common.h 26 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910
  1. /*
  2. * (C) Copyright 2000-2009
  3. * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  4. *
  5. * See file CREDITS for list of people who contributed to this
  6. * project.
  7. *
  8. * This program is free software; you can redistribute it and/or
  9. * modify it under the terms of the GNU General Public License as
  10. * published by the Free Software Foundation; either version 2 of
  11. * the License, or (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program; if not, write to the Free Software
  20. * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21. * MA 02111-1307 USA
  22. */
  23. #ifndef __COMMON_H_
  24. #define __COMMON_H_ 1
  25. #undef _LINUX_CONFIG_H
  26. #define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
  27. #ifndef __ASSEMBLY__ /* put C only stuff in this section */
  28. typedef unsigned char uchar;
  29. typedef volatile unsigned long vu_long;
  30. typedef volatile unsigned short vu_short;
  31. typedef volatile unsigned char vu_char;
  32. #include <config.h>
  33. #include <asm-offsets.h>
  34. #include <linux/bitops.h>
  35. #include <linux/types.h>
  36. #include <linux/string.h>
  37. #include <asm/ptrace.h>
  38. #include <stdarg.h>
  39. #if defined(CONFIG_PCI) && (defined(CONFIG_4xx) && !defined(CONFIG_AP1000))
  40. #include <pci.h>
  41. #endif
  42. #if defined(CONFIG_8xx)
  43. #include <asm/8xx_immap.h>
  44. #if defined(CONFIG_MPC852) || defined(CONFIG_MPC852T) || \
  45. defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \
  46. defined(CONFIG_MPC859DSL) || \
  47. defined(CONFIG_MPC866) || defined(CONFIG_MPC866T) || \
  48. defined(CONFIG_MPC866P)
  49. # define CONFIG_MPC866_FAMILY 1
  50. #elif defined(CONFIG_MPC870) \
  51. || defined(CONFIG_MPC875) \
  52. || defined(CONFIG_MPC880) \
  53. || defined(CONFIG_MPC885)
  54. # define CONFIG_MPC885_FAMILY 1
  55. #endif
  56. #if defined(CONFIG_MPC860) \
  57. || defined(CONFIG_MPC860T) \
  58. || defined(CONFIG_MPC866_FAMILY) \
  59. || defined(CONFIG_MPC885_FAMILY)
  60. # define CONFIG_MPC86x 1
  61. #endif
  62. #elif defined(CONFIG_5xx)
  63. #include <asm/5xx_immap.h>
  64. #elif defined(CONFIG_MPC5xxx)
  65. #include <mpc5xxx.h>
  66. #elif defined(CONFIG_MPC512X)
  67. #include <asm/immap_512x.h>
  68. #elif defined(CONFIG_MPC8220)
  69. #include <asm/immap_8220.h>
  70. #elif defined(CONFIG_8260)
  71. #if defined(CONFIG_MPC8247) \
  72. || defined(CONFIG_MPC8248) \
  73. || defined(CONFIG_MPC8271) \
  74. || defined(CONFIG_MPC8272)
  75. #define CONFIG_MPC8272_FAMILY 1
  76. #endif
  77. #if defined(CONFIG_MPC8272_FAMILY)
  78. #define CONFIG_MPC8260 1
  79. #endif
  80. #include <asm/immap_8260.h>
  81. #endif
  82. #ifdef CONFIG_MPC86xx
  83. #include <mpc86xx.h>
  84. #include <asm/immap_86xx.h>
  85. #endif
  86. #ifdef CONFIG_MPC85xx
  87. #include <mpc85xx.h>
  88. #include <asm/immap_85xx.h>
  89. #endif
  90. #ifdef CONFIG_MPC83xx
  91. #include <mpc83xx.h>
  92. #include <asm/immap_83xx.h>
  93. #endif
  94. #ifdef CONFIG_4xx
  95. #include <asm/ppc4xx.h>
  96. #endif
  97. #ifdef CONFIG_HYMOD
  98. #include <board/hymod/hymod.h>
  99. #endif
  100. #ifdef CONFIG_ARM
  101. #define asmlinkage /* nothing */
  102. #endif
  103. #ifdef CONFIG_BLACKFIN
  104. #include <asm/blackfin.h>
  105. #endif
  106. #ifdef CONFIG_SOC_DA8XX
  107. #include <asm/arch/hardware.h>
  108. #endif
  109. #include <part.h>
  110. #include <flash.h>
  111. #include <image.h>
  112. #ifdef DEBUG
  113. #define debug(fmt,args...) printf (fmt ,##args)
  114. #define debugX(level,fmt,args...) if (DEBUG>=level) printf(fmt,##args);
  115. #else
  116. #define debug(fmt,args...)
