libfdt: Sync fdt_for_each_subnode() with upstream

The signature for this macro has changed. Bring in the upstream version and
adjust U-Boot's usages to suit.

Signed-off-by: Simon Glass <sjg@chromium.org>
Update to drivers/power/pmic/palmas.c:
Signed-off-by: Keerthy <j-keerthy@ti.com>

Change-Id: I6cc9021339bfe686f9df21d61a1095ca2b3776e8

arch/arm/mach-tegra/xusb-padctl-common.c

@@ -223,7 +223,7 @@ tegra_xusb_padctl_config_parse_dt(struct tegra_xusb_padctl *padctl,
 
 	config->name = fdt_get_name(fdt, node, NULL);
 
-	fdt_for_each_subnode(fdt, subnode, node) {
+	fdt_for_each_subnode(subnode, fdt, node) {
 		struct tegra_xusb_padctl_group *group;
 		int err;
 
@@ -253,7 +253,7 @@ static int tegra_xusb_padctl_parse_dt(struct tegra_xusb_padctl *padctl,
 		return err;
 	}
 
-	fdt_for_each_subnode(fdt, subnode, node) {
+	fdt_for_each_subnode(subnode, fdt, node) {
 		struct tegra_xusb_padctl_config *config = &padctl->config;
 
 		err = tegra_xusb_padctl_config_parse_dt(padctl, config, fdt,

common/image-fit.c

@@ -1026,7 +1026,7 @@ int fit_image_verify(const void *fit, int image_noffset)
 	}
 
 	/* Process all hash subnodes of the component image node */
-	fdt_for_each_subnode(fit, noffset, image_noffset) {
+	fdt_for_each_subnode(noffset, fit, image_noffset) {
 		const char *name = fit_get_name(fit, noffset, NULL);
 
 		/*

common/image-sig.c

@@ -212,7 +212,7 @@ static int fit_image_verify_sig(const void *fit, int image_noffset,
 	int ret;
 
 	/* Process all hash subnodes of the component image node */
-	fdt_for_each_subnode(fit, noffset, image_noffset) {
+	fdt_for_each_subnode(noffset, fit, image_noffset) {
 		const char *name = fit_get_name(fit, noffset, NULL);
 
 		if (!strncmp(name, FIT_SIG_NODENAME,
@@ -260,7 +260,7 @@ int fit_image_verify_required_sigs(const void *fit, int image_noffset,
 		return 0;
 	}
 
-	fdt_for_each_subnode(sig_blob, noffset, sig_node) {
+	fdt_for_each_subnode(noffset, sig_blob, sig_node) {
 		const char *required;
 		int ret;
 
@@ -393,7 +393,7 @@ static int fit_config_verify_sig(const void *fit, int conf_noffset,
 	int ret;
 
 	/* Process all hash subnodes of the component conf node */
-	fdt_for_each_subnode(fit, noffset, conf_noffset) {
+	fdt_for_each_subnode(noffset, fit, conf_noffset) {
 		const char *name = fit_get_name(fit, noffset, NULL);
 
 		if (!strncmp(name, FIT_SIG_NODENAME,
@@ -438,7 +438,7 @@ int fit_config_verify_required_sigs(const void *fit, int conf_noffset,
 		return 0;
 	}
 
-	fdt_for_each_subnode(sig_blob, noffset, sig_node) {
+	fdt_for_each_subnode(noffset, sig_blob, sig_node) {
 		const char *required;
 		int ret;
 

drivers/net/cpsw.c

@@ -1219,7 +1219,7 @@ static int cpsw_eth_ofdata_to_platdata(struct udevice *dev)
 	active_slave = fdtdec_get_int(fdt, node, "active_slave", 0);
 	priv->data.active_slave = active_slave;
 
-	fdt_for_each_subnode(fdt, subnode, node) {
+	fdt_for_each_subnode(subnode, fdt, node) {
 		int len;
 		const char *name;
 

drivers/net/keystone_net.c

@@ -990,7 +990,7 @@ static int ks2_eth_bind_slaves(struct udevice *dev, int gbe, int *gbe_0)
 	char *slave_name;
 
 	interfaces = fdt_subnode_offset(fdt, gbe, "interfaces");
-	fdt_for_each_subnode(fdt, slave, interfaces) {
+	fdt_for_each_subnode(slave, fdt, interfaces) {
 		int slave_no;
 
 		slave_no = fdtdec_get_int(fdt, slave, "slave-port", -ENOENT);
@@ -1015,7 +1015,7 @@ static int ks2_eth_bind_slaves(struct udevice *dev, int gbe, int *gbe_0)
 	}
 
 	sec_slave = fdt_subnode_offset(fdt, gbe, "secondary-slave-ports");
-	fdt_for_each_subnode(fdt, slave, sec_slave) {
+	fdt_for_each_subnode(slave, fdt, sec_slave) {
 		int slave_no;
 
 		slave_no = fdtdec_get_int(fdt, slave, "slave-port", -ENOENT);

drivers/net/mvpp2.c

@@ -4153,7 +4153,7 @@ static int mvpp2_base_bind(struct udevice *parent)
 		return -ENOENT;
 	}
 
