common.h 28 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991
  1. /*
  2. * (C) Copyright 2000-2009
  3. * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  4. *
  5. * See file CREDITS for list of people who contributed to this
  6. * project.
  7. *
  8. * This program is free software; you can redistribute it and/or
  9. * modify it under the terms of the GNU General Public License as
  10. * published by the Free Software Foundation; either version 2 of
  11. * the License, or (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program; if not, write to the Free Software
  20. * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21. * MA 02111-1307 USA
  22. */
  23. #ifndef __COMMON_H_
  24. #define __COMMON_H_ 1
  25. #undef _LINUX_CONFIG_H
  26. #define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
  27. #ifndef __ASSEMBLY__ /* put C only stuff in this section */
  28. typedef unsigned char uchar;
  29. typedef volatile unsigned long vu_long;
  30. typedef volatile unsigned short vu_short;
  31. typedef volatile unsigned char vu_char;
  32. #include <config.h>
  33. #include <asm-offsets.h>
  34. #include <linux/bitops.h>
  35. #include <linux/types.h>
  36. #include <linux/string.h>
  37. #include <linux/stringify.h>
  38. #include <asm/ptrace.h>
  39. #include <stdarg.h>
  40. #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
  41. #include <pci.h>
  42. #endif
  43. #if defined(CONFIG_8xx)
  44. #include <asm/8xx_immap.h>
  45. #if defined(CONFIG_MPC852) || defined(CONFIG_MPC852T) || \
  46. defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \
  47. defined(CONFIG_MPC859DSL) || \
  48. defined(CONFIG_MPC866) || defined(CONFIG_MPC866T) || \
  49. defined(CONFIG_MPC866P)
  50. # define CONFIG_MPC866_FAMILY 1
  51. #elif defined(CONFIG_MPC870) \
  52. || defined(CONFIG_MPC875) \
  53. || defined(CONFIG_MPC880) \
  54. || defined(CONFIG_MPC885)
  55. # define CONFIG_MPC885_FAMILY 1
  56. #endif
  57. #if defined(CONFIG_MPC860) \
  58. || defined(CONFIG_MPC860T) \
  59. || defined(CONFIG_MPC866_FAMILY) \
  60. || defined(CONFIG_MPC885_FAMILY)
  61. # define CONFIG_MPC86x 1
  62. #endif
  63. #elif defined(CONFIG_5xx)
  64. #include <asm/5xx_immap.h>
  65. #elif defined(CONFIG_MPC5xxx)
  66. #include <mpc5xxx.h>
  67. #elif defined(CONFIG_MPC512X)
  68. #include <asm/immap_512x.h>
  69. #elif defined(CONFIG_MPC8220)
  70. #include <asm/immap_8220.h>
  71. #elif defined(CONFIG_8260)
  72. #if defined(CONFIG_MPC8247) \
  73. || defined(CONFIG_MPC8248) \
  74. || defined(CONFIG_MPC8271) \
  75. || defined(CONFIG_MPC8272)
  76. #define CONFIG_MPC8272_FAMILY 1
  77. #endif
  78. #if defined(CONFIG_MPC8272_FAMILY)
  79. #define CONFIG_MPC8260 1
  80. #endif
  81. #include <asm/immap_8260.h>
  82. #endif
  83. #ifdef CONFIG_MPC86xx
  84. #include <mpc86xx.h>
  85. #include <asm/immap_86xx.h>
  86. #endif
  87. #ifdef CONFIG_MPC85xx
  88. #include <mpc85xx.h>
  89. #include <asm/immap_85xx.h>
  90. #endif
  91. #ifdef CONFIG_MPC83xx
  92. #include <mpc83xx.h>
  93. #include <asm/immap_83xx.h>
  94. #endif
  95. #ifdef CONFIG_4xx
  96. #include <asm/ppc4xx.h>
  97. #endif
  98. #ifdef CONFIG_HYMOD
  99. #include <board/hymod/hymod.h>
  100. #endif
  101. #ifdef CONFIG_ARM
  102. #define asmlinkage /* nothing */
  103. #endif
  104. #ifdef CONFIG_BLACKFIN
  105. #include <asm/blackfin.h>
  106. #endif
  107. #ifdef CONFIG_SOC_DA8XX
  108. #include <asm/arch/hardware.h>
  109. #endif
  110. #include <part.h>
  111. #include <flash.h>
  112. #include <image.h>
  113. #ifdef DEBUG
  114. #define _DEBUG 1
  115. #else
  116. #define _DEBUG 0
  117. #endif
  118. /*
  119. * Output a debug text when condition "cond" is met. The "cond" should be
  120. * computed by a preprocessor in the best case, allowing for the best
  121. * optimization.
