common.h 29 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039
  1. /*
  2. * (C) Copyright 2000-2009
  3. * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  4. *
  5. * See file CREDITS for list of people who contributed to this
  6. * project.
  7. *
  8. * This program is free software; you can redistribute it and/or
  9. * modify it under the terms of the GNU General Public License as
  10. * published by the Free Software Foundation; either version 2 of
  11. * the License, or (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program; if not, write to the Free Software
  20. * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21. * MA 02111-1307 USA
  22. */
  23. #ifndef __COMMON_H_
  24. #define __COMMON_H_ 1
  25. #undef _LINUX_CONFIG_H
  26. #define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
  27. #ifndef __ASSEMBLY__ /* put C only stuff in this section */
  28. typedef unsigned char uchar;
  29. typedef volatile unsigned long vu_long;
  30. typedef volatile unsigned short vu_short;
  31. typedef volatile unsigned char vu_char;
  32. #include <config.h>
  33. #include <asm-offsets.h>
  34. #include <linux/bitops.h>
  35. #include <linux/types.h>
  36. #include <linux/string.h>
  37. #include <linux/stringify.h>
  38. #include <asm/ptrace.h>
  39. #include <stdarg.h>
  40. #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
  41. #include <pci.h>
  42. #endif
  43. #if defined(CONFIG_8xx)
  44. #include <asm/8xx_immap.h>
  45. #if defined(CONFIG_MPC852) || defined(CONFIG_MPC852T) || \
  46. defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \
  47. defined(CONFIG_MPC859DSL) || \
  48. defined(CONFIG_MPC866) || defined(CONFIG_MPC866T) || \
  49. defined(CONFIG_MPC866P)
  50. # define CONFIG_MPC866_FAMILY 1
  51. #elif defined(CONFIG_MPC870) \
  52. || defined(CONFIG_MPC875) \
  53. || defined(CONFIG_MPC880) \
  54. || defined(CONFIG_MPC885)
  55. # define CONFIG_MPC885_FAMILY 1
  56. #endif
  57. #if defined(CONFIG_MPC860) \
  58. || defined(CONFIG_MPC860T) \
  59. || defined(CONFIG_MPC866_FAMILY) \
  60. || defined(CONFIG_MPC885_FAMILY)
  61. # define CONFIG_MPC86x 1
  62. #endif
  63. #elif defined(CONFIG_5xx)
  64. #include <asm/5xx_immap.h>
  65. #elif defined(CONFIG_MPC5xxx)
  66. #include <mpc5xxx.h>
  67. #elif defined(CONFIG_MPC512X)
  68. #include <asm/immap_512x.h>
  69. #elif defined(CONFIG_MPC8220)
  70. #include <asm/immap_8220.h>
  71. #elif defined(CONFIG_8260)
  72. #if defined(CONFIG_MPC8247) \
  73. || defined(CONFIG_MPC8248) \
  74. || defined(CONFIG_MPC8271) \
  75. || defined(CONFIG_MPC8272)
  76. #define CONFIG_MPC8272_FAMILY 1
  77. #endif
  78. #if defined(CONFIG_MPC8272_FAMILY)
  79. #define CONFIG_MPC8260 1
  80. #endif
  81. #include <asm/immap_8260.h>
  82. #endif
  83. #ifdef CONFIG_MPC86xx
  84. #include <mpc86xx.h>
  85. #include <asm/immap_86xx.h>
  86. #endif
  87. #ifdef CONFIG_MPC85xx
  88. #include <mpc85xx.h>
  89. #include <asm/immap_85xx.h>
  90. #endif
  91. #ifdef CONFIG_MPC83xx
  92. #include <mpc83xx.h>
  93. #include <asm/immap_83xx.h>
  94. #endif
  95. #ifdef CONFIG_4xx
  96. #include <asm/ppc4xx.h>
  97. #endif
  98. #ifdef CONFIG_HYMOD
  99. #include <board/hymod/hymod.h>
  100. #endif
  101. #ifdef CONFIG_ARM
  102. #define asmlinkage /* nothing */
  103. #endif
  104. #ifdef CONFIG_BLACKFIN
  105. #include <asm/blackfin.h>
  106. #endif
  107. #ifdef CONFIG_SOC_DA8XX
  108. #include <asm/arch/hardware.h>
  109. #endif
  110. #include <part.h>
  111. #include <flash.h>
  112. #include <image.h>
  113. #ifdef DEBUG
  114. #define _DEBUG 1
  115. #else
  116. #define _DEBUG 0
  117. #endif
  118. /*
  119. * Output a debug text when condition "cond" is met. The "cond" should be
  120. * computed by a preprocessor in the best case, allowing for the best
  121. * optimization.
