include/configs: remove numerous CONFIG_SYS_BARGSIZE definitions

This commit removes definitions of CONFIG_SYS_BARGSIZE defined to be
equal to CONFIG_SYS_CBSIZE in numerous configuration files.

We remove such definitions in two situations:

 - CONFIG_SYS_CBSIZE is otherwise not defined in the board
   configuration file, which means the default value of
   CONFIG_SYS_CBSIZE == 256 applies. In this case, the default value
   of CONFIG_SYS_BARGSIZE == 512 (common/image.c) is suitable, as it is
   larger.

 - CONFIG_SYS_CBSIZE is defined in the board configuration file, but
   to a value equal or less than 512. In this case, the default value
   of CONFIG_SYS_BARGSIZE == 512 (common.image.c) is suitable, as it
   is equal or larger.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

include/configs/10m50_devboard.h

@@ -78,7 +78,6 @@
  * MISC
  */
 #define CONFIG_SYS_LONGHELP		/* Provide extended help */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Bootarg buf size */
 #define CONFIG_SYS_LOAD_ADDR		0xcc000000	/* Half of RAM */
 #define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE

include/configs/3c120_devboard.h

@@ -81,7 +81,6 @@
  * MISC
  */
 #define CONFIG_SYS_LONGHELP		/* Provide extended help */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Bootarg buf size */
 #define CONFIG_SYS_LOAD_ADDR		0xd4000000	/* Half of RAM */
 #define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE

include/configs/B4860QDS.h

@@ -708,7 +708,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data

include/configs/BSC9132QDS.h

@@ -515,8 +515,6 @@ combinations. this should be removed later
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 64 MB of memory, since this is

include/configs/C29XPCIE.h

@@ -433,8 +433,6 @@
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 64 MB of memory, since this is

include/configs/M5208EVBE.h

@@ -80,7 +80,6 @@
 #define CONFIG_PRAM		512	/* 512 KB */
 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
 
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Arg Buf Sz */
 #define CONFIG_SYS_LOAD_ADDR	0x40010000
 
 #define CONFIG_SYS_CLK		166666666	/* CPU Core Clock */

include/configs/M52277EVB.h

@@ -131,8 +131,6 @@
 
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
-
 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 0x10000)
 
 #define CONFIG_SYS_MBAR		0xFC000000

include/configs/M5235EVB.h

@@ -95,7 +95,6 @@
 #define CONFIG_PRAM		512	/* 512 KB */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE+0x20000)
 
 #define CONFIG_SYS_CLK			75000000

include/configs/M5249EVB.h

@@ -41,8 +41,6 @@
 
 #define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
 
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
 #define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 #define CONFIG_AUTO_COMPLETE	1	/* add autocompletion support	*/
 #define CONFIG_MX_CYCLIC	1	/* enable mdc/mwc commands	*/

include/configs/M5253DEMO.h

@@ -94,8 +94,6 @@
 
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-
 #define CONFIG_SYS_LOAD_ADDR		0x00100000
 
 #define CONFIG_SYS_MEMTEST_START	0x400

include/configs/M5253EVBE.h

@@ -64,8 +64,6 @@
 
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-
 #define CONFIG_SYS_LOAD_ADDR		0x00100000
 
 #define CONFIG_SYS_MEMTEST_START	0x400

include/configs/M5272C3.h

@@ -98,7 +98,6 @@
 
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 #define CONFIG_SYS_LOAD_ADDR		0x20000
 #define CONFIG_SYS_MEMTEST_START	0x400
 #define CONFIG_SYS_MEMTEST_END		0x380000

include/configs/M5275EVB.h

@@ -90,8 +90,6 @@
 
 #define CONFIG_SYS_LONGHELP		/* undef to save memory	*/
 
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
 #define CONFIG_SYS_LOAD_ADDR		0x800000
 
