pci_auto.c 11 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386
  1. /*
  2. * arch/ppc/kernel/pci_auto.c
  3. *
  4. * PCI autoconfiguration library
  5. *
  6. * Author: Matt Porter <mporter@mvista.com>
  7. *
  8. * Copyright 2000 MontaVista Software Inc.
  9. *
  10. * This program is free software; you can redistribute it and/or modify it
  11. * under the terms of the GNU General Public License as published by the
  12. * Free Software Foundation; either version 2 of the License, or (at your
  13. * option) any later version.
  14. */
  15. #include <common.h>
  16. #ifdef CONFIG_PCI
  17. #include <pci.h>
  18. #undef DEBUG
  19. #ifdef DEBUG
  20. #define DEBUGF(x...) printf(x)
  21. #else
  22. #define DEBUGF(x...)
  23. #endif /* DEBUG */
  24. #define PCIAUTO_IDE_MODE_MASK 0x05
  25. /*
  26. *
  27. */
  28. void pciauto_region_init(struct pci_region* res)
  29. {
  30. /*
  31. * Avoid allocating PCI resources from address 0 -- this is illegal
  32. * according to PCI 2.1 and moreover, this is known to cause Linux IDE
  33. * drivers to fail. Use a reasonable starting value of 0x1000 instead.
  34. */
  35. res->bus_lower = res->bus_start ? res->bus_start : 0x1000;
  36. }
  37. void pciauto_region_align(struct pci_region *res, unsigned long size)
  38. {
  39. res->bus_lower = ((res->bus_lower - 1) | (size - 1)) + 1;
  40. }
  41. int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar)
  42. {
  43. unsigned long addr;
  44. if (!res) {
  45. DEBUGF("No resource");
  46. goto error;
  47. }
  48. addr = ((res->bus_lower - 1) | (size - 1)) + 1;
  49. if (addr - res->bus_start + size > res->size) {
  50. DEBUGF("No room in resource");
  51. goto error;
  52. }
  53. res->bus_lower = addr + size;
  54. DEBUGF("address=0x%lx", addr);
  55. *bar = addr;
  56. return 0;
  57. error:
  58. *bar = 0xffffffff;
  59. return -1;
  60. }
  61. /*
  62. *
  63. */
  64. void pciauto_setup_device(struct pci_controller *hose,
  65. pci_dev_t dev, int bars_num,
  66. struct pci_region *mem,
  67. struct pci_region *prefetch,
  68. struct pci_region *io)
  69. {
  70. unsigned int bar_value, bar_response, bar_size;
  71. unsigned int cmdstat = 0;
  72. struct pci_region *bar_res;
  73. int bar, bar_nr = 0;
  74. int found_mem64 = 0;
  75. pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
  76. cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER;
  77. for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_0 + (bars_num*4); bar += 4) {
  78. /* Tickle the BAR and get the response */
  79. pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
  80. pci_hose_read_config_dword(hose, dev, bar, &bar_response);
  81. /* If BAR is not implemented go to the next BAR */
  82. if (!bar_response)
  83. continue;
  84. found_mem64 = 0;
  85. /* Check the BAR type and set our address mask */
  86. if (bar_response & PCI_BASE_ADDRESS_SPACE) {
  87. bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK))
  88. & 0xffff) + 1;
  89. bar_res = io;
  90. DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%x, ", bar_nr, bar_size);
  91. } else {
  92. if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
  93. PCI_BASE_ADDRESS_MEM_TYPE_64)
  94. found_mem64 = 1;
  95. bar_size = ~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1;
  96. if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH))
  97. bar_res = prefetch;
  98. else
  99. bar_res = mem;
  100. DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%x, ", bar_nr, bar_size);
  101. }
  102. if (pciauto_region_allocate(bar_res, bar_size, &bar_value) == 0) {
  103. /* Write it out and update our limit */
  104. pci_hose_write_config_dword(hose, dev, bar, bar_value);
  105. /*
  106. * If we are a 64-bit decoder then increment to the
  107. * upper 32 bits of the bar and force it to locate
  108. * in the lower 4GB of memory.
  109. */
  110. if (found_mem64) {
  111. bar += 4;
  112. pci_hose_write_config_dword(hose, dev, bar, 0x00000000);
  113. }
  114. cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ?