  122. */
  123. #define debug_cond(cond, fmt, args...) \
  124. do { \
  125. if (cond) \
  126. printf(fmt, ##args); \
  127. } while (0)
  128. #define debug(fmt, args...) \
  129. debug_cond(_DEBUG, fmt, ##args)
  130. /*
  131. * An assertion is run-time check done in debug mode only. If DEBUG is not
  132. * defined then it is skipped. If DEBUG is defined and the assertion fails,
  133. * then it calls panic*( which may or may not reset/halt U-Boot (see
  134. * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
  135. * before release, and after release it is hoped that they don't matter. But
  136. * in any case these failing assertions cannot be fixed with a reset (which
  137. * may just do the same assertion again).
  138. */
  139. void __assert_fail(const char *assertion, const char *file, unsigned line,
  140. const char *function);
  141. #define assert(x) \
  142. ({ if (!(x) && _DEBUG) \
  143. __assert_fail(#x, __FILE__, __LINE__, __func__); })
  144. #define error(fmt, args...) do { \
  145. printf("ERROR: " fmt "\nat %s:%d/%s()\n", \
  146. ##args, __FILE__, __LINE__, __func__); \
  147. } while (0)
  148. #ifndef BUG
  149. #define BUG() do { \
  150. printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
  151. panic("BUG!"); \
  152. } while (0)
  153. #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
  154. #endif /* BUG */
  155. /* Force a compilation error if condition is true */
  156. #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
  157. typedef void (interrupt_handler_t)(void *);
  158. #include <asm/u-boot.h> /* boot information for Linux kernel */
  159. #include <asm/global_data.h> /* global data used for startup functions */
  160. /*
  161. * enable common handling for all TQM8xxL/M boards:
  162. * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
  163. * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
  164. * and for the TQM885D board
  165. */
  166. #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
  167. defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
  168. defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
  169. # ifndef CONFIG_TQM8xxM
  170. # define CONFIG_TQM8xxM
  171. # endif
  172. #endif
  173. #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
  174. defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
  175. defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
  176. defined(CONFIG_TQM885D)
  177. # ifndef CONFIG_TQM8xxL
  178. # define CONFIG_TQM8xxL
  179. # endif
  180. #endif
  181. /*
  182. * General Purpose Utilities
  183. */
  184. #define min(X, Y) \
  185. ({ typeof (X) __x = (X); \
  186. typeof (Y) __y = (Y); \
  187. (__x < __y) ? __x : __y; })
  188. #define max(X, Y) \
  189. ({ typeof (X) __x = (X); \
  190. typeof (Y) __y = (Y); \
  191. (__x > __y) ? __x : __y; })
  192. #define MIN(x, y) min(x, y)
  193. #define MAX(x, y) max(x, y)
  194. /*
  195. * Return the absolute value of a number.
  196. *
  197. * This handles unsigned and signed longs, ints, shorts and chars. For all
  198. * input types abs() returns a signed long.
  199. *
  200. * For 64-bit types, use abs64()
  201. */
  202. #define abs(x) ({ \
  203. long ret; \
  204. if (sizeof(x) == sizeof(long)) { \
  205. long __x = (x); \
  206. ret = (__x < 0) ? -__x : __x; \
  207. } else { \
  208. int __x = (x); \
  209. ret = (__x < 0) ? -__x : __x; \
  210. } \
  211. ret; \
  212. })
  213. #define abs64(x) ({ \
  214. s64 __x = (x); \
  215. (__x < 0) ? -__x : __x; \
  216. })
  217. #if defined(CONFIG_ENV_IS_EMBEDDED)
  218. #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
  219. #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
  220. (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
  221. defined(CONFIG_ENV_IS_IN_NVRAM)
  222. #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
  223. #else
  224. #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
  225. #endif
  226. /**
  227. * container_of - cast a member of a structure out to the containing structure
  228. * @ptr: the pointer to the member.
  229. * @type: the type of the container struct this is embedded in.
  230. * @member: the name of the member within the struct.
  231. *
  232. */
  233. #define container_of(ptr, type, member) ({ \
  234. const typeof( ((type *)0)->member ) *__mptr = (ptr); \
  235. (type *)( (char *)__mptr - offsetof(type,member) );})
  236. /*
  237. * Function Prototypes
  238. */
  239. void hang (void) __attribute__ ((noreturn));
  240. int timer_init(void);
  241. int cpu_init(void);
  242. /* */
  243. phys_size_t initdram (int);
  244. int display_options (void);
  245. void print_size(unsigned long long, const char *);
  246. int print_buffer(ulong addr, const void *data, uint width, uint count,
  247. uint linelen);
  248. /* common/main.c */
  249. void main_loop (void);
  250. int run_command(const char *cmd, int flag);
  251. /**
  252. * Run a list of commands separated by ; or even \0
  253. *
  254. * Note that if 'len' is not -1, then the command does not need to be nul
  255. * terminated, Memory will be allocated for the command in that case.
