cmd_errata.c 8.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287
  1. /*
  2. * Copyright 2010-2011 Freescale Semiconductor, Inc.
  3. *
  4. * SPDX-License-Identifier: GPL-2.0+
  5. */
  6. #include <common.h>
  7. #include <command.h>
  8. #include <linux/compiler.h>
  9. #include <asm/fsl_errata.h>
  10. #include <asm/processor.h>
  11. #include "fsl_corenet_serdes.h"
  12. #ifdef CONFIG_SYS_FSL_ERRATUM_A004849
  13. /*
  14. * This work-around is implemented in PBI, so just check to see if the
  15. * work-around was actually applied. To do this, we check for specific data
  16. * at specific addresses in DCSR.
  17. *
  18. * Array offsets[] contains a list of offsets within DCSR. According to the
  19. * erratum document, the value at each offset should be 2.
  20. */
  21. static void check_erratum_a4849(uint32_t svr)
  22. {
  23. void __iomem *dcsr = (void *)CONFIG_SYS_DCSRBAR + 0xb0000;
  24. unsigned int i;
  25. #if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041)
  26. static const uint8_t offsets[] = {
  27. 0x50, 0x54, 0x58, 0x90, 0x94, 0x98
  28. };
  29. #endif
  30. #ifdef CONFIG_PPC_P4080
  31. static const uint8_t offsets[] = {
  32. 0x60, 0x64, 0x68, 0x6c, 0xa0, 0xa4, 0xa8, 0xac
  33. };
  34. #endif
  35. uint32_t x108; /* The value that should be at offset 0x108 */
  36. for (i = 0; i < ARRAY_SIZE(offsets); i++) {
  37. if (in_be32(dcsr + offsets[i]) != 2) {
  38. printf("Work-around for Erratum A004849 is not enabled\n");
  39. return;
  40. }
  41. }
  42. #if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041)
  43. x108 = 0x12;
  44. #endif
  45. #ifdef CONFIG_PPC_P4080
  46. /*
  47. * For P4080, the erratum document says that the value at offset 0x108
  48. * should be 0x12 on rev2, or 0x1c on rev3.
  49. */
  50. if (SVR_MAJ(svr) == 2)
  51. x108 = 0x12;
  52. if (SVR_MAJ(svr) == 3)
  53. x108 = 0x1c;
  54. #endif
  55. if (in_be32(dcsr + 0x108) != x108) {
  56. printf("Work-around for Erratum A004849 is not enabled\n");
  57. return;
  58. }
  59. /* Everything matches, so the erratum work-around was applied */
  60. printf("Work-around for Erratum A004849 enabled\n");
  61. }
  62. #endif
  63. #ifdef CONFIG_SYS_FSL_ERRATUM_A004580
  64. /*
  65. * This work-around is implemented in PBI, so just check to see if the
  66. * work-around was actually applied. To do this, we check for specific data
  67. * at specific addresses in the SerDes register block.
  68. *
  69. * The work-around says that for each SerDes lane, write BnTTLCRy0 =
  70. * 0x1B00_0001, Register 2 = 0x0088_0000, and Register 3 = 0x4000_0000.
  71. */
  72. static void check_erratum_a4580(uint32_t svr)
  73. {
  74. const serdes_corenet_t __iomem *srds_regs =
  75. (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
  76. unsigned int lane;
  77. for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
  78. if (serdes_lane_enabled(lane)) {
  79. const struct serdes_lane __iomem *srds_lane =
  80. &srds_regs->lane[serdes_get_lane_idx(lane)];
  81. /*
  82. * Verify that the values we were supposed to write in
  83. * the PBI are actually there. Also, the lower 15
  84. * bits of res4[3] should be the same as the upper 15
  85. * bits of res4[1].
