DMA buffers.
  876. */
  877. #ifndef __ASSEMBLY__
  878. #include <asm/cache.h>
  879. #endif
  880. /*
  881. * The ALLOC_CACHE_ALIGN_BUFFER macro is used to allocate a buffer on the
  882. * stack that meets the minimum architecture alignment requirements for DMA.
  883. * Such a buffer is useful for DMA operations where flushing and invalidating
  884. * the cache before and after a read and/or write operation is required for
  885. * correct operations.
  886. *
  887. * When called the macro creates an array on the stack that is sized such
  888. * that:
  889. *
  890. * 1) The beginning of the array can be advanced enough to be aligned.
  891. *
  892. * 2) The size of the aligned portion of the array is a multiple of the minimum
  893. * architecture alignment required for DMA.
  894. *
  895. * 3) The aligned portion contains enough space for the original number of
  896. * elements requested.
  897. *
  898. * The macro then creates a pointer to the aligned portion of this array and
  899. * assigns to the pointer the address of the first element in the aligned
  900. * portion of the array.
  901. *
  902. * Calling the macro as:
  903. *
  904. * ALLOC_CACHE_ALIGN_BUFFER(uint32_t, buffer, 1024);
  905. *
  906. * Will result in something similar to saying:
  907. *
  908. * uint32_t buffer[1024];
  909. *
  910. * The following differences exist:
  911. *
  912. * 1) The resulting buffer is guaranteed to be aligned to the value of
  913. * ARCH_DMA_MINALIGN.
  914. *
  915. * 2) The buffer variable created by the macro is a pointer to the specified
  916. * type, and NOT an array of the specified type. This can be very important
  917. * if you want the address of the buffer, which you probably do, to pass it
  918. * to the DMA hardware. The value of &buffer is different in the two cases.
  919. * In the macro case it will be the address of the pointer, not the address
  920. * of the space reserved for the buffer. However, in the second case it
  921. * would be the address of the buffer. So if you are replacing hard coded
  922. * stack buffers with this macro you need to make sure you remove the & from
  923. * the locations where you are taking the address of the buffer.
  924. *
  925. * Note that the size parameter is the number of array elements to allocate,
  926. * not the number of bytes.
  927. *
  928. * This macro can not be used outside of function scope, or for the creation
  929. * of a function scoped static buffer. It can not be used to create a cache
  930. * line aligned global buffer.
  931. */
  932. #define PAD_COUNT(s, pad) (((s) - 1) / (pad) + 1)
  933. #define PAD_SIZE(s, pad) (PAD_COUNT(s, pad) * pad)
  934. #define ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, pad) \
  935. char __##name[ROUND(PAD_SIZE((size) * sizeof(type), pad), align) \
  936. + (align - 1)]; \
  937. \
  938. type *name = (type *) ALIGN((uintptr_t)__##name, align)
  939. #define ALLOC_ALIGN_BUFFER(type, name, size, align) \
  940. ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, 1)
  941. #define ALLOC_CACHE_ALIGN_BUFFER_PAD(type, name, size, pad) \
  942. ALLOC_ALIGN_BUFFER_PAD(type, name, size, ARCH_DMA_MINALIGN, pad)
  943. #define ALLOC_CACHE_ALIGN_BUFFER(type, name, size) \
  944. ALLOC_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
  945. /*
  946. * DEFINE_CACHE_ALIGN_BUFFER() is similar to ALLOC_CACHE_ALIGN_BUFFER, but it's
  947. * purpose is to allow allocating aligned buffers outside of function scope.
  948. * Usage of this macro shall be avoided or used with extreme care!
  949. */
  950. #define DEFINE_ALIGN_BUFFER(type, name, size, align) \
  951. static char __##name[roundup(size * sizeof(type), align)] \
  952. __aligned(align); \
  953. \
  954. static type *name = (type *)__##name
  955. #define DEFINE_CACHE_ALIGN_BUFFER(type, name, size) \
  956. DEFINE_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
  957. /* Pull in stuff for the build system */
  958. #ifdef DO_DEPS_ONLY
  959. # include <environment.h>
  960. #endif
  961. #endif /* __COMMON_H_ */