  117. #define debugX(level,fmt,args...)
  118. #endif /* DEBUG */
  119. #ifdef DEBUG
  120. # define _DEBUG 1
  121. #else
  122. # define _DEBUG 0
  123. #endif
  124. /*
  125. * An assertion is run-time check done in debug mode only. If DEBUG is not
  126. * defined then it is skipped. If DEBUG is defined and the assertion fails,
  127. * then it calls panic*( which may or may not reset/halt U-Boot (see
  128. * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
  129. * before release, and after release it is hoped that they don't matter. But
  130. * in any case these failing assertions cannot be fixed with a reset (which
  131. * may just do the same assertion again).
  132. */
  133. void __assert_fail(const char *assertion, const char *file, unsigned line,
  134. const char *function);
  135. #define assert(x) \
  136. ({ if (!(x) && _DEBUG) \
  137. __assert_fail(#x, __FILE__, __LINE__, __func__); })
  138. #define error(fmt, args...) do { \
  139. printf("ERROR: " fmt "\nat %s:%d/%s()\n", \
  140. ##args, __FILE__, __LINE__, __func__); \
  141. } while (0)
  142. #ifndef BUG
  143. #define BUG() do { \
  144. printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
  145. panic("BUG!"); \
  146. } while (0)
  147. #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
  148. #endif /* BUG */
  149. /* Force a compilation error if condition is true */
  150. #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
  151. typedef void (interrupt_handler_t)(void *);
  152. #include <asm/u-boot.h> /* boot information for Linux kernel */
  153. #include <asm/global_data.h> /* global data used for startup functions */
  154. /*
  155. * enable common handling for all TQM8xxL/M boards:
  156. * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
  157. * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
  158. * and for the TQM885D board
  159. */
  160. #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
  161. defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
  162. defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
  163. # ifndef CONFIG_TQM8xxM
  164. # define CONFIG_TQM8xxM
  165. # endif
  166. #endif
  167. #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
  168. defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
  169. defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
  170. defined(CONFIG_TQM885D)
  171. # ifndef CONFIG_TQM8xxL
  172. # define CONFIG_TQM8xxL
  173. # endif
  174. #endif
  175. #ifndef CONFIG_SERIAL_MULTI
  176. #if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2) \
  177. || defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) \
  178. || defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
  179. #define CONFIG_SERIAL_MULTI 1
  180. #endif
  181. #endif /* CONFIG_SERIAL_MULTI */
  182. /*
  183. * General Purpose Utilities
  184. */
  185. #define min(X, Y) \
  186. ({ typeof (X) __x = (X); \
  187. typeof (Y) __y = (Y); \
  188. (__x < __y) ? __x : __y; })
  189. #define max(X, Y) \
  190. ({ typeof (X) __x = (X); \
  191. typeof (Y) __y = (Y); \
  192. (__x > __y) ? __x : __y; })
  193. #define MIN(x, y) min(x, y)
  194. #define MAX(x, y) max(x, y)
  195. #if defined(CONFIG_ENV_IS_EMBEDDED)
  196. #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
  197. #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
  198. (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
  199. defined(CONFIG_ENV_IS_IN_NVRAM)
  200. #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
  201. #else
  202. #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
  203. #endif
  204. /**
  205. * container_of - cast a member of a structure out to the containing structure
  206. * @ptr: the pointer to the member.
  207. * @type: the type of the container struct this is embedded in.
  208. * @member: the name of the member within the struct.
