| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465 |
- /*
- * (C) Copyright 2010
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
- #ifndef _PPC440GP_H_
- #define _PPC440GP_H_
- #define CONFIG_SDRAM_PPC4xx_IBM_DDR /* IBM DDR controller */
- /*
- * Some SoC specific registers (not common for all 440 SoC's)
- */
- #define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
- #define SDR0_PCI0 0x0300
- #define CPC0_STRP1_PAE_MASK (0x80000000 >> 11)
- #define CPC0_STRP1_PISE_MASK (0x80000000 >> 13)
- #define CNTRL_DCR_BASE 0x0b0
- #define CPC0_SYS0 (CNTRL_DCR_BASE + 0x30) /* System configuration reg 0 */
- #define CPC0_SYS1 (CNTRL_DCR_BASE + 0x31) /* System configuration reg 1 */
- #define CPC0_STRP0 (CNTRL_DCR_BASE + 0x34) /* Power-on config reg 0 (RO) */
- #define CPC0_STRP1 (CNTRL_DCR_BASE + 0x35) /* Power-on config reg 1 (RO) */
- #define CPC0_GPIO (CNTRL_DCR_BASE + 0x38) /* GPIO config reg (440GP) */
- #define CPC0_CR0 (CNTRL_DCR_BASE + 0x3b) /* Control 0 register */
- #define CPC0_CR1 (CNTRL_DCR_BASE + 0x3a) /* Control 1 register */
- #define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */
- #define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */
- #define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */
- #define PLLSYS0_FWD_DIV_B_MASK 0x00007000 /* Forward divisor B */
- #define PLLSYS0_OPB_DIV_MASK 0x00000c00 /* OPB divisor */
- #define PLLSYS0_EPB_DIV_MASK 0x00000300 /* EPB divisor */
- #define PLLSYS0_EXTSL_MASK 0x00000080 /* PerClk feedback path */
- #define PLLSYS0_RW_MASK 0x00000060 /* ROM width */
- #define PLLSYS0_RL_MASK 0x00000010 /* ROM location */
- #define PLLSYS0_ZMII_SEL_MASK 0x0000000c /* ZMII selection */
- #define PLLSYS0_BYPASS_MASK 0x00000002 /* Bypass PLL */
- #define PLLSYS0_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
- #define PCIL0_BRDGOPT1 (PCIL0_CFGBASE + 0x0040)
- #define PCIL0_BRDGOPT2 (PCIL0_CFGBASE + 0x0044)
- #endif /* _PPC440GP_H_ */
|
