Página inicial Explorar Ajuda
Entrar
coolsoul
/
u-boot
1
0
Fork 0
Arquivos Issues 0 Pull Requests 0 Wiki
Tree: a3a28f5f0c
Branches Tags
u-boot
/
board
/
bachmann
/
ot1200
Anatolij Gustschin 30df9f770b imx6: drop duplicated bss memset and board_init_r() call 7 anos atrás
..
Kconfig f20562e4c4 mx6: remove SYS_SOC from board Kconfig 9 anos atrás
MAINTAINERS 39d0973300 imx6: add Bachmann OT1200 board 10 anos atrás
Makefile 5324917126 ot1200: add basic SPL support 10 anos atrás
README 39d0973300 imx6: add Bachmann OT1200 board 10 anos atrás
mx6q_4x_mt41j128.cfg 84c5dd16a4 ot1200: move ccgr and gpr init to c functions 10 anos atrás
ot1200.c 3aa4b703b4 imx: imx6: Move gpr_init() function to soc.c 7 anos atrás
ot1200_spl.c 30df9f770b imx6: drop duplicated bss memset and board_init_r() call 7 anos atrás

README

U-Boot for the Bachmann electronic GmbH OT1200 devices

There are two different versions of the base board, which differ
in the way ethernet is done. The variant detection is done during
runtime based on the address of the found phy.

- "mr" variant
FEC is connected directly to an ethernet switch (KSZ8895). The ethernet
port is always up and auto-negotiation is not possible.

- normal variant
FEC is connected to a normal phy and auto-negotiation is possible.


The variant name is part of the dtb file name loaded by u-boot. This
make is possible to boot the linux kernel and make use variant specific
devicetree (fixed-phy link).

In order to support different display resoltuions/sizes the OT1200 devices
are making use of EDID data stored in an i2c EEPROM.