  256. *
  257. * @param cmd List of commands to run, each separated bu semicolon
  258. * @param len Length of commands excluding terminator if known (-1 if not)
  259. * @param flag Execution flags (CMD_FLAG_...)
  260. * @return 0 on success, or != 0 on error.
  261. */
  262. int run_command_list(const char *cmd, int len, int flag);
  263. int readline (const char *const prompt);
  264. int readline_into_buffer(const char *const prompt, char *buffer,
  265. int timeout);
  266. int parse_line (char *, char *[]);
  267. void init_cmd_timeout(void);
  268. void reset_cmd_timeout(void);
  269. #ifdef CONFIG_MENU
  270. int abortboot(int bootdelay);
  271. #endif
  272. extern char console_buffer[];
  273. /* arch/$(ARCH)/lib/board.c */
  274. void board_init_f(ulong);
  275. void board_init_r (gd_t *, ulong) __attribute__ ((noreturn));
  276. int checkboard (void);
  277. int checkflash (void);
  278. int checkdram (void);
  279. int last_stage_init(void);
  280. extern ulong monitor_flash_len;
  281. int mac_read_from_eeprom(void);
  282. extern u8 _binary_dt_dtb_start[]; /* embedded device tree blob */
  283. int set_cpu_clk_info(void);
  284. int print_cpuinfo(void);
  285. int update_flash_size(int flash_size);
  286. /**
  287. * Show the DRAM size in a board-specific way
  288. *
  289. * This is used by boards to display DRAM information in their own way.
  290. *
  291. * @param size Size of DRAM (which should be displayed along with other info)
  292. */
  293. void board_show_dram(ulong size);
  294. /* common/flash.c */
  295. void flash_perror (int);
  296. /* common/cmd_source.c */
  297. int source (ulong addr, const char *fit_uname);
  298. extern ulong load_addr; /* Default Load Address */
  299. extern ulong save_addr; /* Default Save Address */
  300. extern ulong save_size; /* Default Save Size */
  301. /* common/cmd_doc.c */
  302. void doc_probe(unsigned long physadr);
  303. /* common/cmd_net.c */
  304. int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
  305. /* common/cmd_fat.c */
  306. int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
  307. /* common/cmd_ext2.c */
  308. int do_ext2load(cmd_tbl_t *, int, int, char * const []);
  309. /* common/cmd_nvedit.c */
  310. int env_init (void);
  311. void env_relocate (void);
  312. int envmatch (uchar *, int);
  313. char *getenv (const char *);
  314. int getenv_f (const char *name, char *buf, unsigned len);
  315. ulong getenv_ulong(const char *name, int base, ulong default_val);
  316. /**
  317. * getenv_hex() - Return an environment variable as a hex value
  318. *
  319. * Decode an environment as a hex number (it may or may not have a 0x
  320. * prefix). If the environment variable cannot be found, or does not start
  321. * with hex digits, the default value is returned.
  322. *
  323. * @varname: Variable to decode
  324. * @default_val: Value to return on error
  325. */
  326. ulong getenv_hex(const char *varname, ulong default_val);
  327. /*
  328. * Read an environment variable as a boolean
  329. * Return -1 if variable does not exist (default to true)
  330. */
  331. int getenv_yesno(const char *var);
  332. int saveenv (void);
  333. int setenv (const char *, const char *);
  334. int setenv_ulong(const char *varname, ulong value);
  335. int setenv_hex(const char *varname, ulong value);
  336. /**
  337. * setenv_addr - Set an environment variable to an address in hex
  338. *
  339. * @varname: Environmet variable to set
  340. * @addr: Value to set it to
  341. * @return 0 if ok, 1 on error
  342. */
  343. static inline int setenv_addr(const char *varname, const void *addr)
  344. {
  345. return setenv_hex(varname, (ulong)addr);
  346. }
  347. #ifdef CONFIG_ARM
  348. # include <asm/mach-types.h>
  349. # include <asm/setup.h>
  350. # include <asm/u-boot-arm.h> /* ARM version to be fixed! */
  351. #endif /* CONFIG_ARM */
  352. #ifdef CONFIG_X86 /* x86 version to be fixed! */
  353. # include <asm/u-boot-x86.h>
  354. #endif /* CONFIG_X86 */
  355. #ifdef CONFIG_SANDBOX
