123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364 |
- // SPDX-License-Identifier: GPL-2.0
- /*
- * SII Semiconductor Corporation S35392A RTC driver.
- *
- * Copyright (c) 2017, General Electric Company
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
- #include <command.h>
- #include <common.h>
- #include <dm.h>
- #include <i2c.h>
- #include <linux/bitrev.h>
- #include <rtc.h>
- #define S35390A_CMD_STATUS1 0x30
- #define S35390A_CMD_STATUS2 0x31
- #define S35390A_CMD_TIME1 0x32
- #define S35390A_CMD_TIME2 0x33
- #define S35390A_CMD_INT2_REG1 0x35
- #define S35390A_BYTE_YEAR 0
- #define S35390A_BYTE_MONTH 1
- #define S35390A_BYTE_DAY 2
- #define S35390A_BYTE_WDAY 3
- #define S35390A_BYTE_HOURS 4
- #define S35390A_BYTE_MINS 5
- #define S35390A_BYTE_SECS 6
- /* flags for STATUS1 */
- #define S35390A_FLAG_POC 0x01
- #define S35390A_FLAG_BLD 0x02
- #define S35390A_FLAG_INT2 0x04
- #define S35390A_FLAG_24H 0x40
- #define S35390A_FLAG_RESET 0x80
- /*
- * If either BLD or POC is set, then the chip has lost power long enough for
- * the time value to become invalid.
- */
- #define S35390A_LOW_VOLTAGE (S35390A_FLAG_POC | S35390A_FLAG_BLD)
- /*---------------------------------------------------------------------*/
- #undef DEBUG_RTC
- #ifdef DEBUG_RTC
- #define DEBUGR(fmt, args...) printf(fmt, ##args)
- #else
- #define DEBUGR(fmt, args...)
- #endif
- /*---------------------------------------------------------------------*/
- #ifdef CONFIG_DM_RTC
- #define DEV_TYPE struct udevice
- #else
- /* Local udevice */
- struct ludevice {
- u8 chip;
- };
- #define DEV_TYPE struct ludevice
- struct ludevice dev;
- #endif
- #define msleep(a) udelay(a * 1000)
- int lowvoltage;
- static int s35392a_rtc_reset(DEV_TYPE *dev);
- static int s35392a_rtc_read(DEV_TYPE *dev, u8 reg, u8 *buf, int len)
- {
- int ret;
- #ifdef CONFIG_DM_RTC
- /* TODO: we need to tweak the chip address to reg */
- ret = dm_i2c_read(dev, 0, buf, len);
- #else
- (void)dev;
- ret = i2c_read(reg, 0, -1, buf, len);
- #endif
- return ret;
- }
- static int s35392a_rtc_write(DEV_TYPE *dev, u8 reg, u8 *buf, int len)
- {
- int ret;
- #ifdef CONFIG_DM_RTC
- /* TODO: we need to tweak the chip address to reg */
- ret = dm_i2c_write(dev, 0, buf, 1);
- #else
- (void)dev;
- ret = i2c_write(reg, 0, 0, buf, len);
- #endif
- return ret;
- }
- static int s35392a_rtc_read8(DEV_TYPE *dev, unsigned int reg)
- {
- u8 val;
- int ret;
- ret = s35392a_rtc_read(dev, reg, &val, sizeof(val));
- return ret < 0 ? ret : val;
- }
- static int s35392a_rtc_write8(DEV_TYPE *dev, unsigned int reg, int val)
- {
- int ret;
- u8 lval = val;
- ret = s35392a_rtc_write(dev, reg, &lval, sizeof(lval));
- return ret < 0 ? ret : 0;
- }
- static int validate_time(const struct rtc_time *tm)
- {
- if ((tm->tm_year < 2000) || (tm->tm_year > 2099))
- return -EINVAL;
- if ((tm->tm_mon < 1) || (tm->tm_mon > 12))
- return -EINVAL;
- if ((tm->tm_mday < 1) || (tm->tm_mday > 31))
- return -EINVAL;
- if ((tm->tm_wday < 0) || (tm->tm_wday > 6))
- return -EINVAL;
- if ((tm->tm_hour < 0) || (tm->tm_hour > 23))
- return -EINVAL;
- if ((tm->tm_min < 0) || (tm->tm_min > 59))
- return -EINVAL;
- if ((tm->tm_sec < 0) || (tm->tm_sec > 59))
- return -EINVAL;
- return 0;
- }
- void s35392a_rtc_init(DEV_TYPE *dev)
- {
- int status;
- status = s35392a_rtc_read8(dev, S35390A_CMD_STATUS1);
- if (status < 0)
- goto error;
- DEBUGR("init: S35390A_CMD_STATUS1: 0x%x\n", status);
- lowvoltage = status & S35390A_LOW_VOLTAGE ? 1 : 0;
- if (status & S35390A_FLAG_POC)
- /*
- * Do not communicate for 0.5 seconds since the power-on
- * detection circuit is in operation.
- */
- msleep(500);
- else if (!lowvoltage)
- /*
- * If both POC and BLD are unset everything is fine.
