blackfin: make name_to_gpio be a weak symbol

This required moving it into a C file from the header.

The only user of a non-default name_to_gpio is blackfin, therefore build tested
with the blackfin bct-brettl2 build, which is one I picked at random. Also
tested with a build for the ARM tec board which uses the default/fallback
implementation. Inspection with objdump shows that both have done the right
thing.

This change was requested by Marek during review of the sunxi patch series.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Sonic Zhang <sonic.adi@gmail.com>

arch/blackfin/cpu/gpio.c

@@ -759,6 +759,54 @@ void bfin_reset_boot_spi_cs(unsigned short pin)
 	udelay(1);
 }
 
+int name_to_gpio(const char *name)
+{
+	int port_base;
+
+	if (tolower(*name) == 'p') {
+		++name;
+
+		switch (tolower(*name)) {
+#ifdef GPIO_PA0
+		case 'a': port_base = GPIO_PA0; break;
+#endif
+#ifdef GPIO_PB0
+		case 'b': port_base = GPIO_PB0; break;
+#endif
+#ifdef GPIO_PC0
+		case 'c': port_base = GPIO_PC0; break;
+#endif
+#ifdef GPIO_PD0
+		case 'd': port_base = GPIO_PD0; break;
+#endif
+#ifdef GPIO_PE0
+		case 'e': port_base = GPIO_PE0; break;
+#endif
+#ifdef GPIO_PF0
+		case 'f': port_base = GPIO_PF0; break;
+#endif
+#ifdef GPIO_PG0
+		case 'g': port_base = GPIO_PG0; break;
+#endif
+#ifdef GPIO_PH0
+		case 'h': port_base = GPIO_PH0; break;
+#endif
+#ifdef GPIO_PI0
+		case 'i': port_base = GPIO_PI0; break;
+#endif
+#ifdef GPIO_PJ
+		case 'j': port_base = GPIO_PJ0; break;
+#endif
+		default:  return -1;
+		}
+
+		++name;
+	} else
+		port_base = 0;
+
+	return port_base + simple_strtoul(name, NULL, 10);
+}
+
 void gpio_labels(void)
 {
 	int c, gpio;

arch/blackfin/include/asm/gpio.h

@@ -160,55 +160,6 @@ static inline int gpio_is_valid(int number)
 
 #include <linux/ctype.h>
 
-static inline int name_to_gpio(const char *name)
-{
-	int port_base;
-
-	if (tolower(*name) == 'p') {
-		++name;
-
-		switch (tolower(*name)) {
-#ifdef GPIO_PA0
-		case 'a': port_base = GPIO_PA0; break;
-#endif
-#ifdef GPIO_PB0
-		case 'b': port_base = GPIO_PB0; break;
-#endif
-#ifdef GPIO_PC0
-		case 'c': port_base = GPIO_PC0; break;
-#endif
-#ifdef GPIO_PD0
-		case 'd': port_base = GPIO_PD0; break;
-#endif
-#ifdef GPIO_PE0
-		case 'e': port_base = GPIO_PE0; break;
-#endif
-#ifdef GPIO_PF0
-		case 'f': port_base = GPIO_PF0; break;
-#endif
-#ifdef GPIO_PG0
-		case 'g': port_base = GPIO_PG0; break;
-#endif
-#ifdef GPIO_PH0
-		case 'h': port_base = GPIO_PH0; break;
-#endif
-#ifdef GPIO_PI0
-		case 'i': port_base = GPIO_PI0; break;
-#endif
-#ifdef GPIO_PJ
-		case 'j': port_base = GPIO_PJ0; break;
-#endif
-		default:  return -1;
-		}
-
-		++name;
-	} else
-		port_base = 0;
-
-	return port_base + simple_strtoul(name, NULL, 10);
-}
-#define name_to_gpio(n) name_to_gpio(n)
-
 #define gpio_status() gpio_labels()
 
 #endif /* __ASSEMBLY__ */

common/cmd_gpio.c

@@ -11,9 +11,10 @@
 #include <dm.h>
 #include <asm/gpio.h>
 
-#ifndef name_to_gpio
-#define name_to_gpio(name) simple_strtoul(name, NULL, 10)
-#endif
+int __weak name_to_gpio(const char *name)
+{
+	return simple_strtoul(name, NULL, 10);
+}
 
 enum gpio_cmd {
 	GPIO_INPUT,