coolsoul/u-boot: 官方u-boot @ 2d06fd839d2d0846cf6e47ecebbf646b486e5570

Мод: 2d06fd839d

Fabio Estevam 0d6a41edb5 udoo: Remove cpu type check prior to setup_sata()		7 жил өмнө
..
neo	382bee57f1 env: Rename setenv() to env_set()	7 жил өмнө
Kconfig	f20562e4c4 mx6: remove SYS_SOC from board Kconfig	9 жил өмнө
MAINTAINERS	c5f18a0b69 MAINTAINERS/mailmap: Update my email address	9 жил өмнө
Makefile	78506c2f86 udoo: Switch to SPL support	9 жил өмнө
README	5b0d03b306 udoo: Add a README file	8 жил өмнө
udoo.c	0d6a41edb5 udoo: Remove cpu type check prior to setup_sata()	7 жил өмнө
udoo_spl.c	30df9f770b imx6: drop duplicated bss memset and board_init_r() call	7 жил өмнө

		
				README
			
				How to use U-Boot on MX6Q/DL Udoo boards
----------------------------------------

- Build U-Boot for MX6Q/DL Udoo boards:

$ make mrproper
$ make udoo_defconfig
$ make

This will generate the SPL image called SPL and the u-boot.img.

- Flash the SPL image into the SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot.img image into the SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Insert the SD card in the board, power it up and U-Boot messages should
come up.