  122. */
  123. #define debug_cond(cond, fmt, args...) \
  124. do { \
  125. if (cond) \
  126. printf(fmt, ##args); \
  127. } while (0)
  128. #define debug(fmt, args...) \
  129. debug_cond(_DEBUG, fmt, ##args)
  130. /*
  131. * An assertion is run-time check done in debug mode only. If DEBUG is not
  132. * defined then it is skipped. If DEBUG is defined and the assertion fails,
  133. * then it calls panic*( which may or may not reset/halt U-Boot (see
  134. * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
  135. * before release, and after release it is hoped that they don't matter. But
  136. * in any case these failing assertions cannot be fixed with a reset (which
  137. * may just do the same assertion again).
  138. */
  139. void __assert_fail(const char *assertion, const char *file, unsigned line,
  140. const char *function);
  141. #define assert(x) \
  142. ({ if (!(x) && _DEBUG) \
  143. __assert_fail(#x, __FILE__, __LINE__, __func__); })
  144. #define error(fmt, args...) do { \
  145. printf("ERROR: " fmt "\nat %s:%d/%s()\n", \
  146. ##args, __FILE__, __LINE__, __func__); \
  147. } while (0)
  148. #ifndef BUG
  149. #define BUG() do { \
  150. printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
  151. panic("BUG!"); \
  152. } while (0)
  153. #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
  154. #endif /* BUG */
  155. /* Force a compilation error if condition is true */
  156. #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
  157. typedef void (interrupt_handler_t)(void *);
  158. #include <asm/u-boot.h> /* boot information for Linux kernel */
  159. #include <asm/global_data.h> /* global data used for startup functions */
  160. /*
  161. * enable common handling for all TQM8xxL/M boards:
  162. * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
  163. * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
  164. * and for the TQM885D board
  165. */
  166. #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
  167. defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
  168. defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
  169. # ifndef CONFIG_TQM8xxM
  170. # define CONFIG_TQM8xxM
  171. # endif
  172. #endif
  173. #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
  174. defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
  175. defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
  176. defined(CONFIG_TQM885D)
  177. # ifndef CONFIG_TQM8xxL
  178. # define CONFIG_TQM8xxL
  179. # endif
  180. #endif
  181. /*
  182. * General Purpose Utilities
  183. */
  184. #define min(X, Y) \
  185. ({ typeof (X) __x = (X); \
  186. typeof (Y) __y = (Y); \
  187. (__x < __y) ? __x : __y; })
  188. #define max(X, Y) \
  189. ({ typeof (X) __x = (X); \
  190. typeof (Y) __y = (Y); \
  191. (__x > __y) ? __x : __y; })
  192. #define MIN(x, y) min(x, y)
  193. #define MAX(x, y) max(x, y)
  194. /*
  195. * Return the absolute value of a number.
  196. *
  197. * This handles unsigned and signed longs, ints, shorts and chars. For all
  198. * input types abs() returns a signed long.
  199. *
  200. * For 64-bit types, use abs64()
  201. */
  202. #define abs(x) ({ \
  203. long ret; \
  204. if (sizeof(x) == sizeof(long)) { \
  205. long __x = (x); \
  206. ret = (__x < 0) ? -__x : __x; \
  207. } else { \
  208. int __x = (x); \
  209. ret = (__x < 0) ? -__x : __x; \
  210. } \
  211. ret; \
  212. })
  213. #define abs64(x) ({ \
  214. s64 __x = (x); \
  215. (__x < 0) ? -__x : __x; \
  216. })
  217. #if defined(CONFIG_ENV_IS_EMBEDDED)
  218. #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
  219. #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
  220. (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
  221. defined(CONFIG_ENV_IS_IN_NVRAM)
  222. #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
  223. #else
  224. #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
  225. #endif
  226. /**
  227. * container_of - cast a member of a structure out to the containing structure
  228. * @ptr: the pointer to the member.
  229. * @type: the type of the container struct this is embedded in.
  230. * @member: the name of the member within the struct.