  356. # include <asm/u-boot-sandbox.h> /* TODO(sjg) what needs to be fixed? */
  357. #endif
  358. #ifdef CONFIG_NDS32
  359. # include <asm/mach-types.h>
  360. # include <asm/u-boot-nds32.h>
  361. #endif /* CONFIG_NDS32 */
  362. #ifdef CONFIG_MIPS
  363. # include <asm/u-boot-mips.h>
  364. #endif /* CONFIG_MIPS */
  365. #ifdef CONFIG_AUTO_COMPLETE
  366. int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf);
  367. #endif
  368. int get_env_id (void);
  369. void pci_init (void);
  370. void pci_init_board(void);
  371. void pciinfo (int, int);
  372. #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
  373. int pci_pre_init (struct pci_controller *);
  374. int is_pci_host (struct pci_controller *);
  375. #endif
  376. #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
  377. # if defined(CONFIG_SYS_PCI_TARGET_INIT)
  378. void pci_target_init (struct pci_controller *);
  379. # endif
  380. # if defined(CONFIG_SYS_PCI_MASTER_INIT)
  381. void pci_master_init (struct pci_controller *);
  382. # endif
  383. #if defined(CONFIG_440SPE) || \
  384. defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
  385. defined(CONFIG_405EX)
  386. void pcie_setup_hoses(int busno);
  387. #endif
  388. #endif
  389. int misc_init_f (void);
  390. int misc_init_r (void);
  391. /* common/exports.c */
  392. void jumptable_init(void);
  393. /* common/kallsysm.c */
  394. const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
  395. /* api/api.c */
  396. void api_init (void);
  397. /* common/memsize.c */
  398. long get_ram_size (long *, long);
  399. /* $(BOARD)/$(BOARD).c */
  400. void reset_phy (void);
  401. void fdc_hw_init (void);
  402. /* $(BOARD)/eeprom.c */
  403. void eeprom_init (void);
  404. #ifndef CONFIG_SPI
  405. int eeprom_probe (unsigned dev_addr, unsigned offset);
  406. #endif
  407. int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
  408. int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
  409. #ifdef CONFIG_LWMON
  410. extern uchar pic_read (uchar reg);
  411. extern void pic_write (uchar reg, uchar val);
  412. #endif
  413. /*
  414. * Set this up regardless of board
  415. * type, to prevent errors.
  416. */
  417. #if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR)
  418. # define CONFIG_SYS_DEF_EEPROM_ADDR 0
  419. #else
  420. #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
  421. # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
  422. #endif
  423. #endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */
  424. #if defined(CONFIG_SPI)
  425. extern void spi_init_f (void);
  426. extern void spi_init_r (void);
  427. extern ssize_t spi_read (uchar *, int, uchar *, int);
  428. extern ssize_t spi_write (uchar *, int, uchar *, int);
  429. #endif
  430. #ifdef CONFIG_RPXCLASSIC
  431. void rpxclassic_init (void);
  432. #endif
  433. void rpxlite_init (void);
  434. #ifdef CONFIG_MBX
  435. /* $(BOARD)/mbx8xx.c */
  436. void mbx_init (void);
  437. void board_serial_init (void);
  438. void board_ether_init (void);
  439. #endif
  440. #ifdef CONFIG_HERMES
  441. /* $(BOARD)/hermes.c */
  442. void hermes_start_lxt980 (int speed);
  443. #endif
  444. #ifdef CONFIG_EVB64260
  445. void evb64260_init(void);
  446. void debug_led(int, int);
  447. void display_mem_map(void);
  448. void perform_soft_reset(void);
  449. #endif
  450. /* $(BOARD)/$(BOARD).c */
  451. int board_early_init_f (void);
  452. int board_late_init (void);
  453. int board_postclk_init (void); /* after clocks/timebase, before env/serial */
  454. int board_early_init_r (void);
  455. void board_poweroff (void);
  456. #if defined(CONFIG_SYS_DRAM_TEST)
  457. int testdram(void);
  458. #endif /* CONFIG_SYS_DRAM_TEST */
  459. /* $(CPU)/start.S */
  460. #if defined(CONFIG_5xx) || \
  461. defined(CONFIG_8xx)
  462. uint get_immr (uint);
  463. #endif
  464. uint get_pir (void);
  465. #if defined(CONFIG_MPC5xxx)
  466. uint get_svr (void);
  467. #endif
  468. uint get_pvr (void);
  469. uint get_svr (void);
  470. uint rd_ic_cst (void);
  471. void wr_ic_cst (uint);
  472. void wr_ic_adr (uint);