- */
- return;
- if (lowvoltage)
- printf("RTC low voltage detected\n");
- if (!s35392a_rtc_reset(dev))
- return;
- error:
- printf("Error RTC init.\n");
- }
- /* Get the current time from the RTC */
- static int s35392a_rtc_get(DEV_TYPE *dev, struct rtc_time *tm)
- {
- u8 date[7];
- int ret, i;
- if (lowvoltage) {
- DEBUGR("RTC low voltage detected\n");
- return -EINVAL;
- }
- ret = s35392a_rtc_read(dev, S35390A_CMD_TIME1, date, sizeof(date));
- if (ret < 0) {
- DEBUGR("Error reading date from RTC\n");
- return -EIO;
- }
- /* This chip returns the bits of each byte in reverse order */
- for (i = 0; i < 7; ++i)
- date[i] = bitrev8(date[i]);
- tm->tm_sec = bcd2bin(date[S35390A_BYTE_SECS]);
- tm->tm_min = bcd2bin(date[S35390A_BYTE_MINS]);
- tm->tm_hour = bcd2bin(date[S35390A_BYTE_HOURS] & ~S35390A_FLAG_24H);
- tm->tm_wday = bcd2bin(date[S35390A_BYTE_WDAY]);
- tm->tm_mday = bcd2bin(date[S35390A_BYTE_DAY]);
- tm->tm_mon = bcd2bin(date[S35390A_BYTE_MONTH]);
- tm->tm_year = bcd2bin(date[S35390A_BYTE_YEAR]) + 2000;
- DEBUGR("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
- tm->tm_hour, tm->tm_min, tm->tm_sec);
- return 0;
- }
- /* Set the RTC */
- static int s35392a_rtc_set(DEV_TYPE *dev, const struct rtc_time *tm)
- {
- int i, ret;
- int status;
- u8 date[7];
- DEBUGR("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
- tm->tm_hour, tm->tm_min, tm->tm_sec);
- ret = validate_time(tm);
- if (ret < 0)
- return -EINVAL;
- /* We support only 24h mode */
- ret = s35392a_rtc_read8(dev, S35390A_CMD_STATUS1);
- if (ret < 0)
- return -EIO;
- status = ret;
- ret = s35392a_rtc_write8(dev, S35390A_CMD_STATUS1,
- status | S35390A_FLAG_24H);
- if (ret < 0)
- return -EIO;
- date[S35390A_BYTE_YEAR] = bin2bcd(tm->tm_year - 2000);
- date[S35390A_BYTE_MONTH] = bin2bcd(tm->tm_mon);
- date[S35390A_BYTE_DAY] = bin2bcd(tm->tm_mday);
- date[S35390A_BYTE_WDAY] = bin2bcd(tm->tm_wday);
- date[S35390A_BYTE_HOURS] = bin2bcd(tm->tm_hour);
- date[S35390A_BYTE_MINS] = bin2bcd(tm->tm_min);
- date[S35390A_BYTE_SECS] = bin2bcd(tm->tm_sec);
- /* This chip expects the bits of each byte to be in reverse order */
- for (i = 0; i < 7; ++i)
- date[i] = bitrev8(date[i]);
- ret = s35392a_rtc_write(dev, S35390A_CMD_TIME1, date, sizeof(date));
- if (ret < 0) {
- DEBUGR("Error writing date to RTC\n");
- return -EIO;
- }
- /* Now we have time. Reset the low voltage status */
- lowvoltage = 0;
- return 0;
- }
- /* Reset the RTC. */
- static int s35392a_rtc_reset(DEV_TYPE *dev)
- {
- int buf;
- int ret;
- unsigned int initcount = 0;
- buf = S35390A_FLAG_RESET;
- initialize:
- ret = s35392a_rtc_write8(dev, S35390A_CMD_STATUS1, buf);
- if (ret < 0)
- return -EIO;
- ret = s35392a_rtc_read8(dev, S35390A_CMD_STATUS1);
- if (ret < 0)
- return -EIO;
- buf = ret;
- if (!lowvoltage)
- lowvoltage = buf & S35390A_LOW_VOLTAGE ? 1 : 0;
- if (buf & S35390A_LOW_VOLTAGE) {
- /* Try up to five times to reset the chip */
- if (initcount < 5) {
- ++initcount;
- goto initialize;
- } else {
- return -EIO;
- }
- }
- return 0;
- }
- #ifndef CONFIG_DM_RTC
- int rtc_get(struct rtc_time *tm)
- {
- return s35392a_rtc_get(&dev, tm);
- }
- int rtc_set(struct rtc_time *tm)
- {
- return s35392a_rtc_set(&dev, tm);
- }
- void rtc_reset(void)
- {
- s35392a_rtc_reset(&dev);
- }
- void rtc_init(void)
- {
- s35392a_rtc_init(&dev);
- }
- #else
- static int s35392a_probe(struct udevice *dev)
- {
- s35392a_rtc_init(dev);
- return 0;
- }
- static const struct rtc_ops s35392a_rtc_ops = {
- .get = s35392a_rtc_get,
- .set = s35392a_rtc_set,
- .read8 = s35392a_rtc_read8,
- .write8 = s35392a_rtc_write8,
- .reset = s35392a_rtc_reset,
- };
- static const struct udevice_id s35392a_rtc_ids[] = {
- { .compatible = "sii,s35392a-rtc" },
- { }
- };
- U_BOOT_DRIVER(s35392a_rtc) = {
- .name = "s35392a_rtc",
- .id = UCLASS_RTC,
- .probe = s35392a_probe,
- .of_match = s35392a_rtc_ids,
- .ops = &s35392a_rtc_ops,
- };
- #endif
|