 #define CONFIG_BOOTCOMMAND	"bootm ffe40000"

include/configs/M5282EVB.h

@@ -90,8 +90,6 @@
 
 #define	CONFIG_SYS_LONGHELP		/* undef to save memory         */
 
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
-
 #define CONFIG_SYS_LOAD_ADDR		0x20000
 
 #define CONFIG_SYS_MEMTEST_START	0x400

include/configs/M53017EVB.h

@@ -97,7 +97,6 @@
 #define CONFIG_PRAM		512	/* 512 KB */
 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
 
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Arg Buf Sz */
 #define CONFIG_SYS_LOAD_ADDR	0x40010000
 
 #define CONFIG_SYS_CLK		80000000

include/configs/M5329EVB.h

@@ -89,7 +89,6 @@
 #define CONFIG_PRAM		512	/* 512 KB */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 #define CONFIG_SYS_LOAD_ADDR		0x40010000
 
 #define CONFIG_SYS_CLK			80000000

include/configs/M5373EVB.h

@@ -89,7 +89,6 @@
 #define CONFIG_PRAM		512	/* 512 KB */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 #define CONFIG_SYS_LOAD_ADDR		0x40010000
 
 #define CONFIG_SYS_CLK			80000000

include/configs/M54418TWR.h

@@ -180,9 +180,6 @@
 
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
-/* Boot Argument Buffer Size    */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)
 
 #define CONFIG_SYS_MBAR		0xFC000000

include/configs/M54455EVB.h

@@ -195,8 +195,6 @@
 
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
-
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)
 
 #define CONFIG_SYS_MBAR		0xFC000000

include/configs/M5475EVB.h

@@ -126,7 +126,6 @@
 #define CONFIG_PRAM		512	/* 512 KB */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 #define CONFIG_SYS_LOAD_ADDR		0x00010000
 
 #define CONFIG_SYS_CLK			CONFIG_SYS_BUSCLK

include/configs/M5485EVB.h

@@ -114,7 +114,6 @@
 #define CONFIG_PRAM		512	/* 512 KB */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 #define CONFIG_SYS_LOAD_ADDR		0x00010000
 
 #define CONFIG_SYS_CLK			CONFIG_SYS_BUSCLK

include/configs/MCR3000.h

@@ -70,7 +70,6 @@
 
 /* Miscellaneous configurable options */
 #define	CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 #define CONFIG_CMDLINE_EDITING		1
 #ifdef	CONFIG_HUSH_PARSER

include/configs/MPC8315ERDB.h

@@ -454,9 +454,6 @@
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR		0x2000000 /* default load address */
 
-				/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is

include/configs/MPC8323ERDB.h

@@ -327,9 +327,6 @@
 #define CONFIG_SYS_LONGHELP			/* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 
-				/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is

include/configs/MPC832XEMDS.h

@@ -411,9 +411,6 @@
 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 
-				/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is

include/configs/MPC8349EMDS.h

@@ -470,9 +470,6 @@
 #define CONFIG_SYS_LONGHELP			/* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 
-				/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is

include/configs/MPC8349ITX.h

@@ -493,9 +493,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 #define CONFIG_LOADADDR	800000	/* default location for tftp and bootm */
 
-				/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is

include/configs/MPC837XEMDS.h

@@ -482,9 +482,6 @@ extern int board_pci_host_broken(void);
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR		0x2000000 /* default load address */
 
-				/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is

include/configs/MPC837XERDB.h

@@ -496,9 +496,6 @@
 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000 /* default load address */
 