  209. *
  210. */
  211. #define container_of(ptr, type, member) ({ \
  212. const typeof( ((type *)0)->member ) *__mptr = (ptr); \
  213. (type *)( (char *)__mptr - offsetof(type,member) );})
  214. /*
  215. * Function Prototypes
  216. */
  217. void hang (void) __attribute__ ((noreturn));
  218. int timer_init(void);
  219. int cpu_init(void);
  220. /* */
  221. phys_size_t initdram (int);
  222. int display_options (void);
  223. void print_size(unsigned long long, const char *);
  224. int print_buffer (ulong addr, void* data, uint width, uint count, uint linelen);
  225. /* common/main.c */
  226. void main_loop (void);
  227. int run_command (const char *cmd, int flag);
  228. #ifdef CONFIG_CMD_PXE
  229. int run_command2(const char *cmd, int flag);
  230. #endif
  231. int readline (const char *const prompt);
  232. int readline_into_buffer (const char *const prompt, char * buffer);
  233. int parse_line (char *, char *[]);
  234. void init_cmd_timeout(void);
  235. void reset_cmd_timeout(void);
  236. #ifdef CONFIG_MENU
  237. int abortboot(int bootdelay);
  238. #endif
  239. /* arch/$(ARCH)/lib/board.c */
  240. void board_init_f (ulong) __attribute__ ((noreturn));
  241. void board_init_r (gd_t *, ulong) __attribute__ ((noreturn));
  242. int checkboard (void);
  243. int checkflash (void);
  244. int checkdram (void);
  245. int last_stage_init(void);
  246. extern ulong monitor_flash_len;
  247. int mac_read_from_eeprom(void);
  248. /* common/flash.c */
  249. void flash_perror (int);
  250. /* common/cmd_source.c */
  251. int source (ulong addr, const char *fit_uname);
  252. extern ulong load_addr; /* Default Load Address */
  253. /* common/cmd_doc.c */
  254. void doc_probe(unsigned long physadr);
  255. /* common/cmd_net.c */
  256. int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
  257. /* common/cmd_nvedit.c */
  258. int env_init (void);
  259. void env_relocate (void);
  260. int envmatch (uchar *, int);
  261. char *getenv (const char *);
  262. int getenv_f (const char *name, char *buf, unsigned len);
  263. ulong getenv_ulong(const char *name, int base, ulong default_val);
  264. int saveenv (void);
  265. #ifdef CONFIG_PPC /* ARM version to be fixed! */
  266. int inline setenv (const char *, const char *);
  267. #else
  268. int setenv (const char *, const char *);
  269. #endif /* CONFIG_PPC */
  270. #ifdef CONFIG_ARM
  271. # include <asm/mach-types.h>
  272. # include <asm/setup.h>
  273. # include <asm/u-boot-arm.h> /* ARM version to be fixed! */
  274. #endif /* CONFIG_ARM */
  275. #ifdef CONFIG_X86 /* x86 version to be fixed! */
  276. # include <asm/u-boot-x86.h>
  277. #endif /* CONFIG_X86 */
  278. #ifdef CONFIG_SANDBOX
  279. # include <asm/u-boot-sandbox.h> /* TODO(sjg) what needs to be fixed? */
  280. #endif
  281. #ifdef CONFIG_NDS32
  282. # include <asm/mach-types.h>
  283. # include <asm/u-boot-nds32.h>
  284. #endif /* CONFIG_NDS32 */
  285. #ifdef CONFIG_AUTO_COMPLETE
  286. int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf);
  287. #endif
  288. int get_env_id (void);
  289. void pci_init (void);
  290. void pci_init_board(void);
  291. void pciinfo (int, int);
  292. #if defined(CONFIG_PCI) && (defined(CONFIG_4xx) && !defined(CONFIG_AP1000))
  293. int pci_pre_init (struct pci_controller *);
  294. int is_pci_host (struct pci_controller *);
  295. #endif
  296. #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
  297. # if defined(CONFIG_SYS_PCI_TARGET_INIT)
  298. void pci_target_init (struct pci_controller *);
  299. # endif
  300. # if defined(CONFIG_SYS_PCI_MASTER_INIT)
  301. void pci_master_init (struct pci_controller *);
  302. # endif
  303. #if defined(CONFIG_440SPE) || \
  304. defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
  305. defined(CONFIG_405EX)
  306. void pcie_setup_hoses(int busno);
  307. #endif
  308. #endif
  309. int misc_init_f (void);
  310. int misc_init_r (void);
  311. /* common/exports.c */
  312. void jumptable_init(void);
  313. /* common/kallsysm.c */
  314. const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
  315. /* api/api.c */
  316. void api_init (void);
  317. /* common/memsize.c */
  318. long get_ram_size (long *, long);
  319. /* $(BOARD)/$(BOARD).c */
  320. void reset_phy (void);
  321. void fdc_hw_init (void);
  322. /* $(BOARD)/eeprom.c */
  323. void eeprom_init (void);
  324. #ifndef CONFIG_SPI
  325. int eeprom_probe (unsigned dev_addr, unsigned offset);
  326. #endif
  327. int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
  328. int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
  329. #ifdef CONFIG_LWMON
  330. extern uchar pic_read (uchar reg);
  331. extern void pic_write (uchar reg, uchar val);
  332. #endif
  333. /*
  334. * Set this up regardless of board
  335. * type, to prevent errors.