  231. *
  232. */
  233. #define container_of(ptr, type, member) ({ \
  234. const typeof( ((type *)0)->member ) *__mptr = (ptr); \
  235. (type *)( (char *)__mptr - offsetof(type,member) );})
  236. /*
  237. * Function Prototypes
  238. */
  239. void hang (void) __attribute__ ((noreturn));
  240. int timer_init(void);
  241. int cpu_init(void);
  242. /* */
  243. phys_size_t initdram (int);
  244. int display_options (void);
  245. void print_size(unsigned long long, const char *);
  246. int print_buffer (ulong addr, void* data, uint width, uint count, uint linelen);
  247. /* common/main.c */
  248. void main_loop (void);
  249. int run_command(const char *cmd, int flag);
  250. /**
  251. * Run a list of commands separated by ; or even \0
  252. *
  253. * Note that if 'len' is not -1, then the command does not need to be nul
  254. * terminated, Memory will be allocated for the command in that case.
  255. *
  256. * @param cmd List of commands to run, each separated bu semicolon
  257. * @param len Length of commands excluding terminator if known (-1 if not)
  258. * @param flag Execution flags (CMD_FLAG_...)
  259. * @return 0 on success, or != 0 on error.
  260. */
  261. int run_command_list(const char *cmd, int len, int flag);
  262. int readline (const char *const prompt);
  263. int readline_into_buffer(const char *const prompt, char *buffer,
  264. int timeout);
  265. int parse_line (char *, char *[]);
  266. void init_cmd_timeout(void);
  267. void reset_cmd_timeout(void);
  268. #ifdef CONFIG_MENU
  269. int abortboot(int bootdelay);
  270. #endif
  271. extern char console_buffer[];
  272. /* arch/$(ARCH)/lib/board.c */
  273. void board_init_f(ulong);
  274. void board_init_r (gd_t *, ulong) __attribute__ ((noreturn));
  275. int checkboard (void);
  276. int checkflash (void);
  277. int checkdram (void);
  278. int last_stage_init(void);
  279. extern ulong monitor_flash_len;
  280. int mac_read_from_eeprom(void);
  281. extern u8 _binary_dt_dtb_start[]; /* embedded device tree blob */
  282. int set_cpu_clk_info(void);
  283. /**
  284. * Show the DRAM size in a board-specific way
  285. *
  286. * This is used by boards to display DRAM information in their own way.
  287. *
  288. * @param size Size of DRAM (which should be displayed along with other info)
  289. */
  290. void board_show_dram(ulong size);
  291. /* common/flash.c */
  292. void flash_perror (int);
  293. /* common/cmd_source.c */
  294. int source (ulong addr, const char *fit_uname);
  295. extern ulong load_addr; /* Default Load Address */
  296. extern ulong save_addr; /* Default Save Address */
  297. extern ulong save_size; /* Default Save Size */
  298. /* common/cmd_doc.c */
  299. void doc_probe(unsigned long physadr);
  300. /* common/cmd_net.c */
  301. int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
  302. /* common/cmd_fat.c */
  303. int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
  304. /* common/cmd_ext2.c */
  305. int do_ext2load(cmd_tbl_t *, int, int, char * const []);
  306. /* common/cmd_nvedit.c */
  307. int env_init (void);
  308. void env_relocate (void);
  309. int envmatch (uchar *, int);
  310. char *getenv (const char *);
  311. int getenv_f (const char *name, char *buf, unsigned len);
  312. ulong getenv_ulong(const char *name, int base, ulong default_val);
  313. /*
  314. * Read an environment variable as a boolean
  315. * Return -1 if variable does not exist (default to true)
  316. */
  317. int getenv_yesno(const char *var);
  318. int saveenv (void);
  319. int setenv (const char *, const char *);
  320. int setenv_ulong(const char *varname, ulong value);
  321. int setenv_addr(const char *varname, const void *addr);
  322. #ifdef CONFIG_ARM
  323. # include <asm/mach-types.h>
  324. # include <asm/setup.h>
  325. # include <asm/u-boot-arm.h> /* ARM version to be fixed! */
  326. #endif /* CONFIG_ARM */
  327. #ifdef CONFIG_X86 /* x86 version to be fixed! */
