 Vignesh R
|
a6f56ad1ee
spi: ti_qspi: dra7xx: Add support to use 76.8MHz clock
|
%!s(int64=9) %!d(string=hai) anos |
|
Vignesh R
|
fee3b6af90
spi: ti_qspi: Remove delay in read path for dra7xx
|
%!s(int64=9) %!d(string=hai) anos |
|
Vignesh R
|
c595a28530
spi: ti_qspi: Fix compiler warning when DEBUG macro is set
|
%!s(int64=9) %!d(string=hai) anos |
|
Vignesh R
|
69eeefaa06
spi: ti_qspi: Fix failure on multiple READ_ID cmd
|
%!s(int64=9) %!d(string=hai) anos |
 Praneeth Bajjuri
|
8dfd6e2129
driver: qspi: correct QSPI disable CS reset value
|
%!s(int64=9) %!d(string=hai) anos |
 Lokesh Vutla
|
e6601df8ac
dm: ti_qspi: Fix conversion of address to a pointer
|
%!s(int64=9) %!d(string=hai) anos |
 Mugunthan V N
|
518b0afc33
spi: ti_qspi: compile out spi_flash_copy_mmap when CONFIG_DMA is defined
|
%!s(int64=9) %!d(string=hai) anos |
|
Vignesh R
|
74d49bfde3
spi: ti_qspi: Use 4-byte opcode for mmap read
|
%!s(int64=9) %!d(string=hai) anos |
|
Mugunthan V N
|
106f813907
drivers: spi: ti_qspi: convert driver to adopt device driver model
|
%!s(int64=9) %!d(string=hai) anos |
|
Mugunthan V N
|
223091443c
drivers: spi: ti_qspi: prepare driver for DM conversion
|
%!s(int64=9) %!d(string=hai) anos |
|
Mugunthan V N
|
9c42558afb
drivers: spi:ti_qspi: change ti_qspi_slave to ti_qspi_priv for driver model conversion
|
%!s(int64=9) %!d(string=hai) anos |
|
Mugunthan V N
|
ec712f490d
drivers: spi: ti_qspi: do not hard code chip select for memory map configuration
|
%!s(int64=9) %!d(string=hai) anos |
 Jagan Teki
|
91292e0bee
spi: Rename op_mode_rx to mode_rx
|
%!s(int64=9) %!d(string=hai) anos |
|
Jagan Teki
|
e5961f0706
spi: Rename SPI_OPM_RX_* to SPI_RX_*
|
%!s(int64=9) %!d(string=hai) anos |
|
Jagan Teki
|
cd337da21e
spi: ti_qspi: Fix SPI_3WIRE checking using mode
|
%!s(int64=9) %!d(string=hai) anos |
|
Vignesh R
|
857db48e5f
spi: ti_qspi: Add dummy readl for bus sync
|
%!s(int64=9) %!d(string=hai) anos |
|
Jagan Teki
|
847720c4e1
spi: ti_qspi: Use BIT macro
|
%!s(int64=9) %!d(string=hai) anos |
|
Vignesh R
|
8ddd9c485f
spi: ti_qspi: Use DMA to read from qspi flash
|
%!s(int64=9) %!d(string=hai) anos |
 vishalm@ti.com
|
a39cfe717c
ti: qspi: set flash quad bit based on quad support flag
|
%!s(int64=9) %!d(string=hai) anos |
 Ravi Babu
|
46122960f0
qspi: dra7x: enable quad mode read for ti-qspi driver
|
%!s(int64=10) %!d(string=hai) anos |
 Felipe Balbi
|
d11ac4b56d
arm: omap: add support for am57xx devices
|
%!s(int64=10) %!d(string=hai) anos |
 Sourav Poddar
|
ce3cc8ecf5
ti: qspi: populate slave device to set flash quad bit.
|
%!s(int64=11) %!d(string=hai) anos |
|
Poddar, Sourav
|
b545a98f5d
spi: ti_qspi: Add delay for successful bulk erase.
|
%!s(int64=11) %!d(string=hai) anos |
|
Sourav Poddar
|
bb7cd0ddf9
spi: ti_qspi: Add delay before xfer for am43xx
|
%!s(int64=11) %!d(string=hai) anos |
|
Sourav Poddar
|
570533b820
spi: ti_qspi: Add AM43xx specifics changes
|
%!s(int64=11) %!d(string=hai) anos |
 Matt Porter
|
1d0933eaf9
spi: add TI QSPI driver
|
%!s(int64=11) %!d(string=hai) anos |
