bfin_spi.c 6.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308
  1. /*
  2. * Driver for Blackfin On-Chip SPI device
  3. *
  4. * Copyright (c) 2005-2010 Analog Devices Inc.
  5. *
  6. * SPDX-License-Identifier: GPL-2.0+
  7. */
  8. /*#define DEBUG*/
  9. #include <common.h>
  10. #include <malloc.h>
  11. #include <spi.h>
  12. #include <asm/blackfin.h>
  13. #include <asm/clock.h>
  14. #include <asm/gpio.h>
  15. #include <asm/portmux.h>
  16. #include <asm/mach-common/bits/spi.h>
  17. struct bfin_spi_slave {
  18. struct spi_slave slave;
  19. void *mmr_base;
  20. u16 ctl, baud, flg;
  21. };
  22. #define MAKE_SPI_FUNC(mmr, off) \
  23. static inline void write_##mmr(struct bfin_spi_slave *bss, u16 val) { bfin_write16(bss->mmr_base + off, val); } \
  24. static inline u16 read_##mmr(struct bfin_spi_slave *bss) { return bfin_read16(bss->mmr_base + off); }
  25. MAKE_SPI_FUNC(SPI_CTL, 0x00)
  26. MAKE_SPI_FUNC(SPI_FLG, 0x04)
  27. MAKE_SPI_FUNC(SPI_STAT, 0x08)
  28. MAKE_SPI_FUNC(SPI_TDBR, 0x0c)
  29. MAKE_SPI_FUNC(SPI_RDBR, 0x10)
  30. MAKE_SPI_FUNC(SPI_BAUD, 0x14)
  31. #define to_bfin_spi_slave(s) container_of(s, struct bfin_spi_slave, slave)
  32. #define gpio_cs(cs) ((cs) - MAX_CTRL_CS)
  33. #ifdef CONFIG_BFIN_SPI_GPIO_CS
  34. # define is_gpio_cs(cs) ((cs) > MAX_CTRL_CS)
  35. #else
  36. # define is_gpio_cs(cs) 0
  37. #endif
  38. int spi_cs_is_valid(unsigned int bus, unsigned int cs)
  39. {
  40. if (is_gpio_cs(cs))
  41. return gpio_is_valid(gpio_cs(cs));
  42. else
  43. return (cs >= 1 && cs <= MAX_CTRL_CS);
  44. }
  45. void spi_cs_activate(struct spi_slave *slave)
  46. {
  47. struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
  48. if (is_gpio_cs(slave->cs)) {
  49. unsigned int cs = gpio_cs(slave->cs);
  50. gpio_set_value(cs, bss->flg);
  51. debug("%s: SPI_CS_GPIO:%x\n", __func__, gpio_get_value(cs));
  52. } else {
  53. write_SPI_FLG(bss,
  54. (read_SPI_FLG(bss) &
  55. ~((!bss->flg << 8) << slave->cs)) |
  56. (1 << slave->cs));
  57. debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss));
  58. }
  59. SSYNC();
  60. }
  61. void spi_cs_deactivate(struct spi_slave *slave)
  62. {
  63. struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
  64. if (is_gpio_cs(slave->cs)) {
  65. unsigned int cs = gpio_cs(slave->cs);
  66. gpio_set_value(cs, !bss->flg);
  67. debug("%s: SPI_CS_GPIO:%x\n", __func__, gpio_get_value(cs));
  68. } else {
  69. u16 flg;
  70. /* make sure we force the cs to deassert rather than let the
  71. * pin float back up. otherwise, exact timings may not be
  72. * met some of the time leading to random behavior (ugh).
  73. */
  74. flg = read_SPI_FLG(bss) | ((!bss->flg << 8) << slave->cs);
  75. write_SPI_FLG(bss, flg);
  76. SSYNC();
  77. debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss));
  78. flg &= ~(1 << slave->cs);
  79. write_SPI_FLG(bss, flg);
  80. debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss));
  81. }
  82. SSYNC();
  83. }
  84. void spi_init()
  85. {
  86. }
  87. #ifdef SPI_CTL
  88. # define SPI0_CTL SPI_CTL
  89. #endif
  90. #define SPI_PINS(n) \
  91. [n] = { 0, P_SPI##n##_SCK, P_SPI##n##_MISO, P_SPI##n##_MOSI, 0 }
  92. static unsigned short pins[][5] = {
  93. #ifdef SPI0_CTL
  94. SPI_PINS(0),
  95. #endif
  96. #ifdef SPI1_CTL
  97. SPI_PINS(1),
  98. #endif
  99. #ifdef SPI2_CTL
  100. SPI_PINS(2),
  101. #endif
  102. };
  103. #define SPI_CS_PINS(n) \
  104. [n] = { \
  105. P_SPI##n##_SSEL1, P_SPI##n##_SSEL2, P_SPI##n##_SSEL3, \
  106. P_SPI##n##_SSEL4, P_SPI##n##_SSEL5, P_SPI##n##_SSEL6, \
  107. P_SPI##n##_SSEL7, \
  108. }
  109. static const unsigned short cs_pins[][7] = {
  110. #ifdef SPI0_CTL
  111. SPI_CS_PINS(0),
  112. #endif
  113. #ifdef SPI1_CTL
  114. SPI_CS_PINS(1),
  115. #endif
  116. #ifdef SPI2_CTL
  117. SPI_CS_PINS(2),
  118. #endif
  119. };
  120. void spi_set_speed(struct spi_slave *slave, uint hz)
  121. {
  122. struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
  123. ulong clk;
  124. u32 baud;
  125. clk = get_spi_clk();
  126. /* baud should be rounded up */
  127. baud = DIV_ROUND_UP(clk, 2 * hz);
  128. if (baud < 2)
