configs: Update Meson GX configs

Enable USB on all Amlogic Meson GXL based board.
Enable Regulator support on all boards.
Enable ADC support on the LibreTech-CC board.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

configs/khadas-vim_defconfig

@@ -16,10 +16,15 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
 CONFIG_OF_CONTROL=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM_GPIO=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_RESET=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_MESON_GX=y
 CONFIG_PHY_ADDR_ENABLE=y
@@ -34,3 +39,12 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_DEBUG_UART_SKIP_INIT=y
 CONFIG_MESON_SERIAL=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_PHY=y
+CONFIG_MESON_GXL_USB_PHY=y

configs/libretech-cc_defconfig

@@ -13,13 +13,21 @@ CONFIG_OF_BOARD_SETUP=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
+CONFIG_CMD_ADC=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
+CONFIG_ADC=y
+CONFIG_SARADC_MESON=y
 CONFIG_OF_CONTROL=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM_GPIO=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_RESET=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_MESON_GX=y
 CONFIG_PHY_ADDR_ENABLE=y
@@ -34,3 +42,12 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_DEBUG_UART_SKIP_INIT=y
 CONFIG_MESON_SERIAL=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_PHY=y
+CONFIG_MESON_GXL_USB_PHY=y

configs/odroid-c2_defconfig

@@ -18,11 +18,15 @@ CONFIG_CMD_I2C=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
 CONFIG_OF_CONTROL=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_MESON=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_RESET=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_MESON_GX=y
 CONFIG_DM_ETH=y

configs/p212_defconfig

@@ -16,10 +16,15 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
 CONFIG_OF_CONTROL=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM_GPIO=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_RESET=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_MESON_GX=y
 CONFIG_PHY_ADDR_ENABLE=y
@@ -34,3 +39,12 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_DEBUG_UART_SKIP_INIT=y
 CONFIG_MESON_SERIAL=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_PHY=y
+CONFIG_MESON_GXL_USB_PHY=y