  115. PCI_COMMAND_IO : PCI_COMMAND_MEMORY;
  116. }
  117. DEBUGF("\n");
  118. bar_nr++;
  119. }
  120. pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
  121. pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
  122. pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
  123. }
  124. static void pciauto_prescan_setup_bridge(struct pci_controller *hose,
  125. pci_dev_t dev, int sub_bus)
  126. {
  127. struct pci_region *pci_mem = hose->pci_mem;
  128. struct pci_region *pci_prefetch = hose->pci_prefetch;
  129. struct pci_region *pci_io = hose->pci_io;
  130. unsigned int cmdstat;
  131. pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
  132. /* Configure bus number registers */
  133. pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS, PCI_BUS(dev));
  134. pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS, sub_bus);
  135. pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff);
  136. if (pci_mem) {
  137. /* Round memory allocator to 1MB boundary */
  138. pciauto_region_align(pci_mem, 0x100000);
  139. /* Set up memory and I/O filter limits, assume 32-bit I/O space */
  140. pci_hose_write_config_word(hose, dev, PCI_MEMORY_BASE,
  141. (pci_mem->bus_lower & 0xfff00000) >> 16);
  142. cmdstat |= PCI_COMMAND_MEMORY;
  143. }
  144. if (pci_prefetch) {
  145. /* Round memory allocator to 1MB boundary */
  146. pciauto_region_align(pci_prefetch, 0x100000);
  147. /* Set up memory and I/O filter limits, assume 32-bit I/O space */
  148. pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
  149. (pci_prefetch->bus_lower & 0xfff00000) >> 16);
  150. cmdstat |= PCI_COMMAND_MEMORY;
  151. } else {
  152. /* We don't support prefetchable memory for now, so disable */
  153. pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000);
  154. pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x0);
  155. }
  156. if (pci_io) {
  157. /* Round I/O allocator to 4KB boundary */
  158. pciauto_region_align(pci_io, 0x1000);
  159. pci_hose_write_config_byte(hose, dev, PCI_IO_BASE,
  160. (pci_io->bus_lower & 0x0000f000) >> 8);
  161. pci_hose_write_config_word(hose, dev, PCI_IO_BASE_UPPER16,
  162. (pci_io->bus_lower & 0xffff0000) >> 16);
  163. cmdstat |= PCI_COMMAND_IO;
  164. }
  165. /* Enable memory and I/O accesses, enable bus master */
  166. pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat | PCI_COMMAND_MASTER);
  167. }
  168. static void pciauto_postscan_setup_bridge(struct pci_controller *hose,
  169. pci_dev_t dev, int sub_bus)
  170. {
  171. struct pci_region *pci_mem = hose->pci_mem;
  172. struct pci_region *pci_prefetch = hose->pci_prefetch;
  173. struct pci_region *pci_io = hose->pci_io;
  174. /* Configure bus number registers */
  175. pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, sub_bus);
  176. if (pci_mem) {
  177. /* Round memory allocator to 1MB boundary */
  178. pciauto_region_align(pci_mem, 0x100000);
  179. pci_hose_write_config_word(hose, dev, PCI_MEMORY_LIMIT,
  180. (pci_mem->bus_lower-1) >> 16);
  181. }
  182. if (pci_prefetch) {
  183. /* Round memory allocator to 1MB boundary */
  184. pciauto_region_align(pci_prefetch, 0x100000);
  185. pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT,
  186. (pci_prefetch->bus_lower-1) >> 16);
  187. }
  188. if (pci_io) {
  189. /* Round I/O allocator to 4KB boundary */
  190. pciauto_region_align(pci_io, 0x1000);
  191. pci_hose_write_config_byte(hose, dev, PCI_IO_LIMIT,
  192. ((pci_io->bus_lower-1) & 0x0000f000) >> 8);
  193. pci_hose_write_config_word(hose, dev, PCI_IO_LIMIT_UPPER16,
  194. ((pci_io->bus_lower-1) & 0xffff0000) >> 16);
  195. }
  196. }
  197. /*
  198. *
  199. */
  200. void pciauto_config_init(struct pci_controller *hose)
  201. {
  202. int i;
  203. hose->pci_io = hose->pci_mem = NULL;
  204. for (i=0; i<hose->region_count; i++) {
  205. switch(hose->regions[i].flags) {
  206. case PCI_REGION_IO:
  207. if (!hose->pci_io ||