  473. uint rd_dc_cst (void);
  474. void wr_dc_cst (uint);
  475. void wr_dc_adr (uint);
  476. int icache_status (void);
  477. void icache_enable (void);
  478. void icache_disable(void);
  479. int dcache_status (void);
  480. void dcache_enable (void);
  481. void dcache_disable(void);
  482. void mmu_disable(void);
  483. #if defined(CONFIG_ARM)
  484. void relocate_code(ulong);
  485. #else
  486. void relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn));
  487. #endif
  488. ulong get_endaddr (void);
  489. void trap_init (ulong);
  490. #if defined (CONFIG_4xx) || \
  491. defined (CONFIG_MPC5xxx) || \
  492. defined (CONFIG_74xx_7xx) || \
  493. defined (CONFIG_74x) || \
  494. defined (CONFIG_75x) || \
  495. defined (CONFIG_74xx) || \
  496. defined (CONFIG_MPC8220) || \
  497. defined (CONFIG_MPC85xx) || \
  498. defined (CONFIG_MPC86xx) || \
  499. defined (CONFIG_MPC83xx)
  500. unsigned char in8(unsigned int);
  501. void out8(unsigned int, unsigned char);
  502. unsigned short in16(unsigned int);
  503. unsigned short in16r(unsigned int);
  504. void out16(unsigned int, unsigned short value);
  505. void out16r(unsigned int, unsigned short value);
  506. unsigned long in32(unsigned int);
  507. unsigned long in32r(unsigned int);
  508. void out32(unsigned int, unsigned long value);
  509. void out32r(unsigned int, unsigned long value);
  510. void ppcDcbf(unsigned long value);
  511. void ppcDcbi(unsigned long value);
  512. void ppcSync(void);
  513. void ppcDcbz(unsigned long value);
  514. #endif
  515. #if defined (CONFIG_MICROBLAZE)
  516. unsigned short in16(unsigned int);
  517. void out16(unsigned int, unsigned short value);
  518. #endif
  519. #if defined (CONFIG_MPC83xx)
  520. void ppcDWload(unsigned int *addr, unsigned int *ret);
  521. void ppcDWstore(unsigned int *addr, unsigned int *value);
  522. void disable_addr_trans(void);
  523. void enable_addr_trans(void);
  524. #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
  525. void ddr_enable_ecc(unsigned int dram_size);
  526. #endif
  527. #endif
  528. /* $(CPU)/cpu.c */
  529. static inline int cpumask_next(int cpu, unsigned int mask)
  530. {
  531. for (cpu++; !((1 << cpu) & mask); cpu++)
  532. ;
  533. return cpu;
  534. }
  535. #define for_each_cpu(iter, cpu, num_cpus, mask) \
  536. for (iter = 0, cpu = cpumask_next(-1, mask); \
  537. iter < num_cpus; \
  538. iter++, cpu = cpumask_next(cpu, mask)) \
  539. int cpu_numcores (void);
  540. u32 cpu_mask (void);
  541. int is_core_valid (unsigned int);
  542. int probecpu (void);
  543. int checkcpu (void);
  544. int checkicache (void);
  545. int checkdcache (void);
  546. void upmconfig (unsigned int, unsigned int *, unsigned int);
  547. ulong get_tbclk (void);
  548. void reset_cpu (ulong addr);
  549. #if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
  550. void ft_cpu_setup(void *blob, bd_t *bd);
  551. #ifdef CONFIG_PCI
  552. void ft_pci_setup(void *blob, bd_t *bd);
  553. #endif
  554. #endif
  555. /* $(CPU)/serial.c */
  556. int serial_init (void);
  557. void serial_setbrg (void);
  558. void serial_putc (const char);
  559. void serial_putc_raw(const char);
  560. void serial_puts (const char *);
  561. int serial_getc (void);
  562. int serial_tstc (void);
  563. void _serial_setbrg (const int);
  564. void _serial_putc (const char, const int);
  565. void _serial_putc_raw(const char, const int);
  566. void _serial_puts (const char *, const int);
  567. int _serial_getc (const int);
  568. int _serial_tstc (const int);
  569. /* $(CPU)/speed.c */
  570. int get_clocks (void);
  571. int get_clocks_866 (void);
  572. int sdram_adjust_866 (void);
  573. int adjust_sdram_tbs_8xx (void);
  574. #if defined(CONFIG_8260)
  575. int prt_8260_clks (void);
  576. #elif defined(CONFIG_MPC5xxx)
  577. int prt_mpc5xxx_clks (void);
  578. #endif
  579. #if defined(CONFIG_MPC512X)
  580. int prt_mpc512xxx_clks (void);
  581. #endif
  582. #if defined(CONFIG_MPC8220)
  583. int prt_mpc8220_clks (void);
  584. #endif
  585. #ifdef CONFIG_4xx