  86. */
  87. if ((in_be32(&srds_lane->ttlcr0) != 0x1b000001) ||
  88. (in_be32(&srds_lane->res4[1]) != 0x880000) ||
  89. (in_be32(&srds_lane->res4[3]) != 0x40000044)) {
  90. printf("Work-around for Erratum A004580 is "
  91. "not enabled\n");
  92. return;
  93. }
  94. }
  95. }
  96. /* Everything matches, so the erratum work-around was applied */
  97. printf("Work-around for Erratum A004580 enabled\n");
  98. }
  99. #endif
  100. static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
  101. {
  102. #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
  103. extern int enable_cpu_a011_workaround;
  104. #endif
  105. __maybe_unused u32 svr = get_svr();
  106. #if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001)
  107. if (IS_SVR_REV(svr, 1, 0)) {
  108. switch (SVR_SOC_VER(svr)) {
  109. case SVR_P1013:
  110. case SVR_P1022:
  111. puts("Work-around for Erratum SATA A001 enabled\n");
  112. }
  113. }
  114. #endif
  115. #if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8)
  116. puts("Work-around for Erratum SERDES8 enabled\n");
  117. #endif
  118. #if defined(CONFIG_SYS_P4080_ERRATUM_SERDES9)
  119. puts("Work-around for Erratum SERDES9 enabled\n");
  120. #endif
  121. #if defined(CONFIG_SYS_P4080_ERRATUM_SERDES_A005)
  122. puts("Work-around for Erratum SERDES-A005 enabled\n");
  123. #endif
  124. #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22)
  125. if (SVR_MAJ(svr) < 3)
  126. puts("Work-around for Erratum CPU22 enabled\n");
  127. #endif
  128. #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
  129. /*
  130. * NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in 3.0
  131. * also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1
  132. * The SVR has been checked by cpu_init_r().
  133. */
  134. if (enable_cpu_a011_workaround)
  135. puts("Work-around for Erratum CPU-A011 enabled\n");
  136. #endif
  137. #if defined(CONFIG_SYS_FSL_ERRATUM_CPU_A003999)
  138. puts("Work-around for Erratum CPU-A003999 enabled\n");
  139. #endif
  140. #if defined(CONFIG_SYS_FSL_ERRATUM_DDR_A003474)
  141. puts("Work-around for Erratum DDR-A003474 enabled\n");
  142. #endif
  143. #if defined(CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN)
  144. puts("Work-around for DDR MSYNC_IN Erratum enabled\n");
  145. #endif
  146. #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC111)
  147. puts("Work-around for Erratum ESDHC111 enabled\n");
  148. #endif
  149. #ifdef CONFIG_SYS_FSL_ERRATUM_A004468
  150. puts("Work-around for Erratum A004468 enabled\n");
  151. #endif
  152. #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC135)
  153. puts("Work-around for Erratum ESDHC135 enabled\n");
  154. #endif
  155. #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC13)
  156. if (SVR_MAJ(svr) < 3)
  157. puts("Work-around for Erratum ESDHC13 enabled\n");
  158. #endif
  159. #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC_A001)
  160. puts("Work-around for Erratum ESDHC-A001 enabled\n");
  161. #endif
  162. #ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002
  163. puts("Work-around for Erratum CPC-A002 enabled\n");
  164. #endif
  165. #ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A003
  166. puts("Work-around for Erratum CPC-A003 enabled\n");
  167. #endif
  168. #ifdef CONFIG_SYS_FSL_ERRATUM_ELBC_A001
  169. puts("Work-around for Erratum ELBC-A001 enabled\n");
  170. #endif
  171. #ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003
  172. puts("Work-around for Erratum DDR-A003 enabled\n");
  173. #endif
  174. #ifdef CONFIG_SYS_FSL_ERRATUM_DDR_115
  175. puts("Work-around for Erratum DDR115 enabled\n");
  176. #endif
  177. #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