  328. # include <asm/u-boot-x86.h>
  329. #endif /* CONFIG_X86 */
  330. #ifdef CONFIG_SANDBOX
  331. # include <asm/u-boot-sandbox.h> /* TODO(sjg) what needs to be fixed? */
  332. #endif
  333. #ifdef CONFIG_NDS32
  334. # include <asm/mach-types.h>
  335. # include <asm/u-boot-nds32.h>
  336. #endif /* CONFIG_NDS32 */
  337. #ifdef CONFIG_MIPS
  338. # include <asm/u-boot-mips.h>
  339. #endif /* CONFIG_MIPS */
  340. #ifdef CONFIG_AUTO_COMPLETE
  341. int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf);
  342. #endif
  343. int get_env_id (void);
  344. void pci_init (void);
  345. void pci_init_board(void);
  346. void pciinfo (int, int);
  347. #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
  348. int pci_pre_init (struct pci_controller *);
  349. int is_pci_host (struct pci_controller *);
  350. #endif
  351. #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
  352. # if defined(CONFIG_SYS_PCI_TARGET_INIT)
  353. void pci_target_init (struct pci_controller *);
  354. # endif
  355. # if defined(CONFIG_SYS_PCI_MASTER_INIT)
  356. void pci_master_init (struct pci_controller *);
  357. # endif
  358. #if defined(CONFIG_440SPE) || \
  359. defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
  360. defined(CONFIG_405EX)
  361. void pcie_setup_hoses(int busno);
  362. #endif
  363. #endif
  364. int misc_init_f (void);
  365. int misc_init_r (void);
  366. /* common/exports.c */
  367. void jumptable_init(void);
  368. /* common/kallsysm.c */
  369. const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
  370. /* api/api.c */
  371. void api_init (void);
  372. /* common/memsize.c */
  373. long get_ram_size (long *, long);
  374. /* $(BOARD)/$(BOARD).c */
  375. void reset_phy (void);
  376. void fdc_hw_init (void);
  377. /* $(BOARD)/eeprom.c */
  378. void eeprom_init (void);
  379. #ifndef CONFIG_SPI
  380. int eeprom_probe (unsigned dev_addr, unsigned offset);
  381. #endif
  382. int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
  383. int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
  384. #ifdef CONFIG_LWMON
  385. extern uchar pic_read (uchar reg);
  386. extern void pic_write (uchar reg, uchar val);
  387. #endif
  388. /*
  389. * Set this up regardless of board
  390. * type, to prevent errors.
  391. */
  392. #if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR)
  393. # define CONFIG_SYS_DEF_EEPROM_ADDR 0
  394. #else
  395. #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
  396. # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
  397. #endif
  398. #endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */
  399. #if defined(CONFIG_SPI)
  400. extern void spi_init_f (void);
  401. extern void spi_init_r (void);
  402. extern ssize_t spi_read (uchar *, int, uchar *, int);
  403. extern ssize_t spi_write (uchar *, int, uchar *, int);
  404. #endif
  405. #ifdef CONFIG_RPXCLASSIC
  406. void rpxclassic_init (void);
  407. #endif
  408. void rpxlite_init (void);
  409. #ifdef CONFIG_MBX
  410. /* $(BOARD)/mbx8xx.c */
  411. void mbx_init (void);
  412. void board_serial_init (void);
  413. void board_ether_init (void);
  414. #endif
  415. #ifdef CONFIG_HERMES
  416. /* $(BOARD)/hermes.c */
  417. void hermes_start_lxt980 (int speed);
  418. #endif
  419. #ifdef CONFIG_EVB64260
  420. void evb64260_init(void);
  421. void debug_led(int, int);
  422. void display_mem_map(void);
  423. void perform_soft_reset(void);
  424. #endif
  425. /* $(BOARD)/$(BOARD).c */
  426. int board_early_init_f (void);
  427. int board_late_init (void);
  428. int board_postclk_init (void); /* after clocks/timebase, before env/serial */
  429. int board_early_init_r (void);
  430. void board_poweroff (void);
  431. #if defined(CONFIG_SYS_DRAM_TEST)
  432. int testdram(void);
  433. #endif /* CONFIG_SYS_DRAM_TEST */
  434. /* $(CPU)/start.S */
  435. #if defined(CONFIG_5xx) || \
  436. defined(CONFIG_8xx)
  437. uint get_immr (uint);
  438. #endif
  439. uint get_pir (void);
