 Tom Rini
|
83d290c56f
SPDX: Convert all of our single license tags to Linux Kernel style
|
%!s(int64=7) %!d(string=hai) anos |
 Dinh Nguyen
|
622597dee4
i2c: designware: add reset ctrl to driver
|
%!s(int64=7) %!d(string=hai) anos |
 Marek Vasut
|
014e47f028
i2c: designware: Allow sending restart conditions
|
%!s(int64=7) %!d(string=hai) anos |
 Simon Glass
|
a821c4af79
dm: Rename dev_addr..() functions
|
%!s(int64=8) %!d(string=hai) anos |
|
Marek Vasut
|
b03380805b
i2c: designware: Avoid overwriting the cmd_data register
|
%!s(int64=8) %!d(string=hai) anos |
 Stefan Roese
|
b6a77b0ce8
i2c: designware_i2c: Optionally check enable status register
|
%!s(int64=9) %!d(string=hai) anos |
|
Stefan Roese
|
ba5da550ae
i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)
|
%!s(int64=9) %!d(string=hai) anos |
|
Stefan Roese
|
334b9b004c
i2c: designware_i2c: Add DM support
|
%!s(int64=9) %!d(string=hai) anos |
|
Stefan Roese
|
3f4358da8d
i2c: designware_i2c: Prepare for DM driver conversion
|
%!s(int64=9) %!d(string=hai) anos |
|
Stefan Roese
|
11b544ab41
i2c: designware_i2c: Integrate set_speed() into dw_i2c_set_bus_speed()
|
%!s(int64=9) %!d(string=hai) anos |
|
Stefan Roese
|
1c8b089b45
i2c: designware_i2c: Add dw_i2c_enable() helper function
|
%!s(int64=9) %!d(string=hai) anos |
|
Stefan Roese
|
678398b19e
i2c: designware: Convert driver to multibus/multiadapter framework
|
%!s(int64=10) %!d(string=hai) anos |
 Jeroen Hofstee
|
c69ecd9722
i2c: designware: add an implement i2c protos
|
%!s(int64=10) %!d(string=hai) anos |
 Alexey Brodkin
|
3d93f6959b
designware_i2c: remove inclusion of <asm/arch/hardware.h>
|
%!s(int64=11) %!d(string=hai) anos |
 Chin Liang See
|
070cbaf821
designware_i2c: Enhance DesignWare I2C driver address support
|
%!s(int64=11) %!d(string=hai) anos |
|
Alexey Brodkin
|
32d041e218
drivers/designware_i2c - add suppor of CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
|
%!s(int64=11) %!d(string=hai) anos |
|
Alexey Brodkin
|
f9de54e9b0
designware_i2c: remove 10msec delay in i2c_xfer_finish
|
%!s(int64=11) %!d(string=hai) anos |
|
Alexey Brodkin
|
8b7c872539
designware_i2c: disable i2c controller during target address setup
|
%!s(int64=11) %!d(string=hai) anos |
 Wolfgang Denk
|
1a4596601f
Add GPL-2.0+ SPDX-License-Identifier to source files
|
%!s(int64=12) %!d(string=hai) anos |
 Armando Visconti
|
5b8439bbde
designware_i2c: Fixed the setting of the i2c bus speed
|
%!s(int64=12) %!d(string=hai) anos |
|
Armando Visconti
|
491739bb74
designware_i2c: Added s/w generation of stop bit
|
%!s(int64=12) %!d(string=hai) anos |
|
Armando Visconti
|
ac6e2fe6e4
designware_i2c.c: Added the support for MULTI_BUS
|
%!s(int64=12) %!d(string=hai) anos |
|
Stefan Roese
|
496ba48f5e
i2c: designware_i2c.c: Add support for the "i2c probe" command
|
%!s(int64=13) %!d(string=hai) anos |
|
Armando Visconti
|
5e3e8dda51
i2c:designware Turn off the ctrl when setting the speed
|
%!s(int64=13) %!d(string=hai) anos |
 Vipin KUMAR
|
031ed2fa74
i2c: Add support for designware i2c controller
|
%!s(int64=13) %!d(string=hai) anos |