-				/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is

include/configs/MPC8536DS.h

@@ -603,7 +603,6 @@
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data

include/configs/MPC8540ADS.h

@@ -324,8 +324,6 @@
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 64 MB of memory, since this is

include/configs/MPC8541CDS.h

@@ -347,7 +347,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data

include/configs/MPC8544DS.h

@@ -360,7 +360,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data

include/configs/MPC8548CDS.h

@@ -465,7 +465,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data

include/configs/MPC8555CDS.h

@@ -345,7 +345,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data

include/configs/MPC8568MDS.h

@@ -360,7 +360,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data

include/configs/MPC8572DS.h

@@ -558,7 +558,6 @@
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data

include/configs/MPC8610HPCD.h

@@ -433,8 +433,6 @@
 #define CONFIG_CMDLINE_EDITING          /* Command-line editing */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is

include/configs/MPC8641HPCN.h

@@ -590,8 +590,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CMDLINE_EDITING		/* Command-line editing */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is

include/configs/P1010RDB.h

@@ -723,8 +723,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 64 MB of memory, since this is

include/configs/P1022DS.h

@@ -598,7 +598,6 @@
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
 /*
  * For booting Linux, the board info and command line data

include/configs/P1023RDB.h

@@ -253,8 +253,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
 #define CONFIG_CMDLINE_EDITING		/* Command-line editing */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
 /*
  * For booting Linux, the board info and command line data

include/configs/P2041RDB.h

@@ -594,8 +594,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
 /*
  * For booting Linux, the board info and command line data

include/configs/T102xQDS.h

@@ -774,7 +774,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_BARGSIZE  CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data

include/configs/T102xRDB.h

@@ -785,7 +785,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_BARGSIZE  CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data

include/configs/T1040QDS.h

@@ -653,7 +653,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data

include/configs/T104xRDB.h

@@ -768,7 +768,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data

include/configs/T208xQDS.h

@@ -739,7 +739,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMDLINE_EDITING		/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000 /* default load address */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data

include/configs/T208xRDB.h

@@ -685,7 +685,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMDLINE_EDITING		/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000 /* default load address */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data

include/configs/T4240RDB.h

@@ -276,7 +276,6 @@
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data

include/configs/TQM834x.h

@@ -273,9 +273,6 @@
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history */
 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support */
 
-				/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
 
 /*

include/configs/UCP1020.h

@@ -441,7 +441,6 @@
 #define CONFIG_SYS_LONGHELP			/* undef to save memory */
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 #define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms tick */
 
 /*

include/configs/adp-ae3xx.h

@@ -101,9 +101,6 @@
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory */
 
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
 /*
  * Size of malloc() pool
  */

include/configs/adp-ag101p.h

@@ -107,9 +107,6 @@
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory */
 
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
 /*
  * Size of malloc() pool
  */

include/configs/advantech_dms-ba16.h

@@ -208,8 +208,6 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_AUTO_COMPLETE
 
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
 #define CONFIG_SYS_MEMTEST_START       0x10000000
 #define CONFIG_SYS_MEMTEST_END         0x10010000
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

include/configs/am3517_crane.h

@@ -168,8 +168,6 @@
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
 #define CONFIG_SYS_MAXARGS		32	/* max number of command */
 						/* args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
 #define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \

include/configs/am3517_evm.h

@@ -233,8 +233,6 @@
 
 /* Console I/O Buffer Size */
 #define CONFIG_SYS_CBSIZE		512
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)

include/configs/amcore.h

@@ -33,9 +33,6 @@
 /* undef to save memory	*/
 #undef	CONFIG_SYS_LONGHELP
 
-/* Boot argument buffer size	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
 #define CONFIG_AUTO_COMPLETE		1 /* add autocompletion support	*/
 #define CONFIG_MX_CYCLIC		1 /* enable mdc/mwc commands	*/
 

include/configs/aspeed-common.h

@@ -58,8 +58,6 @@
  */
 #define CONFIG_SYS_LONGHELP
 
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
 #define CONFIG_BOOTCOMMAND		"bootm 20080000 20300000"
 #define CONFIG_ENV_OVERWRITE
 

include/configs/astro_mcf5373l.h

@@ -178,8 +178,6 @@
 
 #define CONFIG_SYS_LONGHELP
 
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
 #define CONFIG_FPGA_COUNT	1
 #define	CONFIG_FPGA_XILINX
 #define	CONFIG_FPGA_SPARTAN3