  440. #if defined(CONFIG_MPC5xxx)
  441. uint get_svr (void);
  442. #endif
  443. uint get_pvr (void);
  444. uint get_svr (void);
  445. uint rd_ic_cst (void);
  446. void wr_ic_cst (uint);
  447. void wr_ic_adr (uint);
  448. uint rd_dc_cst (void);
  449. void wr_dc_cst (uint);
  450. void wr_dc_adr (uint);
  451. int icache_status (void);
  452. void icache_enable (void);
  453. void icache_disable(void);
  454. int dcache_status (void);
  455. void dcache_enable (void);
  456. void dcache_disable(void);
  457. void mmu_disable(void);
  458. void relocate_code (ulong, gd_t *, ulong) __attribute__ ((noreturn));
  459. ulong get_endaddr (void);
  460. void trap_init (ulong);
  461. #if defined (CONFIG_4xx) || \
  462. defined (CONFIG_MPC5xxx) || \
  463. defined (CONFIG_74xx_7xx) || \
  464. defined (CONFIG_74x) || \
  465. defined (CONFIG_75x) || \
  466. defined (CONFIG_74xx) || \
  467. defined (CONFIG_MPC8220) || \
  468. defined (CONFIG_MPC85xx) || \
  469. defined (CONFIG_MPC86xx) || \
  470. defined (CONFIG_MPC83xx)
  471. unsigned char in8(unsigned int);
  472. void out8(unsigned int, unsigned char);
  473. unsigned short in16(unsigned int);
  474. unsigned short in16r(unsigned int);
  475. void out16(unsigned int, unsigned short value);
  476. void out16r(unsigned int, unsigned short value);
  477. unsigned long in32(unsigned int);
  478. unsigned long in32r(unsigned int);
  479. void out32(unsigned int, unsigned long value);
  480. void out32r(unsigned int, unsigned long value);
  481. void ppcDcbf(unsigned long value);
  482. void ppcDcbi(unsigned long value);
  483. void ppcSync(void);
  484. void ppcDcbz(unsigned long value);
  485. #endif
  486. #if defined (CONFIG_MICROBLAZE)
  487. unsigned short in16(unsigned int);
  488. void out16(unsigned int, unsigned short value);
  489. #endif
  490. #if defined (CONFIG_MPC83xx)
  491. void ppcDWload(unsigned int *addr, unsigned int *ret);
  492. void ppcDWstore(unsigned int *addr, unsigned int *value);
  493. void disable_addr_trans(void);
  494. void enable_addr_trans(void);
  495. #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
  496. void ddr_enable_ecc(unsigned int dram_size);
  497. #endif
  498. #endif
  499. /* $(CPU)/cpu.c */
  500. static inline int cpumask_next(int cpu, unsigned int mask)
  501. {
  502. for (cpu++; !((1 << cpu) & mask); cpu++)
  503. ;
  504. return cpu;
  505. }
  506. #define for_each_cpu(iter, cpu, num_cpus, mask) \
  507. for (iter = 0, cpu = cpumask_next(-1, mask); \
  508. iter < num_cpus; \
  509. iter++, cpu = cpumask_next(cpu, mask)) \
  510. int cpu_numcores (void);
  511. u32 cpu_mask (void);
  512. int is_core_valid (unsigned int);
  513. int probecpu (void);
  514. int checkcpu (void);
  515. int checkicache (void);
  516. int checkdcache (void);
  517. void upmconfig (unsigned int, unsigned int *, unsigned int);
  518. ulong get_tbclk (void);
  519. void reset_cpu (ulong addr);
  520. #if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
  521. void ft_cpu_setup(void *blob, bd_t *bd);
  522. #ifdef CONFIG_PCI
  523. void ft_pci_setup(void *blob, bd_t *bd);
  524. #endif
  525. #endif
  526. /* $(CPU)/serial.c */
  527. int serial_init (void);
  528. void serial_setbrg (void);
  529. void serial_putc (const char);
  530. void serial_putc_raw(const char);
  531. void serial_puts (const char *);
  532. int serial_getc (void);
  533. int serial_tstc (void);
  534. void _serial_setbrg (const int);
  535. void _serial_putc (const char, const int);
  536. void _serial_putc_raw(const char, const int);
  537. void _serial_puts (const char *, const int);
  538. int _serial_getc (const int);
  539. int _serial_tstc (const int);
  540. /* $(CPU)/speed.c */
  541. int get_clocks (void);
  542. int get_clocks_866 (void);
  543. int sdram_adjust_866 (void);
  544. int adjust_sdram_tbs_8xx (void);
  545. #if defined(CONFIG_8260)
  546. int prt_8260_clks (void);
  547. #elif defined(CONFIG_MPC5xxx)