  586. ulong get_OPB_freq (void);
  587. ulong get_PCI_freq (void);
  588. #endif
  589. #if defined(CONFIG_S3C24X0) || \
  590. defined(CONFIG_LH7A40X) || \
  591. defined(CONFIG_EP93XX)
  592. ulong get_FCLK (void);
  593. ulong get_HCLK (void);
  594. ulong get_PCLK (void);
  595. ulong get_UCLK (void);
  596. #endif
  597. #if defined(CONFIG_LH7A40X)
  598. ulong get_PLLCLK (void);
  599. #endif
  600. #if defined CONFIG_INCA_IP
  601. uint incaip_get_cpuclk (void);
  602. #endif
  603. #if defined(CONFIG_IMX)
  604. ulong get_systemPLLCLK(void);
  605. ulong get_FCLK(void);
  606. ulong get_HCLK(void);
  607. ulong get_BCLK(void);
  608. ulong get_PERCLK1(void);
  609. ulong get_PERCLK2(void);
  610. ulong get_PERCLK3(void);
  611. #endif
  612. ulong get_bus_freq (ulong);
  613. int get_serial_clock(void);
  614. #if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx)
  615. ulong get_ddr_freq(ulong);
  616. #endif
  617. #if defined(CONFIG_MPC85xx)
  618. typedef MPC85xx_SYS_INFO sys_info_t;
  619. void get_sys_info ( sys_info_t * );
  620. #endif
  621. #if defined(CONFIG_MPC86xx)
  622. typedef MPC86xx_SYS_INFO sys_info_t;
  623. void get_sys_info ( sys_info_t * );
  624. static inline ulong get_ddr_freq(ulong dummy)
  625. {
  626. return get_bus_freq(dummy);
  627. }
  628. #endif
  629. #if defined(CONFIG_4xx)
  630. # if defined(CONFIG_440)
  631. # if defined(CONFIG_440SPE)
  632. unsigned long determine_sysper(void);
  633. unsigned long determine_pci_clock_per(void);
  634. # endif
  635. # endif
  636. typedef PPC4xx_SYS_INFO sys_info_t;
  637. int ppc440spe_revB(void);
  638. void get_sys_info ( sys_info_t * );
  639. #endif
  640. /* $(CPU)/cpu_init.c */
  641. #if defined(CONFIG_8xx) || defined(CONFIG_8260)
  642. void cpu_init_f (volatile immap_t *immr);
  643. #endif
  644. #if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MCF52x2) ||defined(CONFIG_MPC86xx)
  645. void cpu_init_f (void);
  646. #endif
  647. int cpu_init_r (void);
  648. #if defined(CONFIG_8260)
  649. int prt_8260_rsr (void);
  650. #elif defined(CONFIG_MPC83xx)
  651. int prt_83xx_rsr (void);
  652. #endif
  653. /* $(CPU)/interrupts.c */
  654. int interrupt_init (void);
  655. void timer_interrupt (struct pt_regs *);
  656. void external_interrupt (struct pt_regs *);
  657. void irq_install_handler(int, interrupt_handler_t *, void *);
  658. void irq_free_handler (int);
  659. void reset_timer (void);
  660. ulong get_timer (ulong base);
  661. void enable_interrupts (void);
  662. int disable_interrupts (void);
  663. /* $(CPU)/.../commproc.c */
  664. int dpram_init (void);
  665. uint dpram_base(void);
  666. uint dpram_base_align(uint align);
  667. uint dpram_alloc(uint size);
  668. uint dpram_alloc_align(uint size,uint align);
  669. void bootcount_store (ulong);
  670. ulong bootcount_load (void);
  671. #define BOOTCOUNT_MAGIC 0xB001C041
  672. /* $(CPU)/.../<eth> */
  673. void mii_init (void);
  674. /* $(CPU)/.../lcd.c */
  675. ulong lcd_setmem (ulong);
  676. /* $(CPU)/.../video.c */
  677. ulong video_setmem (ulong);
  678. /* arch/$(ARCH)/lib/cache.c */
  679. void enable_caches(void);
  680. void flush_cache (unsigned long, unsigned long);
  681. void flush_dcache_all(void);
  682. void flush_dcache_range(unsigned long start, unsigned long stop);
  683. void invalidate_dcache_range(unsigned long start, unsigned long stop);
  684. void invalidate_dcache_all(void);
  685. void invalidate_icache_all(void);
  686. /* arch/$(ARCH)/lib/ticks.S */
  687. unsigned long long get_ticks(void);
  688. void wait_ticks (unsigned long);
  689. /* arch/$(ARCH)/lib/time.c */
  690. void __udelay (unsigned long);
  691. ulong usec2ticks (unsigned long usec);
  692. ulong ticks2usec (unsigned long ticks);
  693. int init_timebase (void);
  694. /* lib/gunzip.c */
  695. int gunzip(void *, int, unsigned char *, unsigned long *);
  696. int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
  697. int stoponerr, int offset);
  698. /* lib/qsort.c */
  699. void qsort(void *base, size_t nmemb, size_t size,
