imx: mx6: ddr init MMDC according to ddr_type

To i.MX6, DDR3 and LPDDR2 is supported, so rename function mx6_dram_cfg
to mx6_ddr3_cfg and the original mx6_dram_cfg function only is a wrapper.
The new reimplemented function mx6_dram_cfg only invokes mx6_ddr3_cfg
when ddr_type is for DDR3. Later we can use ddr_type to initialize
MMDC for LPDDR2.

Initialize ddr_type for different boards which enable SPL.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Stefan Roese <sr@denx.de>

arch/arm/cpu/armv7/mx6/ddr.c

@@ -348,7 +348,7 @@ void mx6sdl_dram_iocfg(unsigned width,
 		mmdc1->entry = value;					  \
 	} while (0)
 
-void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo,
+void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo,
 		  const struct mx6_mmdc_calibration *calib,
 		  const struct mx6_ddr3_cfg *ddr3_cfg)
 {
@@ -655,3 +655,15 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo,
 	/* wait for auto-ZQ calibration to complete */
 	mdelay(1);
 }
+
+void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo,
+		  const struct mx6_mmdc_calibration *calib,
+		  const void *ddr_cfg)
+{
+	if (sysinfo->ddr_type == DDR_TYPE_DDR3) {
+		mx6_ddr3_cfg(sysinfo, calib, ddr_cfg);
+	} else {
+		puts("Unsupported ddr type\n");
+		hang();
+	}
+}

arch/arm/include/asm/arch-mx6/mx6-ddr.h

@@ -444,7 +444,7 @@ void mx6sl_dram_iocfg(unsigned width,
 /* configure mx6 mmdc registers */
 void mx6_dram_cfg(const struct mx6_ddr_sysinfo *,
 		  const struct mx6_mmdc_calibration *,
-		  const struct mx6_ddr3_cfg *);
+		  const void *);
 
 #endif /* CONFIG_SPL_BUILD */
 

board/barco/platinum/spl_picon.c

@@ -137,6 +137,7 @@ static void spl_dram_init(int width)
 		.bi_on = 1,	/* Bank interleaving enabled */
 		.sde_to_rst = 0x10,	/* 14 cycles, 200us (JEDEC default) */
 		.rst_to_cke = 0x23,	/* 33 cycles, 500us (JEDEC default) */
+		.ddr_type = DDR_TYPE_DDR3,
 	};
 
 	mx6sdl_dram_iocfg(width, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);

board/barco/platinum/spl_titanium.c

@@ -140,6 +140,7 @@ static void spl_dram_init(int width)
 		.bi_on = 1,	/* Bank interleaving enabled */
 		.sde_to_rst = 0x10,	/* 14 cycles, 200us (JEDEC default) */
 		.rst_to_cke = 0x23,	/* 33 cycles, 500us (JEDEC default) */
+		.ddr_type = DDR_TYPE_DDR3,
 	};
 
 	mx6dq_dram_iocfg(width, &mx6dq_ddr_ioregs, &mx6dq_grp_ioregs);

board/freescale/mx6sabresd/mx6sabresd.c

@@ -824,6 +824,7 @@ static void spl_dram_init(void)
 		.bi_on = 1,	/* Bank interleaving enabled */
 		.sde_to_rst = 0x10,	/* 14 cycles, 200us (JEDEC default) */
 		.rst_to_cke = 0x23,	/* 33 cycles, 500us (JEDEC default) */
+		.ddr_type = DDR_TYPE_DDR3,
 	};
 
 	mx6dq_dram_iocfg(64, &mx6_ddr_ioregs, &mx6_grp_ioregs);

board/freescale/mx6sxsabresd/mx6sxsabresd.c

@@ -566,6 +566,7 @@ static void spl_dram_init(void)
 		.bi_on = 1,		/* Bank interleaving enabled */
 		.sde_to_rst = 0x10,	/* 14 cycles, 200us (JEDEC default) */
 		.rst_to_cke = 0x23,	/* 33 cycles, 500us (JEDEC default) */
+		.ddr_type = DDR_TYPE_DDR3,
 	};
 
 	mx6sx_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);

board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c

@@ -708,6 +708,7 @@ static void spl_dram_init(void)
 		.bi_on = 1,		/* Bank interleaving enabled */
 		.sde_to_rst = 0x10,	/* 14 cycles, 200us (JEDEC default) */
 		.rst_to_cke = 0x23,	/* 33 cycles, 500us (JEDEC default) */
+		.ddr_type = DDR_TYPE_DDR3,
 	};
 
 	mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);

board/gateworks/gw_ventana/gw_ventana_spl.c

@@ -365,6 +365,7 @@ static void spl_dram_init(int width, int size_mb, int board_model)
 		.sde_to_rst = 0x10,	/* 14 cycles, 200us (JEDEC default) */
 		.rst_to_cke = 0x23,	/* 33 cycles, 500us (JEDEC default) */
 		.pd_fast_exit = 1, /* enable precharge power-down fast exit */
+		.ddr_type = DDR_TYPE_DDR3,
 	};
 
 	/*

board/solidrun/mx6cuboxi/mx6cuboxi.c

@@ -615,6 +615,7 @@ static void spl_dram_init(int width)
 		.bi_on = 1,	/* Bank interleaving enabled */
 		.sde_to_rst = 0x10,	/* 14 cycles, 200us (JEDEC default) */
 		.rst_to_cke = 0x23,	/* 33 cycles, 500us (JEDEC default) */
+		.ddr_type = DDR_TYPE_DDR3,
 	};
 
 	if (is_cpu_type(MXC_CPU_MX6D) || is_cpu_type(MXC_CPU_MX6Q))