  548. int prt_mpc5xxx_clks (void);
  549. #endif
  550. #if defined(CONFIG_MPC512X)
  551. int prt_mpc512xxx_clks (void);
  552. #endif
  553. #if defined(CONFIG_MPC8220)
  554. int prt_mpc8220_clks (void);
  555. #endif
  556. #ifdef CONFIG_4xx
  557. ulong get_OPB_freq (void);
  558. ulong get_PCI_freq (void);
  559. #endif
  560. #if defined(CONFIG_S3C24X0) || \
  561. defined(CONFIG_LH7A40X) || \
  562. defined(CONFIG_S3C6400) || \
  563. defined(CONFIG_EP93XX)
  564. ulong get_FCLK (void);
  565. ulong get_HCLK (void);
  566. ulong get_PCLK (void);
  567. ulong get_UCLK (void);
  568. #endif
  569. #if defined(CONFIG_LH7A40X)
  570. ulong get_PLLCLK (void);
  571. #endif
  572. #if defined CONFIG_INCA_IP
  573. uint incaip_get_cpuclk (void);
  574. #endif
  575. #if defined(CONFIG_IMX)
  576. ulong get_systemPLLCLK(void);
  577. ulong get_FCLK(void);
  578. ulong get_HCLK(void);
  579. ulong get_BCLK(void);
  580. ulong get_PERCLK1(void);
  581. ulong get_PERCLK2(void);
  582. ulong get_PERCLK3(void);
  583. #endif
  584. ulong get_bus_freq (ulong);
  585. int get_serial_clock(void);
  586. #if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx)
  587. ulong get_ddr_freq(ulong);
  588. #endif
  589. #if defined(CONFIG_MPC85xx)
  590. typedef MPC85xx_SYS_INFO sys_info_t;
  591. void get_sys_info ( sys_info_t * );
  592. #endif
  593. #if defined(CONFIG_MPC86xx)
  594. typedef MPC86xx_SYS_INFO sys_info_t;
  595. void get_sys_info ( sys_info_t * );
  596. static inline ulong get_ddr_freq(ulong dummy)
  597. {
  598. return get_bus_freq(dummy);
  599. }
  600. #endif
  601. #if defined(CONFIG_4xx)
  602. # if defined(CONFIG_440)
  603. # if defined(CONFIG_440SPE)
  604. unsigned long determine_sysper(void);
  605. unsigned long determine_pci_clock_per(void);
  606. # endif
  607. # endif
  608. typedef PPC4xx_SYS_INFO sys_info_t;
  609. int ppc440spe_revB(void);
  610. void get_sys_info ( sys_info_t * );
  611. #endif
  612. /* $(CPU)/cpu_init.c */
  613. #if defined(CONFIG_8xx) || defined(CONFIG_8260)
  614. void cpu_init_f (volatile immap_t *immr);
  615. #endif
  616. #if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MCF52x2) ||defined(CONFIG_MPC86xx)
  617. void cpu_init_f (void);
  618. #endif
  619. int cpu_init_r (void);
  620. #if defined(CONFIG_8260)
  621. int prt_8260_rsr (void);
  622. #elif defined(CONFIG_MPC83xx)
  623. int prt_83xx_rsr (void);
  624. #endif
  625. /* $(CPU)/interrupts.c */
  626. int interrupt_init (void);
  627. void timer_interrupt (struct pt_regs *);
  628. void external_interrupt (struct pt_regs *);
  629. void irq_install_handler(int, interrupt_handler_t *, void *);
  630. void irq_free_handler (int);
  631. void reset_timer (void);
  632. ulong get_timer (ulong base);
  633. void enable_interrupts (void);
  634. int disable_interrupts (void);
  635. /* $(CPU)/.../commproc.c */
  636. int dpram_init (void);
  637. uint dpram_base(void);
  638. uint dpram_base_align(uint align);
  639. uint dpram_alloc(uint size);
  640. uint dpram_alloc_align(uint size,uint align);
  641. void bootcount_store (ulong);
  642. ulong bootcount_load (void);
  643. #define BOOTCOUNT_MAGIC 0xB001C041
  644. /* $(CPU)/.../<eth> */
  645. void mii_init (void);
  646. /* $(CPU)/.../lcd.c */
  647. ulong lcd_setmem (ulong);
  648. /* $(CPU)/.../video.c */
  649. ulong video_setmem (ulong);
  650. /* arch/$(ARCH)/lib/cache.c */
  651. void enable_caches(void);
  652. void flush_cache (unsigned long, unsigned long);
  653. void flush_dcache_all(void);
  654. void flush_dcache_range(unsigned long start, unsigned long stop);
  655. void invalidate_dcache_range(unsigned long start, unsigned long stop);
  656. void invalidate_dcache_all(void);
  657. void invalidate_icache_all(void);
  658. /* arch/$(ARCH)/lib/ticks.S */
  659. unsigned long long get_ticks(void);
  660. void wait_ticks (unsigned long);
  661. /* arch/$(ARCH)/lib/time.c */
  662. void __udelay (unsigned long);
  663. ulong usec2ticks (unsigned long usec);