  336. */
  337. #if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR)
  338. # define CONFIG_SYS_DEF_EEPROM_ADDR 0
  339. #else
  340. #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
  341. # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
  342. #endif
  343. #endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */
  344. #if defined(CONFIG_SPI)
  345. extern void spi_init_f (void);
  346. extern void spi_init_r (void);
  347. extern ssize_t spi_read (uchar *, int, uchar *, int);
  348. extern ssize_t spi_write (uchar *, int, uchar *, int);
  349. #endif
  350. #ifdef CONFIG_RPXCLASSIC
  351. void rpxclassic_init (void);
  352. #endif
  353. void rpxlite_init (void);
  354. #ifdef CONFIG_MBX
  355. /* $(BOARD)/mbx8xx.c */
  356. void mbx_init (void);
  357. void board_serial_init (void);
  358. void board_ether_init (void);
  359. #endif
  360. #ifdef CONFIG_HERMES
  361. /* $(BOARD)/hermes.c */
  362. void hermes_start_lxt980 (int speed);
  363. #endif
  364. #ifdef CONFIG_EVB64260
  365. void evb64260_init(void);
  366. void debug_led(int, int);
  367. void display_mem_map(void);
  368. void perform_soft_reset(void);
  369. #endif
  370. /* $(BOARD)/$(BOARD).c */
  371. int board_early_init_f (void);
  372. int board_late_init (void);
  373. int board_postclk_init (void); /* after clocks/timebase, before env/serial */
  374. int board_early_init_r (void);
  375. void board_poweroff (void);
  376. #if defined(CONFIG_SYS_DRAM_TEST)
  377. int testdram(void);
  378. #endif /* CONFIG_SYS_DRAM_TEST */
  379. /* $(CPU)/start.S */
  380. #if defined(CONFIG_5xx) || \
  381. defined(CONFIG_8xx)
  382. uint get_immr (uint);
  383. #endif
  384. uint get_pir (void);
  385. #if defined(CONFIG_MPC5xxx)
  386. uint get_svr (void);
  387. #endif
  388. uint get_pvr (void);
  389. uint get_svr (void);
  390. uint rd_ic_cst (void);
  391. void wr_ic_cst (uint);
  392. void wr_ic_adr (uint);
  393. uint rd_dc_cst (void);
  394. void wr_dc_cst (uint);
  395. void wr_dc_adr (uint);
  396. int icache_status (void);
  397. void icache_enable (void);
  398. void icache_disable(void);
  399. int dcache_status (void);
  400. void dcache_enable (void);
  401. void dcache_disable(void);
  402. void mmu_disable(void);
  403. void relocate_code (ulong, gd_t *, ulong) __attribute__ ((noreturn));
  404. ulong get_endaddr (void);
  405. void trap_init (ulong);
  406. #if defined (CONFIG_4xx) || \
  407. defined (CONFIG_MPC5xxx) || \
  408. defined (CONFIG_74xx_7xx) || \
  409. defined (CONFIG_74x) || \
  410. defined (CONFIG_75x) || \
  411. defined (CONFIG_74xx) || \
  412. defined (CONFIG_MPC8220) || \
  413. defined (CONFIG_MPC85xx) || \
  414. defined (CONFIG_MPC86xx) || \
  415. defined (CONFIG_MPC83xx)
  416. unsigned char in8(unsigned int);
  417. void out8(unsigned int, unsigned char);
  418. unsigned short in16(unsigned int);
  419. unsigned short in16r(unsigned int);
  420. void out16(unsigned int, unsigned short value);
  421. void out16r(unsigned int, unsigned short value);
  422. unsigned long in32(unsigned int);
  423. unsigned long in32r(unsigned int);
  424. void out32(unsigned int, unsigned long value);
  425. void out32r(unsigned int, unsigned long value);
  426. void ppcDcbf(unsigned long value);
  427. void ppcDcbi(unsigned long value);
  428. void ppcSync(void);
  429. void ppcDcbz(unsigned long value);
  430. #endif
  431. #if defined (CONFIG_MICROBLAZE)