  700. int(*compar)(const void *, const void *));
  701. int strcmp_compar(const void *, const void *);
  702. /* lib/time.c */
  703. void udelay (unsigned long);
  704. void mdelay(unsigned long);
  705. /* lib/uuid.c */
  706. void uuid_str_to_bin(const char *uuid, unsigned char *out);
  707. int uuid_str_valid(const char *uuid);
  708. /* lib/vsprintf.c */
  709. #include <vsprintf.h>
  710. /* lib/strmhz.c */
  711. char * strmhz(char *buf, unsigned long hz);
  712. /* lib/crc32.c */
  713. #include <u-boot/crc.h>
  714. /* lib/rand.c */
  715. #if defined(CONFIG_RANDOM_MACADDR) || \
  716. defined(CONFIG_BOOTP_RANDOM_DELAY) || \
  717. defined(CONFIG_CMD_LINK_LOCAL)
  718. #define RAND_MAX -1U
  719. void srand(unsigned int seed);
  720. unsigned int rand(void);
  721. unsigned int rand_r(unsigned int *seedp);
  722. #endif
  723. /* common/console.c */
  724. int console_init_f(void); /* Before relocation; uses the serial stuff */
  725. int console_init_r(void); /* After relocation; uses the console stuff */
  726. int console_assign(int file, const char *devname); /* Assign the console */
  727. int ctrlc (void);
  728. int had_ctrlc (void); /* have we had a Control-C since last clear? */
  729. void clear_ctrlc (void); /* clear the Control-C condition */
  730. int disable_ctrlc (int); /* 1 to disable, 0 to enable Control-C detect */
  731. /*
  732. * STDIO based functions (can always be used)
  733. */
  734. /* serial stuff */
  735. int serial_printf (const char *fmt, ...)
  736. __attribute__ ((format (__printf__, 1, 2)));
  737. /* stdin */
  738. int getc(void);
  739. int tstc(void);
  740. /* stdout */
  741. void putc(const char c);
  742. void puts(const char *s);
  743. int printf(const char *fmt, ...)
  744. __attribute__ ((format (__printf__, 1, 2)));
  745. int vprintf(const char *fmt, va_list args);
  746. /* stderr */
  747. #define eputc(c) fputc(stderr, c)
  748. #define eputs(s) fputs(stderr, s)
  749. #define eprintf(fmt,args...) fprintf(stderr,fmt ,##args)
  750. /*
  751. * FILE based functions (can only be used AFTER relocation!)
  752. */
  753. #define stdin 0
  754. #define stdout 1
  755. #define stderr 2
  756. #define MAX_FILES 3
  757. int fprintf(int file, const char *fmt, ...)
  758. __attribute__ ((format (__printf__, 2, 3)));
  759. void fputs(int file, const char *s);
  760. void fputc(int file, const char c);
  761. int ftstc(int file);
  762. int fgetc(int file);
  763. /* lib/gzip.c */
  764. int gzip(void *dst, unsigned long *lenp,
  765. unsigned char *src, unsigned long srclen);
  766. int zzip(void *dst, unsigned long *lenp, unsigned char *src,
  767. unsigned long srclen, int stoponerr,
  768. int (*func)(unsigned long, unsigned long));
  769. /* lib/net_utils.c */
  770. #include <net.h>
  771. static inline IPaddr_t getenv_IPaddr(char *var)
  772. {
  773. return string_to_ip(getenv(var));
  774. }
  775. /*
  776. * CONSOLE multiplexing.
  777. */
  778. #ifdef CONFIG_CONSOLE_MUX
  779. #include <iomux.h>
  780. #endif
  781. int pcmcia_init (void);
  782. #ifdef CONFIG_STATUS_LED
  783. # include <status_led.h>
  784. #endif
  785. #include <bootstage.h>
  786. #ifdef CONFIG_SHOW_ACTIVITY
  787. void show_activity(int arg);
  788. #endif
  789. /* Multicore arch functions */
  790. #ifdef CONFIG_MP
  791. int cpu_status(int nr);
  792. int cpu_reset(int nr);
  793. int cpu_disable(int nr);
  794. int cpu_release(int nr, int argc, char * const argv[]);
  795. #endif
  796. /* Define a null map_sysmem() if the architecture doesn't use it */
  797. # ifndef CONFIG_ARCH_MAP_SYSMEM
  798. static inline void *map_sysmem(phys_addr_t paddr, unsigned long len)
  799. {
  800. return (void *)(uintptr_t)paddr;
  801. }
  802. static inline void unmap_sysmem(const void *vaddr)
  803. {
  804. }
  805. static inline phys_addr_t map_to_sysmem(void *ptr)
  806. {
  807. return (phys_addr_t)(uintptr_t)ptr;
  808. }
  809. # endif
  810. #endif /* __ASSEMBLY__ */
  811. #ifdef CONFIG_PPC
  812. /*
  813. * Has to be included outside of the #ifndef __ASSEMBLY__ section.