  208. hose->pci_io->size < hose->regions[i].size)
  209. hose->pci_io = hose->regions + i;
  210. break;
  211. case PCI_REGION_MEM:
  212. if (!hose->pci_mem ||
  213. hose->pci_mem->size < hose->regions[i].size)
  214. hose->pci_mem = hose->regions + i;
  215. break;
  216. case (PCI_REGION_MEM | PCI_REGION_PREFETCH):
  217. if (!hose->pci_prefetch ||
  218. hose->pci_prefetch->size < hose->regions[i].size)
  219. hose->pci_prefetch = hose->regions + i;
  220. break;
  221. }
  222. }
  223. if (hose->pci_mem) {
  224. pciauto_region_init(hose->pci_mem);
  225. DEBUGF("PCI Autoconfig: Memory region: [%lx-%lx]\n",
  226. hose->pci_mem->bus_start,
  227. hose->pci_mem->bus_start + hose->pci_mem->size - 1);
  228. }
  229. if (hose->pci_prefetch) {
  230. pciauto_region_init(hose->pci_prefetch);
  231. DEBUGF("PCI Autoconfig: Prefetchable Memory region: [%lx-%lx]\n",
  232. hose->pci_prefetch->bus_start,
  233. hose->pci_prefetch->bus_start + hose->pci_prefetch->size - 1);
  234. }
  235. if (hose->pci_io) {
  236. pciauto_region_init(hose->pci_io);
  237. DEBUGF("PCI Autoconfig: I/O region: [%lx-%lx]\n",
  238. hose->pci_io->bus_start,
  239. hose->pci_io->bus_start + hose->pci_io->size - 1);
  240. }
  241. }
  242. /* HJF: Changed this to return int. I think this is required
  243. * to get the correct result when scanning bridges
  244. */
  245. int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
  246. {
  247. unsigned int sub_bus = PCI_BUS(dev);
  248. unsigned short class;
  249. unsigned char prg_iface;
  250. int n;
  251. pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
  252. switch(class) {
  253. case PCI_CLASS_BRIDGE_PCI:
  254. hose->current_busno++;
  255. pciauto_setup_device(hose, dev, 2, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
  256. DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_DEV(dev));
  257. /* Passing in current_busno allows for sibling P2P bridges */
  258. pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
  259. /*
  260. * need to figure out if this is a subordinate bridge on the bus
  261. * to be able to properly set the pri/sec/sub bridge registers.
  262. */
  263. n = pci_hose_scan_bus(hose, hose->current_busno);
  264. /* figure out the deepest we've gone for this leg */
  265. sub_bus = max(n, sub_bus);
  266. pciauto_postscan_setup_bridge(hose, dev, sub_bus);
  267. sub_bus = hose->current_busno;
  268. break;
  269. case PCI_CLASS_STORAGE_IDE:
  270. pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prg_iface);
  271. if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
  272. DEBUGF("PCI Autoconfig: Skipping legacy mode IDE controller\n");
  273. return sub_bus;
  274. }
  275. pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
  276. break;
  277. case PCI_CLASS_BRIDGE_CARDBUS:
  278. /* just do a minimal setup of the bridge, let the OS take care of the rest */
  279. pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
  280. DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n", PCI_DEV(dev));
  281. hose->current_busno++;
  282. break;
  283. #ifdef CONFIG_MPC5200
  284. case PCI_CLASS_BRIDGE_OTHER:
  285. DEBUGF("PCI Autoconfig: Skipping bridge device %d\n",
  286. PCI_DEV(dev));
  287. break;
  288. #endif
  289. #ifdef CONFIG_MPC834X
  290. case PCI_CLASS_BRIDGE_OTHER:
  291. /*
  292. * The host/PCI bridge 1 seems broken in 8349 - it presents
  293. * itself as 'PCI_CLASS_BRIDGE_OTHER' and appears as an _agent_
  294. * device claiming resources io/mem/irq.. we only allow for
  295. * the PIMMR window to be allocated (BAR0 - 1MB size)
  296. */
  297. DEBUGF("PCI Autoconfig: Broken bridge found, only minimal config\n");
  298. pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
  299. break;
  300. #endif
  301. default:
  302. pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
  303. break;
  304. }
  305. return sub_bus;
  306. }
  307. #endif /* CONFIG_PCI */