include/configs/axs10x.h

@@ -80,7 +80,6 @@
  * Console configuration
  */
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 /*
  * Misc utility configuration

include/configs/bur_cfg_common.h

@@ -49,7 +49,5 @@
 
 /* Console I/O Buffer Size */
 #define CONFIG_SYS_CBSIZE		512
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 #endif	/* __BUR_CFG_COMMON_H__ */

include/configs/cm_t35.h

@@ -175,8 +175,6 @@
 #define CONFIG_TIMESTAMP
 #define CONFIG_SYS_AUTOLOAD		"no"
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
 
 #define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)	/* memtest */
 								/* works on */

include/configs/cm_t3517.h

@@ -181,8 +181,6 @@
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
 #define CONFIG_SYS_MAXARGS		32	/* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
 
 #define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0 + 0x02000000)
 

include/configs/cobra5272.h

@@ -169,8 +169,6 @@ from which user programs will be started */
 
 #define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
 
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
 /*
  *-----------------------------------------------------------------------------
  * End of user parameters to be customized

include/configs/colibri_pxa270.h

@@ -84,7 +84,6 @@
 #endif
 
 #undef	CONFIG_SYS_LONGHELP		/* Saves 10 KB */
-#define	CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 #define	CONFIG_SYS_DEVICE_NULLDEV	1
 #undef	CONFIG_CMDLINE_EDITING		/* Saves 2.5 KB */
 #undef	CONFIG_AUTO_COMPLETE		/* Saves 2.5 KB */

include/configs/controlcenterd.h

@@ -322,7 +322,6 @@
 #endif /* CONFIG_TRAILBLAZER */
 
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
 #ifndef CONFIG_TRAILBLAZER
 /*

include/configs/corenet_ds.h

@@ -603,7 +603,6 @@
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data

include/configs/cyrus.h

@@ -429,7 +429,6 @@
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data

include/configs/dragonboard410c.h

@@ -114,7 +114,6 @@ REFLASH(dragonboard/u-boot.img, 8)\
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_MAXARGS		64	/* max command args */
 
 #endif

include/configs/edb93xx.h

@@ -78,8 +78,6 @@
 
 #define CONFIG_SYS_LONGHELP			/* Enable "long" help in mon */
 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O buffer size */
-/* Boot argument buffer size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
 /* Serial port hardware configuration */
 #define CONFIG_PL010_SERIAL

include/configs/flea3.h

@@ -93,7 +93,6 @@
 #define CONFIG_SYS_CBSIZE	512	/* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	32	/* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 
 #define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x10000

include/configs/ge_bx50v3.h

@@ -233,8 +233,6 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_AUTO_COMPLETE
 
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
 #define CONFIG_SYS_MEMTEST_START       0x10000000
 #define CONFIG_SYS_MEMTEST_END         0x10010000
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

include/configs/hikey.h

@@ -107,7 +107,6 @@
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_MAXARGS		64	/* max command args */

include/configs/hsdk.h

@@ -73,7 +73,6 @@
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 /*
  * Misc utility configuration

include/configs/imx31_phycore.h

@@ -93,8 +93,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_MEMTEST_START	0  /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x10000

include/configs/integrator-common.h

@@ -13,7 +13,6 @@
 #define CONFIG_SYS_TIMERBASE		0x13000100	/* Timer1 */
 #define CONFIG_SYS_LOAD_ADDR		0x7fc0	/* default load address */
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size*/
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024) /* Size of malloc() pool */
 
 /* Serial port PL010/PL011 through the device model */

include/configs/ls1012a_common.h

@@ -107,7 +107,6 @@
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING		1
 #define CONFIG_AUTO_COMPLETE

include/configs/ls1021aiot.h

@@ -240,7 +240,6 @@
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 #define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_MEMINFO

include/configs/ls1021aqds.h

@@ -512,7 +512,6 @@ unsigned long get_board_ddr_clk(void);
  */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff

include/configs/ls1021atwr.h

@@ -489,7 +489,6 @@
  */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff

include/configs/ls1043a_common.h

@@ -330,7 +330,6 @@
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
 #define CONFIG_SYS_LONGHELP
 
