OMAP3: igep00x0: Fix boot hang and add support for status LED.

Use the STATUS_LED APIs for indicating a boot progress instead of
show_boot_progress.

This patch also fixes a problem introduced with commit b3f4ca1135 (dm: omap3:
Move to driver model for GPIO and serial). After that commit the board doesn't
boot. Looks like the problem is the gpio_request call inside the function
show_boot_progress.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

board/isee/igep00x0/igep00x0.c

@@ -5,6 +5,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 #include <common.h>
+#include <status_led.h>
 #include <dm.h>
 #include <ns16550.h>
 #include <twl4030.h>
@@ -53,21 +54,12 @@ int board_init(void)
 	/* boot param addr */
 	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
 
-	return 0;
-}
-
-#if defined(CONFIG_SHOW_BOOT_PROGRESS) && !defined(CONFIG_SPL_BUILD)
-void show_boot_progress(int val)
-{
-	if (val < 0) {
-		/* something went wrong */
-		return;
-	}
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+	status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
+#endif
 
-	if (!gpio_request(IGEP00X0_GPIO_LED, ""))
-		gpio_direction_output(IGEP00X0_GPIO_LED, 1);
+	return 0;
 }
-#endif
 
 #ifdef CONFIG_SPL_BUILD
 /*

board/isee/igep00x0/igep00x0.h

@@ -7,14 +7,6 @@
 #ifndef _IGEP00X0_H_
 #define _IGEP00X0_H_
 
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
-#define IGEP00X0_GPIO_LED 27
-#endif
-
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
-#define IGEP00X0_GPIO_LED 16
-#endif
-
 const omap3_sysinfo sysinfo = {
 	DDR_STACKED,
 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)

include/configs/omap3_igep00x0.h

@@ -29,11 +29,21 @@
 
 #define CONFIG_REVISION_TAG		1
 
-/* define to enable boot progress via leds */
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
-    (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
-#define CONFIG_SHOW_BOOT_PROGRESS
+/* Status LED */
+#define CONFIG_STATUS_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define CONFIG_GPIO_LED
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
+#define RED_LED_GPIO 27
+#endif
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
+#define RED_LED_GPIO 16
 #endif
+#define RED_LED_DEV				0
+#define STATUS_LED_BIT			RED_LED_GPIO
+#define STATUS_LED_STATE		STATUS_LED_ON
+#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BOOT			RED_LED_DEV
 
 /* GPIO banks */
 #define CONFIG_OMAP3_GPIO_3		/* GPIO64 .. 95 is in GPIO bank 3 */