  664. ulong ticks2usec (unsigned long ticks);
  665. int init_timebase (void);
  666. /* lib/gunzip.c */
  667. int gunzip(void *, int, unsigned char *, unsigned long *);
  668. int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
  669. int stoponerr, int offset);
  670. /* lib/qsort.c */
  671. void qsort(void *base, size_t nmemb, size_t size,
  672. int(*compar)(const void *, const void *));
  673. int strcmp_compar(const void *, const void *);
  674. /* lib/time.c */
  675. void udelay (unsigned long);
  676. void mdelay(unsigned long);
  677. /* lib/uuid.c */
  678. void uuid_str_to_bin(const char *uuid, unsigned char *out);
  679. int uuid_str_valid(const char *uuid);
  680. /* lib/vsprintf.c */
  681. #include <vsprintf.h>
  682. /* lib/strmhz.c */
  683. char * strmhz(char *buf, unsigned long hz);
  684. /* lib/crc32.c */
  685. #include <u-boot/crc.h>
  686. /* lib/rand.c */
  687. #if defined(CONFIG_RANDOM_MACADDR) || \
  688. defined(CONFIG_BOOTP_RANDOM_DELAY) || \
  689. defined(CONFIG_CMD_LINK_LOCAL)
  690. #define RAND_MAX -1U
  691. void srand(unsigned int seed);
  692. unsigned int rand(void);
  693. unsigned int rand_r(unsigned int *seedp);
  694. #endif
  695. /* common/console.c */
  696. int console_init_f(void); /* Before relocation; uses the serial stuff */
  697. int console_init_r(void); /* After relocation; uses the console stuff */
  698. int console_assign(int file, const char *devname); /* Assign the console */
  699. int ctrlc (void);
  700. int had_ctrlc (void); /* have we had a Control-C since last clear? */
  701. void clear_ctrlc (void); /* clear the Control-C condition */
  702. int disable_ctrlc (int); /* 1 to disable, 0 to enable Control-C detect */
  703. /*
  704. * STDIO based functions (can always be used)
  705. */
  706. /* serial stuff */
  707. int serial_printf (const char *fmt, ...)
  708. __attribute__ ((format (__printf__, 1, 2)));
  709. /* stdin */
  710. int getc(void);
  711. int tstc(void);
  712. /* stdout */
  713. void putc(const char c);
  714. void puts(const char *s);
  715. int printf(const char *fmt, ...)
  716. __attribute__ ((format (__printf__, 1, 2)));
  717. int vprintf(const char *fmt, va_list args);
  718. /* stderr */
  719. #define eputc(c) fputc(stderr, c)
  720. #define eputs(s) fputs(stderr, s)
  721. #define eprintf(fmt,args...) fprintf(stderr,fmt ,##args)
  722. /*
  723. * FILE based functions (can only be used AFTER relocation!)
  724. */
  725. #define stdin 0
  726. #define stdout 1
  727. #define stderr 2
  728. #define MAX_FILES 3
  729. int fprintf(int file, const char *fmt, ...)
  730. __attribute__ ((format (__printf__, 2, 3)));
  731. void fputs(int file, const char *s);
  732. void fputc(int file, const char c);
  733. int ftstc(int file);
  734. int fgetc(int file);
  735. /* lib/gzip.c */
  736. int gzip(void *dst, unsigned long *lenp,
  737. unsigned char *src, unsigned long srclen);
  738. int zzip(void *dst, unsigned long *lenp, unsigned char *src,
  739. unsigned long srclen, int stoponerr,
  740. int (*func)(unsigned long, unsigned long));
  741. /* lib/net_utils.c */
  742. #include <net.h>
  743. static inline IPaddr_t getenv_IPaddr(char *var)
  744. {
  745. return string_to_ip(getenv(var));
  746. }
  747. /*
  748. * CONSOLE multiplexing.
  749. */
  750. #ifdef CONFIG_CONSOLE_MUX
  751. #include <iomux.h>
  752. #endif
  753. int pcmcia_init (void);
  754. #ifdef CONFIG_STATUS_LED
  755. # include <status_led.h>
  756. #endif
  757. #include <bootstage.h>
  758. #ifdef CONFIG_SHOW_ACTIVITY
  759. void show_activity(int arg);
  760. #endif
  761. /* Multicore arch functions */
  762. #ifdef CONFIG_MP
  763. int cpu_status(int nr);
  764. int cpu_reset(int nr);
  765. int cpu_disable(int nr);
  766. int cpu_release(int nr, int argc, char * const argv[]);
  767. #endif
  768. #endif /* __ASSEMBLY__ */
  769. #ifdef CONFIG_PPC
  770. /*
  771. * Has to be included outside of the #ifndef __ASSEMBLY__ section.
