powerpc: P1020UTM: Separate from P1_P2_RDB_P2 in Kconfig

Use TARGET_P1020UTM instead of sharing with TARGET_P1_P2_RDB_PC
to simplify Kconfig and config macros.

Remove macro CONFIG_P1020UTM.

Signed-off-by: York Sun <york.sun@nxp.com>

arch/powerpc/cpu/mpc85xx/Kconfig

@@ -130,6 +130,10 @@ config TARGET_P1020RDB_PD
 	select SUPPORT_SPL
 	select SUPPORT_TPL
 
+config TARGET_P1020UTM
+	bool "Support P1020UTM"
+	select SUPPORT_SPL
+	select SUPPORT_TPL
 
 config TARGET_P1_P2_RDB_PC
 	bool "Support p1_p2_rdb_pc"

board/freescale/p1_p2_rdb_pc/Kconfig

@@ -1,7 +1,8 @@
 if TARGET_P1_P2_RDB_PC		|| \
 	TARGET_P1020MBG		|| \
 	TARGET_P1020RDB_PC	|| \
-	TARGET_P1020RDB_PD
+	TARGET_P1020RDB_PD	|| \
+	TARGET_P1020UTM
 
 config SYS_BOARD
 	default "p1_p2_rdb_pc"

board/freescale/p1_p2_rdb_pc/ddr.c

@@ -16,7 +16,7 @@
 #ifdef CONFIG_SYS_DDR_RAW_TIMING
 #if	defined(CONFIG_P1020RDB_PROTO) || \
 	defined(CONFIG_P1021RDB) || \
-	defined(CONFIG_P1020UTM)
+	defined(CONFIG_TARGET_P1020UTM)
 /* Micron MT41J256M8_187E */
 dimm_params_t ddr_raw_timing = {
 	.n_ranks = 1,

configs/P1020UTM-PC_36BIT_SDCARD_defconfig

@@ -6,13 +6,13 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1020UTM=y
 CONFIG_PHYS_64BIT=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1020UTM,SDCARD"
+CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y

configs/P1020UTM-PC_36BIT_defconfig

@@ -1,12 +1,11 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1020UTM=y
 CONFIG_PHYS_64BIT=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1020UTM"
 CONFIG_BOOTDELAY=10
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y

configs/P1020UTM-PC_SDCARD_defconfig

@@ -6,12 +6,12 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1020UTM=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1020UTM,SDCARD"
+CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y

configs/P1020UTM-PC_defconfig

@@ -1,11 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1020UTM=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1020UTM"
 CONFIG_BOOTDELAY=10
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y

include/configs/p1_p2_rdb_pc.h

@@ -21,7 +21,7 @@
 #define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
-#if defined(CONFIG_P1020UTM)
+#if defined(CONFIG_TARGET_P1020UTM)
 #define CONFIG_BOARDNAME "P1020UTM-PC"
 #define CONFIG_P1020
 #define __SW_BOOT_MASK		0x03
@@ -409,7 +409,7 @@
 #if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD))
 #define CONFIG_SYS_MAX_FLASH_SECT	512	/* 64M */
 #define CONFIG_SYS_FLASH_BASE		0xec000000
-#elif defined(CONFIG_P1020UTM)
+#elif defined(CONFIG_TARGET_P1020UTM)
 #define CONFIG_SYS_MAX_FLASH_SECT	256	/* 32M */
 #define CONFIG_SYS_FLASH_BASE		0xee000000
 #else

scripts/config_whitelist.txt

@@ -3384,7 +3384,6 @@ CONFIG_OS_ENV_ADDR
 CONFIG_OTHBOOTARGS
 CONFIG_OVERWRITE_ETHADDR_ONCE
 CONFIG_P1020
-CONFIG_P1020UTM
 CONFIG_P1021
 CONFIG_P1021RDB
 CONFIG_P1024