coolsoul/u-boot: 官方u-boot @ 3a61b080acee941a1b14b709b58ff9cde0b367bc

目录树: 3a61b080ac

Anatolij Gustschin 30df9f770b imx6: drop duplicated bss memset and board_init_r() call		7 年之前
..
neo	382bee57f1 env: Rename setenv() to env_set()	7 年之前
Kconfig	f20562e4c4 mx6: remove SYS_SOC from board Kconfig	9 年之前
MAINTAINERS	c5f18a0b69 MAINTAINERS/mailmap: Update my email address	9 年之前
Makefile	78506c2f86 udoo: Switch to SPL support	9 年之前
README	5b0d03b306 udoo: Add a README file	8 年之前
udoo.c	382bee57f1 env: Rename setenv() to env_set()	7 年之前
udoo_spl.c	30df9f770b imx6: drop duplicated bss memset and board_init_r() call	7 年之前

		
				README
			
				How to use U-Boot on MX6Q/DL Udoo boards
----------------------------------------

- Build U-Boot for MX6Q/DL Udoo boards:

$ make mrproper
$ make udoo_defconfig
$ make

This will generate the SPL image called SPL and the u-boot.img.

- Flash the SPL image into the SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot.img image into the SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Insert the SD card in the board, power it up and U-Boot messages should
come up.