 #ifndef SPL_NO_MISC

include/configs/ls1043aqds.h

@@ -383,7 +383,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_MISC_INIT_R
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff

include/configs/ls1046a_common.h

@@ -268,7 +268,6 @@
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
 #define CONFIG_SYS_LONGHELP
 
 #define CONFIG_AUTO_COMPLETE

include/configs/ls1046aqds.h

@@ -417,7 +417,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_MISC_INIT_R
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff

include/configs/ls2080a_common.h

@@ -216,7 +216,6 @@ unsigned long long get_qixis_addr(void);
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING		1
 #define CONFIG_AUTO_COMPLETE

include/configs/meson-gxbb-common.h

@@ -25,7 +25,6 @@
 #define GICD_BASE			0xc4301000
 #define GICC_BASE			0xc4302000
 
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 

include/configs/mx25pdk.h

@@ -199,6 +199,4 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_AUTO_COMPLETE
 
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
 #endif /* __CONFIG_H */

include/configs/mx31ads.h

@@ -95,7 +95,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
 #define CONFIG_SYS_MEMTEST_START	0		/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x10000

include/configs/mx31pdk.h

@@ -87,8 +87,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START	0x80000000

include/configs/mx35pdk.h

@@ -110,7 +110,6 @@
 #define CONFIG_CMDLINE_EDITING
 
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 
 #define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x10000

include/configs/mx51evk.h

@@ -175,7 +175,6 @@
  */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 
 #define CONFIG_SYS_MEMTEST_START       0x90000000
 #define CONFIG_SYS_MEMTEST_END         0x90010000

include/configs/mx53ard.h

@@ -162,8 +162,6 @@
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_AUTO_COMPLETE
 
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
 #define CONFIG_SYS_MEMTEST_START       0x70000000
 #define CONFIG_SYS_MEMTEST_END         0x70010000
 

include/configs/mx53cx9020.h

@@ -146,8 +146,6 @@
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
 
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-
 #define CONFIG_SYS_MEMTEST_START       0x70000000
 #define CONFIG_SYS_MEMTEST_END         0x70010000
 

include/configs/mx53evk.h

@@ -109,8 +109,6 @@
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_AUTO_COMPLETE
 
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
 #define CONFIG_SYS_MEMTEST_START       0x70000000
 #define CONFIG_SYS_MEMTEST_END         0x70010000
 

include/configs/mx53loco.h

@@ -156,8 +156,6 @@
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
 
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
 #define CONFIG_SYS_MEMTEST_START       0x70000000
 #define CONFIG_SYS_MEMTEST_END         0x70010000
 

include/configs/mx53smd.h

@@ -101,8 +101,6 @@
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_AUTO_COMPLETE
 
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
 #define CONFIG_SYS_MEMTEST_START       0x70000000
 #define CONFIG_SYS_MEMTEST_END         0x70010000
 

include/configs/mx6_common.h

@@ -64,7 +64,6 @@
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE	512
 #define CONFIG_SYS_MAXARGS	32
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
 #ifndef CONFIG_SYS_DCACHE_OFF
 #endif

include/configs/mx7_common.h

@@ -42,7 +42,6 @@
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE		512
 #define CONFIG_SYS_MAXARGS		32
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 #ifndef CONFIG_SYS_DCACHE_OFF
 #endif

include/configs/mx7ulp_evk.h

@@ -79,7 +79,6 @@
 #define CONFIG_SYS_CBSIZE		512
 
 #define CONFIG_SYS_MAXARGS		256
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 
 #define CONFIG_CMDLINE_EDITING