  178. puts("Work-around for Erratum DDR111 enabled\n");
  179. puts("Work-around for Erratum DDR134 enabled\n");
  180. #endif
  181. #ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A002769
  182. puts("Work-around for Erratum IFC-A002769 enabled\n");
  183. #endif
  184. #ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549
  185. puts("Work-around for Erratum P1010-A003549 enabled\n");
  186. #endif
  187. #ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
  188. puts("Work-around for Erratum IFC A-003399 enabled\n");
  189. #endif
  190. #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
  191. if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0))
  192. puts("Work-around for Erratum NMG DDR120 enabled\n");
  193. #endif
  194. #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
  195. puts("Work-around for Erratum NMG_LBC103 enabled\n");
  196. #endif
  197. #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
  198. if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0))
  199. puts("Work-around for Erratum NMG ETSEC129 enabled\n");
  200. #endif
  201. #ifdef CONFIG_SYS_FSL_ERRATUM_A004510
  202. puts("Work-around for Erratum A004510 enabled\n");
  203. #endif
  204. #ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
  205. puts("Work-around for Erratum SRIO-A004034 enabled\n");
  206. #endif
  207. #ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
  208. puts("Work-around for Erratum A004934 enabled\n");
  209. #endif
  210. #ifdef CONFIG_SYS_FSL_ERRATUM_A005871
  211. if (IS_SVR_REV(svr, 1, 0))
  212. puts("Work-around for Erratum A005871 enabled\n");
  213. #endif
  214. #ifdef CONFIG_SYS_FSL_ERRATUM_A006475
  215. if (SVR_MAJ(get_svr()) == 1)
  216. puts("Work-around for Erratum A006475 enabled\n");
  217. #endif
  218. #ifdef CONFIG_SYS_FSL_ERRATUM_A006384
  219. if (SVR_MAJ(get_svr()) == 1)
  220. puts("Work-around for Erratum A006384 enabled\n");
  221. #endif
  222. #ifdef CONFIG_SYS_FSL_ERRATUM_A004849
  223. /* This work-around is implemented in PBI, so just check for it */
  224. check_erratum_a4849(svr);
  225. #endif
  226. #ifdef CONFIG_SYS_FSL_ERRATUM_A004580
  227. /* This work-around is implemented in PBI, so just check for it */
  228. check_erratum_a4580(svr);
  229. #endif
  230. #ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003
  231. puts("Work-around for Erratum PCIe-A003 enabled\n");
  232. #endif
  233. #ifdef CONFIG_SYS_FSL_ERRATUM_USB14
  234. puts("Work-around for Erratum USB14 enabled\n");
  235. #endif
  236. #ifdef CONFIG_SYS_FSL_ERRATUM_A006593
  237. puts("Work-around for Erratum A006593 enabled\n");
  238. #endif
  239. #ifdef CONFIG_SYS_FSL_ERRATUM_A006379
  240. if (has_erratum_a006379())
  241. puts("Work-around for Erratum A006379 enabled\n");
  242. #endif
  243. #ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
  244. if (IS_SVR_REV(svr, 1, 0))
  245. puts("Work-around for Erratum A003571 enabled\n");
  246. #endif
  247. #ifdef CONFIG_SYS_FSL_ERRATUM_A005812
  248. puts("Work-around for Erratum A-005812 enabled\n");
  249. #endif
  250. #ifdef CONFIG_SYS_FSL_ERRATUM_A005125
  251. puts("Work-around for Erratum A005125 enabled\n");
  252. #endif
  253. #ifdef CONFIG_SYS_FSL_ERRATUM_I2C_A004447
  254. if ((SVR_SOC_VER(svr) == SVR_8548 && IS_SVR_REV(svr, 3, 1)) ||
  255. (SVR_REV(svr) <= CONFIG_SYS_FSL_A004447_SVR_REV))
  256. puts("Work-around for Erratum I2C-A004447 enabled\n");
  257. #endif
  258. #ifdef CONFIG_SYS_FSL_ERRATUM_A006261
  259. if (has_erratum_a006261())
  260. puts("Work-around for Erratum A006261 enabled\n");
  261. #endif
  262. return 0;
  263. }
  264. U_BOOT_CMD(
  265. errata, 1, 0, do_errata,
  266. "Report errata workarounds",
  267. ""
  268. );