  772. * Otherwise might lead to compilation errors in assembler files.
  773. */
  774. #include <asm/cache.h>
  775. #endif
  776. /* Put only stuff here that the assembler can digest */
  777. #ifdef CONFIG_POST
  778. #define CONFIG_HAS_POST
  779. #ifndef CONFIG_POST_ALT_LIST
  780. #define CONFIG_POST_STD_LIST
  781. #endif
  782. #endif
  783. #ifdef CONFIG_INIT_CRITICAL
  784. #error CONFIG_INIT_CRITICAL is deprecated!
  785. #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
  786. #endif
  787. #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
  788. #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
  789. #define DIV_ROUND(n,d) (((n) + ((d)/2)) / (d))
  790. #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
  791. #define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
  792. #define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1)
  793. #define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask))
  794. /*
  795. * ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture. It
  796. * is used to align DMA buffers.
  797. */
  798. #ifndef __ASSEMBLY__
  799. #include <asm/cache.h>
  800. #endif
  801. /*
  802. * The ALLOC_CACHE_ALIGN_BUFFER macro is used to allocate a buffer on the
  803. * stack that meets the minimum architecture alignment requirements for DMA.
  804. * Such a buffer is useful for DMA operations where flushing and invalidating
  805. * the cache before and after a read and/or write operation is required for
  806. * correct operations.
  807. *
  808. * When called the macro creates an array on the stack that is sized such
  809. * that:
  810. *
  811. * 1) The beginning of the array can be advanced enough to be aligned.
  812. *
  813. * 2) The size of the aligned portion of the array is a multiple of the minimum
  814. * architecture alignment required for DMA.
  815. *
  816. * 3) The aligned portion contains enough space for the original number of
  817. * elements requested.
  818. *
  819. * The macro then creates a pointer to the aligned portion of this array and
  820. * assigns to the pointer the address of the first element in the aligned
  821. * portion of the array.
  822. *
  823. * Calling the macro as:
  824. *
  825. * ALLOC_CACHE_ALIGN_BUFFER(uint32_t, buffer, 1024);
  826. *
  827. * Will result in something similar to saying:
  828. *
  829. * uint32_t buffer[1024];
  830. *
  831. * The following differences exist:
  832. *
  833. * 1) The resulting buffer is guaranteed to be aligned to the value of
  834. * ARCH_DMA_MINALIGN.
  835. *
  836. * 2) The buffer variable created by the macro is a pointer to the specified
  837. * type, and NOT an array of the specified type. This can be very important
  838. * if you want the address of the buffer, which you probably do, to pass it
  839. * to the DMA hardware. The value of &buffer is different in the two cases.
  840. * In the macro case it will be the address of the pointer, not the address
  841. * of the space reserved for the buffer. However, in the second case it
  842. * would be the address of the buffer. So if you are replacing hard coded
  843. * stack buffers with this macro you need to make sure you remove the & from
  844. * the locations where you are taking the address of the buffer.
  845. *
  846. * Note that the size parameter is the number of array elements to allocate,
  847. * not the number of bytes.
  848. *
  849. * This macro can not be used outside of function scope, or for the creation
  850. * of a function scoped static buffer. It can not be used to create a cache
  851. * line aligned global buffer.
  852. */
  853. #define ALLOC_ALIGN_BUFFER(type, name, size, align) \
  854. char __##name[ROUND(size * sizeof(type), align) + (align - 1)]; \
  855. \
  856. type *name = (type *) ALIGN((uintptr_t)__##name, align)
  857. #define ALLOC_CACHE_ALIGN_BUFFER(type, name, size) \
  858. ALLOC_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
  859. /*
  860. * DEFINE_CACHE_ALIGN_BUFFER() is similar to ALLOC_CACHE_ALIGN_BUFFER, but it's
  861. * purpose is to allow allocating aligned buffers outside of function scope.
  862. * Usage of this macro shall be avoided or used with extreme care!
  863. */
  864. #define DEFINE_ALIGN_BUFFER(type, name, size, align) \
  865. static char __##name[roundup(size * sizeof(type), align)] \
  866. __attribute__((aligned(align))); \
  867. \
  868. static type *name = (type *)__##name
  869. #define DEFINE_CACHE_ALIGN_BUFFER(type, name, size) \
  870. DEFINE_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
  871. /* Pull in stuff for the build system */
  872. #ifdef DO_DEPS_ONLY
  873. # include <environment.h>
  874. #endif
  875. #endif /* __COMMON_H_ */