  432. unsigned short in16(unsigned int);
  433. void out16(unsigned int, unsigned short value);
  434. #endif
  435. #if defined (CONFIG_MPC83xx)
  436. void ppcDWload(unsigned int *addr, unsigned int *ret);
  437. void ppcDWstore(unsigned int *addr, unsigned int *value);
  438. void disable_addr_trans(void);
  439. void enable_addr_trans(void);
  440. #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
  441. void ddr_enable_ecc(unsigned int dram_size);
  442. #endif
  443. #endif
  444. /* $(CPU)/cpu.c */
  445. static inline int cpumask_next(int cpu, unsigned int mask)
  446. {
  447. for (cpu++; !((1 << cpu) & mask); cpu++)
  448. ;
  449. return cpu;
  450. }
  451. #define for_each_cpu(iter, cpu, num_cpus, mask) \
  452. for (iter = 0, cpu = cpumask_next(-1, mask); \
  453. iter < num_cpus; \
  454. iter++, cpu = cpumask_next(cpu, mask)) \
  455. int cpu_numcores (void);
  456. u32 cpu_mask (void);
  457. int is_core_valid (unsigned int);
  458. int probecpu (void);
  459. int checkcpu (void);
  460. int checkicache (void);
  461. int checkdcache (void);
  462. void upmconfig (unsigned int, unsigned int *, unsigned int);
  463. ulong get_tbclk (void);
  464. void reset_cpu (ulong addr);
  465. #if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
  466. void ft_cpu_setup(void *blob, bd_t *bd);
  467. #ifdef CONFIG_PCI
  468. void ft_pci_setup(void *blob, bd_t *bd);
  469. #endif
  470. #endif
  471. /* $(CPU)/serial.c */
  472. int serial_init (void);
  473. void serial_setbrg (void);
  474. void serial_putc (const char);
  475. void serial_putc_raw(const char);
  476. void serial_puts (const char *);
  477. int serial_getc (void);
  478. int serial_tstc (void);
  479. void _serial_setbrg (const int);
  480. void _serial_putc (const char, const int);
  481. void _serial_putc_raw(const char, const int);
  482. void _serial_puts (const char *, const int);
  483. int _serial_getc (const int);
  484. int _serial_tstc (const int);
  485. /* $(CPU)/speed.c */
  486. int get_clocks (void);
  487. int get_clocks_866 (void);
  488. int sdram_adjust_866 (void);
  489. int adjust_sdram_tbs_8xx (void);
  490. #if defined(CONFIG_8260)
  491. int prt_8260_clks (void);
  492. #elif defined(CONFIG_MPC5xxx)
  493. int prt_mpc5xxx_clks (void);
  494. #endif
  495. #if defined(CONFIG_MPC512X)
  496. int prt_mpc512xxx_clks (void);
  497. #endif
  498. #if defined(CONFIG_MPC8220)
  499. int prt_mpc8220_clks (void);
  500. #endif
  501. #ifdef CONFIG_4xx
  502. ulong get_OPB_freq (void);
  503. ulong get_PCI_freq (void);
  504. #endif
  505. #if defined(CONFIG_S3C24X0) || \
  506. defined(CONFIG_LH7A40X) || \
  507. defined(CONFIG_S3C6400) || \
  508. defined(CONFIG_EP93XX)
  509. ulong get_FCLK (void);
  510. ulong get_HCLK (void);
  511. ulong get_PCLK (void);
  512. ulong get_UCLK (void);
  513. #endif
  514. #if defined(CONFIG_LH7A40X)
  515. ulong get_PLLCLK (void);
  516. #endif
  517. #if defined CONFIG_INCA_IP
  518. uint incaip_get_cpuclk (void);
  519. #endif
  520. #if defined(CONFIG_IMX)
  521. ulong get_systemPLLCLK(void);
  522. ulong get_FCLK(void);
  523. ulong get_HCLK(void);
  524. ulong get_BCLK(void);
  525. ulong get_PERCLK1(void);
  526. ulong get_PERCLK2(void);
  527. ulong get_PERCLK3(void);
  528. #endif
  529. ulong get_bus_freq (ulong);
  530. int get_serial_clock(void);
  531. #if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx)