  129. baud = 2;
  130. else if (baud > (u16)-1)
  131. baud = -1;
  132. bss->baud = baud;
  133. }
  134. struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
  135. unsigned int max_hz, unsigned int mode)
  136. {
  137. struct bfin_spi_slave *bss;
  138. u32 mmr_base;
  139. if (!spi_cs_is_valid(bus, cs))
  140. return NULL;
  141. switch (bus) {
  142. #ifdef SPI0_CTL
  143. case 0:
  144. mmr_base = SPI0_CTL; break;
  145. #endif
  146. #ifdef SPI1_CTL
  147. case 1:
  148. mmr_base = SPI1_CTL; break;
  149. #endif
  150. #ifdef SPI2_CTL
  151. case 2:
  152. mmr_base = SPI2_CTL; break;
  153. #endif
  154. default:
  155. debug("%s: invalid bus %u\n", __func__, bus);
  156. return NULL;
  157. }
  158. bss = spi_alloc_slave(struct bfin_spi_slave, bus, cs);
  159. if (!bss)
  160. return NULL;
  161. bss->mmr_base = (void *)mmr_base;
  162. bss->ctl = SPE | MSTR | TDBR_CORE;
  163. if (mode & SPI_CPHA) bss->ctl |= CPHA;
  164. if (mode & SPI_CPOL) bss->ctl |= CPOL;
  165. if (mode & SPI_LSB_FIRST) bss->ctl |= LSBF;
  166. bss->flg = mode & SPI_CS_HIGH ? 1 : 0;
  167. spi_set_speed(&bss->slave, max_hz);
  168. debug("%s: bus:%i cs:%i mmr:%x ctl:%x baud:%i flg:%i\n", __func__,
  169. bus, cs, mmr_base, bss->ctl, bss->baud, bss->flg);
  170. return &bss->slave;
  171. }
  172. void spi_free_slave(struct spi_slave *slave)
  173. {
  174. struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
  175. free(bss);
  176. }
  177. int spi_claim_bus(struct spi_slave *slave)
  178. {
  179. struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
  180. debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs);
  181. if (is_gpio_cs(slave->cs)) {
  182. unsigned int cs = gpio_cs(slave->cs);
  183. gpio_request(cs, "bfin-spi");
  184. gpio_direction_output(cs, !bss->flg);
  185. pins[slave->bus][0] = P_DONTCARE;
  186. } else
  187. pins[slave->bus][0] = cs_pins[slave->bus][slave->cs - 1];
  188. peripheral_request_list(pins[slave->bus], "bfin-spi");
  189. write_SPI_CTL(bss, bss->ctl);
  190. write_SPI_BAUD(bss, bss->baud);
  191. SSYNC();
  192. return 0;
  193. }
  194. void spi_release_bus(struct spi_slave *slave)
  195. {
  196. struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
  197. debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs);
  198. peripheral_free_list(pins[slave->bus]);
  199. if (is_gpio_cs(slave->cs))
  200. gpio_free(gpio_cs(slave->cs));
  201. write_SPI_CTL(bss, 0);
  202. SSYNC();
  203. }
  204. #ifndef CONFIG_BFIN_SPI_IDLE_VAL
  205. # define CONFIG_BFIN_SPI_IDLE_VAL 0xff
  206. #endif
  207. static int spi_pio_xfer(struct bfin_spi_slave *bss, const u8 *tx, u8 *rx,
  208. uint bytes)
  209. {
  210. /* discard invalid data and clear RXS */
  211. read_SPI_RDBR(bss);
  212. /* todo: take advantage of hardware fifos */
  213. while (bytes--) {
  214. u8 value = (tx ? *tx++ : CONFIG_BFIN_SPI_IDLE_VAL);
  215. debug("%s: tx:%x ", __func__, value);
  216. write_SPI_TDBR(bss, value);
  217. SSYNC();
  218. while ((read_SPI_STAT(bss) & TXS))
  219. if (ctrlc())
  220. return -1;
  221. while (!(read_SPI_STAT(bss) & SPIF))
  222. if (ctrlc())
  223. return -1;
  224. while (!(read_SPI_STAT(bss) & RXS))
  225. if (ctrlc())
  226. return -1;
  227. value = read_SPI_RDBR(bss);
  228. if (rx)
  229. *rx++ = value;
  230. debug("rx:%x\n", value);
  231. }
  232. return 0;
  233. }
  234. int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
  235. void *din, unsigned long flags)
  236. {
  237. struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
  238. const u8 *tx = dout;
  239. u8 *rx = din;
  240. uint bytes = bitlen / 8;
  241. int ret = 0;
  242. debug("%s: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", __func__,
  243. slave->bus, slave->cs, bitlen, bytes, flags);
  244. if (bitlen == 0)
  245. goto done;
  246. /* we can only do 8 bit transfers */
  247. if (bitlen % 8) {
  248. flags |= SPI_XFER_END;
  249. goto done;
  250. }
  251. if (flags & SPI_XFER_BEGIN)
  252. spi_cs_activate(slave);
  253. ret = spi_pio_xfer(bss, tx, rx, bytes);
  254. done:
  255. if (flags & SPI_XFER_END)
  256. spi_cs_deactivate(slave);
  257. return ret;
  258. }