  814. * Otherwise might lead to compilation errors in assembler files.
  815. */
  816. #include <asm/cache.h>
  817. #endif
  818. /* Put only stuff here that the assembler can digest */
  819. #ifdef CONFIG_POST
  820. #define CONFIG_HAS_POST
  821. #ifndef CONFIG_POST_ALT_LIST
  822. #define CONFIG_POST_STD_LIST
  823. #endif
  824. #endif
  825. #ifdef CONFIG_INIT_CRITICAL
  826. #error CONFIG_INIT_CRITICAL is deprecated!
  827. #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
  828. #endif
  829. #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
  830. #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
  831. #define DIV_ROUND(n,d) (((n) + ((d)/2)) / (d))
  832. #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
  833. #define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
  834. #define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1)
  835. #define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask))
  836. /*
  837. * ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture. It
  838. * is used to align DMA buffers.
  839. */
  840. #ifndef __ASSEMBLY__
  841. #include <asm/cache.h>
  842. #endif
  843. /*
  844. * The ALLOC_CACHE_ALIGN_BUFFER macro is used to allocate a buffer on the
  845. * stack that meets the minimum architecture alignment requirements for DMA.
  846. * Such a buffer is useful for DMA operations where flushing and invalidating
  847. * the cache before and after a read and/or write operation is required for
  848. * correct operations.
  849. *
  850. * When called the macro creates an array on the stack that is sized such
  851. * that:
  852. *
  853. * 1) The beginning of the array can be advanced enough to be aligned.
  854. *
  855. * 2) The size of the aligned portion of the array is a multiple of the minimum
  856. * architecture alignment required for DMA.
  857. *
  858. * 3) The aligned portion contains enough space for the original number of
  859. * elements requested.
  860. *
  861. * The macro then creates a pointer to the aligned portion of this array and
  862. * assigns to the pointer the address of the first element in the aligned
  863. * portion of the array.
  864. *
  865. * Calling the macro as:
  866. *
  867. * ALLOC_CACHE_ALIGN_BUFFER(uint32_t, buffer, 1024);
  868. *
  869. * Will result in something similar to saying:
  870. *
  871. * uint32_t buffer[1024];
  872. *
  873. * The following differences exist:
  874. *
  875. * 1) The resulting buffer is guaranteed to be aligned to the value of
  876. * ARCH_DMA_MINALIGN.
  877. *
  878. * 2) The buffer variable created by the macro is a pointer to the specified
  879. * type, and NOT an array of the specified type. This can be very important
  880. * if you want the address of the buffer, which you probably do, to pass it
  881. * to the DMA hardware. The value of &buffer is different in the two cases.
  882. * In the macro case it will be the address of the pointer, not the address
  883. * of the space reserved for the buffer. However, in the second case it
  884. * would be the address of the buffer. So if you are replacing hard coded
  885. * stack buffers with this macro you need to make sure you remove the & from
  886. * the locations where you are taking the address of the buffer.
  887. *
  888. * Note that the size parameter is the number of array elements to allocate,
  889. * not the number of bytes.
  890. *
  891. * This macro can not be used outside of function scope, or for the creation
  892. * of a function scoped static buffer. It can not be used to create a cache
  893. * line aligned global buffer.
  894. */
  895. #define ALLOC_ALIGN_BUFFER(type, name, size, align) \
  896. char __##name[ROUND(size * sizeof(type), align) + (align - 1)]; \
  897. \
  898. type *name = (type *) ALIGN((uintptr_t)__##name, align)
  899. #define ALLOC_CACHE_ALIGN_BUFFER(type, name, size) \
  900. ALLOC_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
  901. /*
  902. * DEFINE_CACHE_ALIGN_BUFFER() is similar to ALLOC_CACHE_ALIGN_BUFFER, but it's
  903. * purpose is to allow allocating aligned buffers outside of function scope.
  904. * Usage of this macro shall be avoided or used with extreme care!
  905. */
  906. #define DEFINE_ALIGN_BUFFER(type, name, size, align) \
  907. static char __##name[roundup(size * sizeof(type), align)] \
  908. __attribute__((aligned(align))); \
  909. \
  910. static type *name = (type *)__##name
  911. #define DEFINE_CACHE_ALIGN_BUFFER(type, name, size) \
  912. DEFINE_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
  913. /* Pull in stuff for the build system */
  914. #ifdef DO_DEPS_ONLY
  915. # include <environment.h>
  916. #endif
  917. #endif /* __COMMON_H_ */