  532. ulong get_ddr_freq(ulong);
  533. #endif
  534. #if defined(CONFIG_MPC85xx)
  535. typedef MPC85xx_SYS_INFO sys_info_t;
  536. void get_sys_info ( sys_info_t * );
  537. #endif
  538. #if defined(CONFIG_MPC86xx)
  539. typedef MPC86xx_SYS_INFO sys_info_t;
  540. void get_sys_info ( sys_info_t * );
  541. static inline ulong get_ddr_freq(ulong dummy)
  542. {
  543. return get_bus_freq(dummy);
  544. }
  545. #endif
  546. #if defined(CONFIG_4xx) || defined(CONFIG_IOP480)
  547. # if defined(CONFIG_440)
  548. # if defined(CONFIG_440SPE)
  549. unsigned long determine_sysper(void);
  550. unsigned long determine_pci_clock_per(void);
  551. # endif
  552. # endif
  553. typedef PPC4xx_SYS_INFO sys_info_t;
  554. int ppc440spe_revB(void);
  555. void get_sys_info ( sys_info_t * );
  556. #endif
  557. /* $(CPU)/cpu_init.c */
  558. #if defined(CONFIG_8xx) || defined(CONFIG_8260)
  559. void cpu_init_f (volatile immap_t *immr);
  560. #endif
  561. #if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MCF52x2) ||defined(CONFIG_MPC86xx)
  562. void cpu_init_f (void);
  563. #endif
  564. int cpu_init_r (void);
  565. #if defined(CONFIG_8260)
  566. int prt_8260_rsr (void);
  567. #elif defined(CONFIG_MPC83xx)
  568. int prt_83xx_rsr (void);
  569. #endif
  570. /* $(CPU)/interrupts.c */
  571. int interrupt_init (void);
  572. void timer_interrupt (struct pt_regs *);
  573. void external_interrupt (struct pt_regs *);
  574. void irq_install_handler(int, interrupt_handler_t *, void *);
  575. void irq_free_handler (int);
  576. void reset_timer (void);
  577. ulong get_timer (ulong base);
  578. void enable_interrupts (void);
  579. int disable_interrupts (void);
  580. /* $(CPU)/.../commproc.c */
  581. int dpram_init (void);
  582. uint dpram_base(void);
  583. uint dpram_base_align(uint align);
  584. uint dpram_alloc(uint size);
  585. uint dpram_alloc_align(uint size,uint align);
  586. void bootcount_store (ulong);
  587. ulong bootcount_load (void);
  588. #define BOOTCOUNT_MAGIC 0xB001C041
  589. /* $(CPU)/.../<eth> */
  590. void mii_init (void);
  591. /* $(CPU)/.../lcd.c */
  592. ulong lcd_setmem (ulong);
  593. /* $(CPU)/.../video.c */
  594. ulong video_setmem (ulong);
  595. /* arch/$(ARCH)/lib/cache.c */
  596. void enable_caches(void);
  597. void flush_cache (unsigned long, unsigned long);
  598. void flush_dcache_all(void);
  599. void flush_dcache_range(unsigned long start, unsigned long stop);
  600. void invalidate_dcache_range(unsigned long start, unsigned long stop);
  601. void invalidate_dcache_all(void);
  602. void invalidate_icache_all(void);
  603. /* arch/$(ARCH)/lib/ticks.S */
  604. unsigned long long get_ticks(void);
  605. void wait_ticks (unsigned long);
  606. /* arch/$(ARCH)/lib/time.c */
  607. void __udelay (unsigned long);
  608. ulong usec2ticks (unsigned long usec);
  609. ulong ticks2usec (unsigned long ticks);
  610. int init_timebase (void);
  611. /* lib/gunzip.c */
  612. int gunzip(void *, int, unsigned char *, unsigned long *);
  613. int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
  614. int stoponerr, int offset);
  615. /* lib/net_utils.c */
  616. #include <net.h>
  617. static inline IPaddr_t getenv_IPaddr (char *var)
  618. {
  619. return (string_to_ip(getenv(var)));
  620. }
  621. /* lib/qsort.c */
  622. void qsort(void *base, size_t nmemb, size_t size,
  623. int(*compar)(const void *, const void *));
