Domovská stránka Prehľadávať Pomoc
Prihlásiť sa
coolsoul
/
u-boot
1
0
Fork 0
Súbory Issues 0 Pull requesty 0 Wiki
Strom: 0acdb2cc8a
Branche Tagy
u-boot
/
board
/
solidrun
/
mx6cuboxi
Jon Nettleton 19ed6063a5 mx6cuboxi: Use mmc_get_op_cond() to check for an eMMC 7 rokov pred
..
Kconfig f20562e4c4 mx6: remove SYS_SOC from board Kconfig 9 rokov pred
MAINTAINERS c5f18a0b69 MAINTAINERS/mailmap: Update my email address 9 rokov pred
Makefile 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 7 rokov pred
README a187559e3d Use correct spelling of "U-Boot" 9 rokov pred
mx6cuboxi.c 19ed6063a5 mx6cuboxi: Use mmc_get_op_cond() to check for an eMMC 6 rokov pred

README

How to use U-Boot on Solid-run mx6 Hummingboard and Cubox-i
-----------------------------------------------------------

- Build U-Boot for Hummingboard/Cubox-i:

$ make mrproper
$ make mx6cuboxi_defconfig
$ make

This will generate the SPL image called SPL and the u-boot.img.

- Flash the SPL image into the SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot.img image into the SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Insert the SD card in the board, power it up and U-Boot messages should
come up.