powerpc/board: SPL: Enable malloc flag in global data.

For malloc to work in SPL framework enable GD_FLG_FULL_MALLOC_INIT
flag in global data after allocating memory using mem_malloc_init.

Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

board/freescale/b4860qds/spl.c

@@ -91,6 +91,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifndef CONFIG_SPL_NAND_BOOT
 	env_init();

board/freescale/c29xpcie/spl.c

@@ -57,6 +57,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 	/* relocate environment function pointers etc. */
 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,

board/freescale/p1010rdb/spl.c

@@ -72,6 +72,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifndef CONFIG_SPL_NAND_BOOT
 	env_init();

board/freescale/p1022ds/spl.c

@@ -86,6 +86,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 #ifndef CONFIG_SPL_NAND_BOOT
 	env_init();
 #endif

board/freescale/p1_p2_rdb_pc/spl.c

@@ -83,6 +83,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifndef CONFIG_SPL_NAND_BOOT
 	env_init();

board/freescale/t102xqds/spl.c

@@ -120,6 +120,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifdef CONFIG_SPL_NAND_BOOT
 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,

board/freescale/t102xrdb/spl.c

@@ -107,6 +107,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifdef CONFIG_SPL_NAND_BOOT
 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,

board/freescale/t104xrdb/spl.c

@@ -98,6 +98,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifdef CONFIG_SPL_MMC_BOOT
 	mmc_initialize(bd);

board/freescale/t208xqds/spl.c

@@ -106,6 +106,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifdef CONFIG_SPL_NAND_BOOT
 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,

board/freescale/t208xrdb/spl.c

@@ -76,6 +76,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifdef CONFIG_SPL_NAND_BOOT
 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,

board/freescale/t4qds/spl.c

@@ -116,6 +116,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifdef CONFIG_SPL_NAND_BOOT
 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,

board/freescale/t4rdb/spl.c

@@ -80,6 +80,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 	mmc_initialize(bd);
 	mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,