  624. int strcmp_compar(const void *, const void *);
  625. /* lib/time.c */
  626. void udelay (unsigned long);
  627. void mdelay(unsigned long);
  628. /* lib/uuid.c */
  629. void uuid_str_to_bin(const char *uuid, unsigned char *out);
  630. int uuid_str_valid(const char *uuid);
  631. /* lib/vsprintf.c */
  632. ulong simple_strtoul(const char *cp,char **endp,unsigned int base);
  633. int strict_strtoul(const char *cp, unsigned int base, unsigned long *res);
  634. unsigned long long simple_strtoull(const char *cp,char **endp,unsigned int base);
  635. long simple_strtol(const char *cp,char **endp,unsigned int base);
  636. void panic(const char *fmt, ...)
  637. __attribute__ ((format (__printf__, 1, 2), noreturn));
  638. int sprintf(char * buf, const char *fmt, ...)
  639. __attribute__ ((format (__printf__, 2, 3)));
  640. int vsprintf(char *buf, const char *fmt, va_list args);
  641. char *simple_itoa(ulong i);
  642. /* lib/strmhz.c */
  643. char * strmhz(char *buf, unsigned long hz);
  644. /* lib/crc32.c */
  645. #include <u-boot/crc.h>
  646. /* common/console.c */
  647. int console_init_f(void); /* Before relocation; uses the serial stuff */
  648. int console_init_r(void); /* After relocation; uses the console stuff */
  649. int console_assign(int file, const char *devname); /* Assign the console */
  650. int ctrlc (void);
  651. int had_ctrlc (void); /* have we had a Control-C since last clear? */
  652. void clear_ctrlc (void); /* clear the Control-C condition */
  653. int disable_ctrlc (int); /* 1 to disable, 0 to enable Control-C detect */
  654. /*
  655. * STDIO based functions (can always be used)
  656. */
  657. /* serial stuff */
  658. int serial_printf (const char *fmt, ...)
  659. __attribute__ ((format (__printf__, 1, 2)));
  660. /* stdin */
  661. int getc(void);
  662. int tstc(void);
  663. /* stdout */
  664. void putc(const char c);
  665. void puts(const char *s);
  666. int printf(const char *fmt, ...)
  667. __attribute__ ((format (__printf__, 1, 2)));
  668. int vprintf(const char *fmt, va_list args);
  669. /* stderr */
  670. #define eputc(c) fputc(stderr, c)
  671. #define eputs(s) fputs(stderr, s)
  672. #define eprintf(fmt,args...) fprintf(stderr,fmt ,##args)
  673. /*
  674. * FILE based functions (can only be used AFTER relocation!)
  675. */
  676. #define stdin 0
  677. #define stdout 1
  678. #define stderr 2
  679. #define MAX_FILES 3
  680. int fprintf(int file, const char *fmt, ...)
  681. __attribute__ ((format (__printf__, 2, 3)));
  682. void fputs(int file, const char *s);
  683. void fputc(int file, const char c);
  684. int ftstc(int file);
  685. int fgetc(int file);
  686. /*
  687. * CONSOLE multiplexing.
  688. */
  689. #ifdef CONFIG_CONSOLE_MUX
  690. #include <iomux.h>
  691. #endif
  692. int pcmcia_init (void);
  693. #ifdef CONFIG_STATUS_LED
  694. # include <status_led.h>
  695. #endif
  696. /*
  697. * Board-specific Platform code can reimplement show_boot_progress () if needed
  698. */
  699. void show_boot_progress(int val);
  700. /* Multicore arch functions */
  701. #ifdef CONFIG_MP
  702. int cpu_status(int nr);
  703. int cpu_reset(int nr);
  704. int cpu_disable(int nr);
  705. int cpu_release(int nr, int argc, char * const argv[]);
  706. #endif
  707. #endif /* __ASSEMBLY__ */
  708. #ifdef CONFIG_PPC
  709. /*
  710. * Has to be included outside of the #ifndef __ASSEMBLY__ section.
