Inicio Explorar Axuda
Iniciar sesión
coolsoul
/
u-boot
1
0
Fork 0
Ficheiros Incidencias 0 Pull Requests 0 Wiki
Árbore: 2d06fd839d
Ramas Etiquetas
u-boot
/
board
/
udoo
Fabio Estevam 0d6a41edb5 udoo: Remove cpu type check prior to setup_sata() %!s(int64=7) %!d(string=hai) anos
..
neo 382bee57f1 env: Rename setenv() to env_set() %!s(int64=7) %!d(string=hai) anos
Kconfig f20562e4c4 mx6: remove SYS_SOC from board Kconfig %!s(int64=9) %!d(string=hai) anos
MAINTAINERS c5f18a0b69 MAINTAINERS/mailmap: Update my email address %!s(int64=9) %!d(string=hai) anos
Makefile 78506c2f86 udoo: Switch to SPL support %!s(int64=9) %!d(string=hai) anos
README 5b0d03b306 udoo: Add a README file %!s(int64=8) %!d(string=hai) anos
udoo.c 0d6a41edb5 udoo: Remove cpu type check prior to setup_sata() %!s(int64=7) %!d(string=hai) anos
udoo_spl.c 30df9f770b imx6: drop duplicated bss memset and board_init_r() call %!s(int64=7) %!d(string=hai) anos

README

How to use U-Boot on MX6Q/DL Udoo boards
----------------------------------------

- Build U-Boot for MX6Q/DL Udoo boards:

$ make mrproper
$ make udoo_defconfig
$ make

This will generate the SPL image called SPL and the u-boot.img.

- Flash the SPL image into the SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot.img image into the SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Insert the SD card in the board, power it up and U-Boot messages should
come up.