secure_boot: include/configs: make secure boot header file uniform

The file fsl_secure_boot.h must be included in config file for
Secure Boot. This is not required to be protected by any macro.
CONFIG_FSL_CAAM must be defined and CONFIG_CMD_HASH should be
turned on.

The above was missing in some config files and all files have been
made uniform in this respect.

Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

arch/arm/include/asm/fsl_secure_boot.h

@@ -34,6 +34,11 @@
 #define CONFIG_FSL_ISBC_KEY_EXT
 #endif
 
+#ifdef CONFIG_LS1043A
+/* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit */
+#define CONFIG_ESBC_ADDR_64BIT
+#endif
+
 #ifndef CONFIG_FIT_SIGNATURE
 
 #define CONFIG_EXTRA_ENV \

include/configs/C29XPCIE.h

@@ -567,4 +567,8 @@
 
 #include <asm/fsl_secure_boot.h>
 
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_CMD_BLOB
+#endif
+
 #endif	/* __CONFIG_H */

include/configs/T102xQDS.h

@@ -39,6 +39,8 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #endif
 
+#define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
+
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_rcw.cfg
@@ -936,8 +938,16 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_BOOTCOMMAND	CONFIG_LINUX
 
-#ifdef CONFIG_SECURE_BOOT
+/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
+#define CONFIG_CMD_HASH
+#define CONFIG_SHA_HW_ACCEL
+#endif
+
 #include <asm/fsl_secure_boot.h>
+
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_CMD_BLOB
 #endif
 
 #endif	/* __T1024QDS_H */

include/configs/T102xRDB.h

@@ -33,6 +33,8 @@
 #define CONFIG_FSL_LAW			/* Use common FSL init code */
 #define CONFIG_ENV_OVERWRITE
 
+#define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
+
 /* support deep sleep */
 #ifdef CONFIG_PPC_T1024
 #define CONFIG_DEEP_SLEEP
@@ -948,8 +950,16 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_BOOTCOMMAND	CONFIG_LINUX
 
-#ifdef CONFIG_SECURE_BOOT
+/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
+#define CONFIG_CMD_HASH
+#define CONFIG_SHA_HW_ACCEL
+#endif
+
 #include <asm/fsl_secure_boot.h>
+
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_CMD_BLOB
 #endif
 
 #endif	/* __T1024RDB_H */

include/configs/T1040QDS.h

@@ -835,8 +835,9 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_BOOTCOMMAND		CONFIG_LINUX
 
-#ifdef CONFIG_SECURE_BOOT
 #include <asm/fsl_secure_boot.h>
+
+#ifdef CONFIG_SECURE_BOOT
 #define CONFIG_CMD_BLOB
 #endif
 

include/configs/T104xRDB.h

@@ -938,8 +938,9 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 
 #define CONFIG_BOOTCOMMAND		CONFIG_LINUX
 
-#ifdef CONFIG_SECURE_BOOT
 #include <asm/fsl_secure_boot.h>
+
+#ifdef CONFIG_SECURE_BOOT
 #define CONFIG_CMD_BLOB
 #endif
 

include/configs/T208xQDS.h

@@ -933,8 +933,9 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_BOOTCOMMAND		CONFIG_LINUX
 
-#ifdef CONFIG_SECURE_BOOT
 #include <asm/fsl_secure_boot.h>
+
+#ifdef CONFIG_SECURE_BOOT
 #define CONFIG_CMD_BLOB
 #undef CONFIG_CMD_USB
 #endif

include/configs/T208xRDB.h

@@ -889,8 +889,9 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_BOOTCOMMAND		CONFIG_LINUX
 
-#ifdef CONFIG_SECURE_BOOT
 #include <asm/fsl_secure_boot.h>
+
+#ifdef CONFIG_SECURE_BOOT
 #define CONFIG_CMD_BLOB
 #undef CONFIG_CMD_USB
 #endif

include/configs/ls1021aqds.h

@@ -659,12 +659,15 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_MISC_INIT_R
 
 /* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
 #define CONFIG_SHA_HW_ACCEL
+#endif
+
+#include <asm/fsl_secure_boot.h>
 
 #ifdef CONFIG_SECURE_BOOT
 #define CONFIG_CMD_BLOB
-#include <asm/fsl_secure_boot.h>
 #endif
 
 #endif

include/configs/ls1021atwr.h

@@ -517,12 +517,15 @@
 #define CONFIG_MISC_INIT_R
 
 /* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
 #define CONFIG_SHA_HW_ACCEL
+#endif
+
+#include <asm/fsl_secure_boot.h>
 
 #ifdef CONFIG_SECURE_BOOT
 #define CONFIG_CMD_BLOB
-#include <asm/fsl_secure_boot.h>
 #endif
 
 #endif

include/configs/ls1043a_common.h

@@ -197,6 +197,8 @@
 #define CONFIG_DOS_PARTITION
 #endif
 
+#define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
+
 /* FMan ucode */
 #define CONFIG_SYS_DPAA_FMAN
 #ifdef CONFIG_SYS_DPAA_FMAN
@@ -252,4 +254,10 @@
 
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
+/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
+#define CONFIG_CMD_HASH
+#define CONFIG_SHA_HW_ACCEL
+#endif
+
 #endif /* __LS1043A_COMMON_H */

include/configs/ls1043aqds.h

@@ -405,4 +405,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_MII
 #define CONFIG_CMDLINE_TAG
 
+#include <asm/fsl_secure_boot.h>
+
 #endif /* __LS1043AQDS_H__ */

include/configs/ls1043ardb.h

@@ -291,14 +291,6 @@
 #define CONFIG_CMD_EXT2
 #endif
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
-#define CONFIG_CMD_BLOB
-/* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit */
-#define CONFIG_ESBC_ADDR_64BIT
-#endif
-
 #include <asm/fsl_secure_boot.h>
 
 #endif /* __LS1043ARDB_H__ */