  711. * Otherwise might lead to compilation errors in assembler files.
  712. */
  713. #include <asm/cache.h>
  714. #endif
  715. /* Put only stuff here that the assembler can digest */
  716. #ifdef CONFIG_POST
  717. #define CONFIG_HAS_POST
  718. #ifndef CONFIG_POST_ALT_LIST
  719. #define CONFIG_POST_STD_LIST
  720. #endif
  721. #endif
  722. #ifdef CONFIG_INIT_CRITICAL
  723. #error CONFIG_INIT_CRITICAL is deprecated!
  724. #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
  725. #endif
  726. #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
  727. #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
  728. #define DIV_ROUND(n,d) (((n) + ((d)/2)) / (d))
  729. #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
  730. #define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
  731. #define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1)
  732. #define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask))
  733. /*
  734. * ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture. It
  735. * is used to align DMA buffers.
  736. */
  737. #ifndef __ASSEMBLY__
  738. #include <asm/cache.h>
  739. #endif
  740. /*
  741. * The ALLOC_CACHE_ALIGN_BUFFER macro is used to allocate a buffer on the
  742. * stack that meets the minimum architecture alignment requirements for DMA.
  743. * Such a buffer is useful for DMA operations where flushing and invalidating
  744. * the cache before and after a read and/or write operation is required for
  745. * correct operations.
  746. *
  747. * When called the macro creates an array on the stack that is sized such
  748. * that:
  749. *
  750. * 1) The beginning of the array can be advanced enough to be aligned.
  751. *
  752. * 2) The size of the aligned portion of the array is a multiple of the minimum
  753. * architecture alignment required for DMA.
  754. *
  755. * 3) The aligned portion contains enough space for the original number of
  756. * elements requested.
  757. *
  758. * The macro then creates a pointer to the aligned portion of this array and
  759. * assigns to the pointer the address of the first element in the aligned
  760. * portion of the array.
  761. *
  762. * Calling the macro as:
  763. *
  764. * ALLOC_CACHE_ALIGN_BUFFER(uint32_t, buffer, 1024);
  765. *
  766. * Will result in something similar to saying:
  767. *
  768. * uint32_t buffer[1024];
  769. *
  770. * The following differences exist:
  771. *
  772. * 1) The resulting buffer is guaranteed to be aligned to the value of
  773. * ARCH_DMA_MINALIGN.
  774. *
  775. * 2) The buffer variable created by the macro is a pointer to the specified
  776. * type, and NOT an array of the specified type. This can be very important
  777. * if you want the address of the buffer, which you probably do, to pass it
  778. * to the DMA hardware. The value of &buffer is different in the two cases.
  779. * In the macro case it will be the address of the pointer, not the address
  780. * of the space reserved for the buffer. However, in the second case it
  781. * would be the address of the buffer. So if you are replacing hard coded
  782. * stack buffers with this macro you need to make sure you remove the & from
  783. * the locations where you are taking the address of the buffer.
  784. *
  785. * Note that the size parameter is the number of array elements to allocate,
  786. * not the number of bytes.
  787. *
  788. * This macro can not be used outside of function scope, or for the creation
  789. * of a function scoped static buffer. It can not be used to create a cache
  790. * line aligned global buffer.
  791. */
  792. #define ALLOC_CACHE_ALIGN_BUFFER(type, name, size) \
  793. char __##name[ROUND(size * sizeof(type), ARCH_DMA_MINALIGN) + \
  794. ARCH_DMA_MINALIGN - 1]; \
  795. \
  796. type *name = (type *) ALIGN((uintptr_t)__##name, ARCH_DMA_MINALIGN)
  797. /* Pull in stuff for the build system */
  798. #ifdef DO_DEPS_ONLY
  799. # include <environment.h>
  800. #endif
  801. #endif /* __COMMON_H_ */