Convert CONFIG_CMD_FPGA_LOADBP et al to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_FPGA_LOADBP
   CONFIG_CMD_FPGA_LOADFS
   CONFIG_CMD_FPGA_LOADMK
   CONFIG_CMD_FPGA_LOADP

Signed-off-by: Simon Glass <sjg@chromium.org>

README

@@ -2384,19 +2384,6 @@ The following options need to be configured:
 
 		Specify the number of FPGA devices to support.
 
-		CONFIG_CMD_FPGA_LOADMK
-
-		Enable support for fpga loadmk command
-
-		CONFIG_CMD_FPGA_LOADP
-
-		Enable support for fpga loadp command - load partial bitstream
-
-		CONFIG_CMD_FPGA_LOADBP
-
-		Enable support for fpga loadbp command - load partial bitstream
-		(Xilinx only)
-
 		CONFIG_SYS_FPGA_PROG_FEEDBACK
 
 		Enable printing of hash marks during FPGA configuration.

arch/Kconfig

@@ -86,6 +86,7 @@ config X86
 	select DM_SPI_FLASH
 	select USB_EHCI_HCD
 	select DM_MMC if MMC
+	imply CMD_FPGA_LOADMK
 
 config XTENSA
 	bool "Xtensa architecture"

cmd/Kconfig

@@ -593,6 +593,32 @@ config CMD_FPGA
 	help
 	  FPGA support.
 
+config CMD_FPGA_LOADBP
+	bool "fpga loadbp - load partial bitstream (Xilinx only)"
+	depends on CMD_FPGA
+	help
+	  Supports loading an FPGA device from a bitstream buffer containing
+	  a partial bitstream.
+
+config CMD_FPGA_LOADFS
+	bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)"
+	depends on CMD_FPGA
+	help
+	  Supports loading an FPGA device from a FAT filesystem.
+
+config CMD_FPGA_LOADMK
+	bool "fpga loadmk - load bitstream from image"
+	depends on CMD_FPGA
+	help
+	  Supports loading an FPGA device from a image generated by mkimage.
+
+config CMD_FPGA_LOADP
+	bool "fpga loadp - load partial bitstream"
+	depends on CMD_FPGA
+	help
+	  Supports loading an FPGA device from a bitstream buffer containing
+	  a partial bitstream.
+
 config CMD_FPGAD
 	bool "fpgad - dump FPGA registers"
 	help

configs/astro_mcf5373l_defconfig

@@ -5,6 +5,7 @@ CONFIG_BOOTDELAY=1
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="URMEL > "
 CONFIG_CMD_I2C=y
+CONFIG_CMD_FPGA_LOADMK=y
 # CONFIG_CMD_SETEXPR is not set
 # CONFIG_CMD_NET is not set
 # CONFIG_CMD_NFS is not set

configs/mt_ventoux_defconfig

@@ -17,6 +17,7 @@ CONFIG_CMD_EEPROM=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_FPGA_LOADMK=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y

configs/x600_defconfig

@@ -20,6 +20,7 @@ CONFIG_AUTOBOOT_STOP_STR=" "
 CONFIG_LOOPW=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_FPGA_LOADMK=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y

configs/zynq_microzed_defconfig

@@ -16,6 +16,10 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DFU=y
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TFTPPUT=y

configs/zynq_picozed_defconfig

@@ -12,6 +12,10 @@ CONFIG_SYS_PROMPT="Zynq> "
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DFU=y
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TFTPPUT=y

configs/zynq_zc702_defconfig

@@ -19,6 +19,10 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DFU=y
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TFTPPUT=y

configs/zynq_zc706_defconfig

@@ -19,6 +19,10 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DFU=y
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TFTPPUT=y

configs/zynq_zc770_xm010_defconfig

@@ -15,6 +15,10 @@ CONFIG_SYS_PROMPT="Zynq> "
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TFTPPUT=y

configs/zynq_zc770_xm011_defconfig

@@ -14,6 +14,10 @@ CONFIG_SYS_PROMPT="Zynq> "
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_NAND=y
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TFTPPUT=y

configs/zynq_zc770_xm012_defconfig

@@ -11,6 +11,10 @@ CONFIG_SPL=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="Zynq> "
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TFTPPUT=y

configs/zynq_zc770_xm013_defconfig

@@ -13,6 +13,10 @@ CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="Zynq> "
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TFTPPUT=y

configs/zynq_zed_defconfig

@@ -16,6 +16,10 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DFU=y
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TFTPPUT=y

configs/zynq_zybo_defconfig

@@ -19,6 +19,10 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DFU=y
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_CMD_FPGA_LOADMK=y
+CONFIG_CMD_FPGA_LOADP=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TFTPPUT=y

include/configs/astro_mcf5373l.h

@@ -63,7 +63,6 @@
 #define CONFIG_CMD_JFFS2
 #endif
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_FPGA_LOADMK
 #define CONFIG_CMDLINE_EDITING
 
 #define CONFIG_MCFRTC

include/configs/mt_ventoux.h

@@ -39,7 +39,6 @@
 /*
  * FPGA
  */
-#define CONFIG_CMD_FPGA_LOADMK
 #define CONFIG_FPGA
 #define CONFIG_FPGA_XILINX
 #define CONFIG_FPGA_SPARTAN3

include/configs/topic_miami.h

@@ -44,10 +44,6 @@
 #undef CONFIG_SPL_FPGA_SUPPORT
 
 /* FPGA commands that we don't use */
-#undef CONFIG_CMD_FPGA_LOADMK
-#undef CONFIG_CMD_FPGA_LOADP
-#undef CONFIG_CMD_FPGA_LOADBP
-#undef CONFIG_CMD_FPGA_LOADFS
 
 /* Extras */
 #define CONFIG_CMD_MEMTEST

include/configs/x600.h

@@ -106,7 +106,6 @@
 /*
  * Command support defines
  */
-#define CONFIG_CMD_FPGA_LOADMK
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_SAVES

include/configs/x86-common.h

@@ -70,7 +70,6 @@
 /*-----------------------------------------------------------------------
  * Command line configuration.
  */
-#define CONFIG_CMD_FPGA_LOADMK
 #define CONFIG_CMD_IO
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_PCI

include/configs/zynq-common.h

@@ -259,10 +259,6 @@
 #define CONFIG_FPGA
 #define CONFIG_FPGA_XILINX
 #define CONFIG_FPGA_ZYNQPL
-#define CONFIG_CMD_FPGA_LOADMK
-#define CONFIG_CMD_FPGA_LOADP
-#define CONFIG_CMD_FPGA_LOADBP
-#define CONFIG_CMD_FPGA_LOADFS
 
 /* FIT support */
 #define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */

scripts/config_whitelist.txt

@@ -383,10 +383,6 @@ CONFIG_CM922T_XA10
 CONFIG_CMDLINE_EDITING
 CONFIG_CMDLINE_PS_SUPPORT
 CONFIG_CMDLINE_TAG
-CONFIG_CMD_FPGA_LOADBP
-CONFIG_CMD_FPGA_LOADFS
-CONFIG_CMD_FPGA_LOADMK
-CONFIG_CMD_FPGA_LOADP
 CONFIG_CMD_FUSE
 CONFIG_CMD_GETTIME
 CONFIG_CMD_GSC