usb: s3c-otg: Rename USB_GADGET_S3C_UDC_OTG* to USB_GADGET_DWC2_OTG*

The s3c-otg IP block is in fact a DWC2 OTG one, so finally rename the
config option to make it less misleading. No functional change, just
a mechanical change done using the following script:

  git grep USB_GADGET_S3C_UDC_OTG | cut -d : -f 1 | sort -u | \
  while read line ; do
    sed -i "s/USB_GADGET_S3C_UDC_OTG/USB_GADGET_DWC2_OTG/g" $line ;
  done

Signed-off-by: Marek Vasut <marex@denx.de>

drivers/usb/gadget/Makefile

@@ -13,8 +13,8 @@ ifdef CONFIG_USB_GADGET
 obj-$(CONFIG_USB_GADGET_AT91) += at91_udc.o
 obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o
 obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o
-obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += dwc2_udc_otg.o
-obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG_PHY) += dwc2_udc_otg_phy.o
+obj-$(CONFIG_USB_GADGET_DWC2_OTG) += dwc2_udc_otg.o
+obj-$(CONFIG_USB_GADGET_DWC2_OTG_PHY) += dwc2_udc_otg_phy.o
 obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o
 obj-$(CONFIG_CI_UDC)	+= ci_udc.o
 obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o

include/configs/bcm28155_ap.h

@@ -142,7 +142,7 @@
 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET_VBUS_DRAW	0
-#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_DWC2_OTG
 #define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USBID_ADDR		0x34052c46

include/configs/exynos4-common.h

@@ -51,8 +51,8 @@
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
 #define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_S3C_UDC_OTG
-#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY
+#define CONFIG_USB_GADGET_DWC2_OTG
+#define CONFIG_USB_GADGET_DWC2_OTG_PHY
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET_VBUS_DRAW	2
 

include/configs/s5p_goni.h

@@ -269,8 +269,8 @@
 
 #define CONFIG_SYS_MAX_I2C_BUS	7
 #define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_S3C_UDC_OTG
-#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY
+#define CONFIG_USB_GADGET_DWC2_OTG
+#define CONFIG_USB_GADGET_DWC2_OTG_PHY
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET_VBUS_DRAW 2
 #define CONFIG_CMD_USB_MASS_STORAGE

include/configs/s5pc210_universal.h

@@ -177,8 +177,8 @@
 #define CONFIG_POWER_MAX8998
 
 #define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_S3C_UDC_OTG
-#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY
+#define CONFIG_USB_GADGET_DWC2_OTG
+#define CONFIG_USB_GADGET_DWC2_OTG_PHY
 #define CONFIG_USB_GADGET_DUALSPEED
 
 /*

include/configs/smdkv310.h

@@ -13,8 +13,8 @@
 
 #undef CONFIG_BOARD_COMMON
 #undef CONFIG_USB_GADGET
-#undef CONFIG_USB_GADGET_S3C_UDC_OTG
-#undef CONFIG_USB_GADGET_S3C_UDC_OTG_PHY
+#undef CONFIG_USB_GADGET_DWC2_OTG
+#undef CONFIG_USB_GADGET_DWC2_OTG_PHY
 #undef CONFIG_CMD_USB_MASS_STORAGE
 #undef CONFIG_REVISION_TAG
 #undef CONFIG_CMD_THOR_DOWNLOAD

include/configs/socfpga_common.h

@@ -243,7 +243,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
  */
 #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
 #define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_DWC2_OTG
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET_VBUS_DRAW	2