ARM: Add arch/arm/cpu/armv7/Kconfig with non-secure and virt options

Add arch/arm/cpu/armv7/Kconfig with non-secure and virt options, this is a
preparation patch for adding an env variable to choose between secure /
non-secure boot on non-secure boot capable systems, specifically this
prepares for adding CONFIG_ARMV7_BOOT_SEC_DEFAULT as a proper Kconfig option.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>

arch/arm/Kconfig

@@ -413,6 +413,8 @@ config TARGET_INTEGRATORCP_CM946ES
 config TARGET_VEXPRESS_CA15_TC2
 	bool "Support vexpress_ca15_tc2"
 	select CPU_V7
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
 
 config TARGET_VEXPRESS_CA5X2
 	bool "Support vexpress_ca5x2"
@@ -812,6 +814,8 @@ source "arch/arm/cpu/arm926ejs/versatile/Kconfig"
 
 source "arch/arm/cpu/armv7/zynq/Kconfig"
 
+source "arch/arm/cpu/armv7/Kconfig"
+
 source "board/aristainetos/Kconfig"
 source "board/BuR/kwb/Kconfig"
 source "board/BuR/tseries/Kconfig"

arch/arm/cpu/armv7/Kconfig

@@ -0,0 +1,23 @@
+if CPU_V7
+
+config CPU_V7_HAS_NONSEC
+        bool
+
+config CPU_V7_HAS_VIRT
+        bool
+
+config ARMV7_NONSEC
+	boolean "Enable support for booting in non-secure mode" if EXPERT
+	depends on CPU_V7_HAS_NONSEC
+	default y
+	---help---
+	Say Y here to enable support for booting in non-secure / SVC mode.
+
+config ARMV7_VIRT
+	boolean "Enable support for hardware virtualization" if EXPERT
+	depends on CPU_V7_HAS_VIRT && ARMV7_NONSEC
+	default y
+	---help---
+	Say Y here to boot in hypervisor (HYP) mode when booting non-secure.
+
+endif

arch/arm/cpu/armv7/exynos/Kconfig

@@ -26,6 +26,8 @@ config TARGET_ODROID
 
 config TARGET_ARNDALE
 	bool "Exynos5250 Arndale board"
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
 	select SUPPORT_SPL
 	select OF_CONTROL if !SPL_BUILD
 

board/sunxi/Kconfig

@@ -21,6 +21,8 @@ config MACH_SUN6I
 config MACH_SUN7I
 	bool "sun7i (Allwinner A20)"
 	select CPU_V7
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
 	select SUPPORT_SPL
 
 config MACH_SUN8I

include/configs/arndale.h

@@ -60,6 +60,4 @@
 /* The PERIPHBASE in the CBAR register is wrong on the Arndale, so override it */
 #define CONFIG_ARM_GIC_BASE_ADDRESS	0x10480000
 
-#define CONFIG_ARMV7_VIRT
-
 #endif	/* __CONFIG_H */

include/configs/sun7i.h

@@ -22,8 +22,6 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #endif
 
-#define CONFIG_ARMV7_VIRT		1
-#define CONFIG_ARMV7_NONSEC		1
 #define CONFIG_ARMV7_PSCI		1
 #define CONFIG_ARMV7_PSCI_NR_CPUS	2
 #define CONFIG_ARMV7_SECURE_BASE	SUNXI_SRAM_B_BASE

include/configs/vexpress_ca15_tc2.h

@@ -18,6 +18,4 @@
 #define CONFIG_SYSFLAGS_ADDR	0x1c010030
 #define CONFIG_SMP_PEN_ADDR	CONFIG_SYSFLAGS_ADDR
 
-#define CONFIG_ARMV7_VIRT
-
 #endif