-	fdt_for_each_subnode(blob, subnode, node) {
+	fdt_for_each_subnode(subnode, blob, node) {
 		/* Skip disabled ports */
 		if (!fdtdec_get_is_enabled(blob, subnode))
 			continue;

drivers/pci/pci_tegra.c

@@ -531,7 +531,7 @@ static int tegra_pcie_parse_dt(const void *fdt, int node, enum tegra_pci_id id,
 	}
 #endif
 
-	fdt_for_each_subnode(fdt, subnode, node) {
+	fdt_for_each_subnode(subnode, fdt, node) {
 		unsigned int index = 0, num_lanes = 0;
 		struct tegra_pcie_port *port;
 

drivers/phy/marvell/comphy_core.c

@@ -152,7 +152,7 @@ static int comphy_probe(struct udevice *dev)
 	}
 
 	lane = 0;
-	fdt_for_each_subnode(blob, subnode, node) {
+	fdt_for_each_subnode(subnode, blob, node) {
 		/* Skip disabled ports */
 		if (!fdtdec_get_is_enabled(blob, subnode))
 			continue;

drivers/pinctrl/meson/pinctrl-meson.c

@@ -154,7 +154,7 @@ int meson_pinctrl_probe(struct udevice *dev)
 		return -EINVAL;
 	}
 
-	fdt_for_each_subnode(gd->fdt_blob, node, dev->of_offset) {
+	fdt_for_each_subnode(node, gd->fdt_blob, dev->of_offset) {
 		if (fdt_getprop(gd->fdt_blob, node, "gpio-controller", &len)) {
 			gpio = node;
 			break;

drivers/power/pmic/palmas.c

@@ -52,7 +52,7 @@ static int palmas_bind(struct udevice *dev)
 	int node = dev->of_offset;
 	int subnode, len;
 
-	fdt_for_each_subnode(blob, subnode, node) {
+	fdt_for_each_subnode(subnode, blob, node) {
 		const char *name;
 		char *temp;
 

drivers/spi/fsl_qspi.c

@@ -1098,7 +1098,7 @@ static int fsl_qspi_ofdata_to_platdata(struct udevice *bus)
 	}
 
 	/* Count flash numbers */
-	fdt_for_each_subnode(blob, subnode, node)
+	fdt_for_each_subnode(subnode, blob, node)
 		++flash_num;
 
 	if (flash_num == 0) {

include/libfdt.h

@@ -176,24 +176,27 @@ int fdt_next_subnode(const void *fdt, int offset);
 /**
  * fdt_for_each_subnode - iterate over all subnodes of a parent
  *
+ * @node:	child node (int, lvalue)
+ * @fdt:	FDT blob (const void *)
+ * @parent:	parent node (int)
+ *
  * This is actually a wrapper around a for loop and would be used like so:
  *
- *	fdt_for_each_subnode(fdt, node, parent) {
- *		...
- *		use node
+ *	fdt_for_each_subnode(node, fdt, parent) {
+ *		Use node
  *		...
  *	}
  *
- * Note that this is implemented as a macro and node is used as iterator in
- * the loop. It should therefore be a locally allocated variable. The parent
- * variable on the other hand is never modified, so it can be constant or
- * even a literal.
+ *	if ((node < 0) && (node != -FDT_ERR_NOT_FOUND)) {
+ *		Error handling
+ *	}
+ *
+ * Note that this is implemented as a macro and @node is used as
+ * iterator in the loop. The parent variable be constant or even a
+ * literal.
  *
- * @fdt:	FDT blob (const void *)
- * @node:	child node (int)
- * @parent:	parent node (int)
  */
-#define fdt_for_each_subnode(fdt, node, parent)		\
+#define fdt_for_each_subnode(node, fdt, parent)		\
 	for (node = fdt_first_subnode(fdt, parent);	\
 	     node >= 0;					\
 	     node = fdt_next_subnode(fdt, node))

lib/fdtdec.c

@@ -836,7 +836,7 @@ int fdtdec_get_child_count(const void *blob, int node)
 	int subnode;
 	int num = 0;
 
-	fdt_for_each_subnode(blob, subnode, node)
+	fdt_for_each_subnode(subnode, blob, node)
 		num++;
 
 	return num;

lib/libfdt/fdt_overlay.c

@@ -146,7 +146,7 @@ static int overlay_adjust_node_phandles(void *fdto, int node,
 	if (!found && !ret)
 		return ret;
 
-	fdt_for_each_subnode(fdto, child, node)
+	fdt_for_each_subnode(child, fdto, node)
 		overlay_adjust_node_phandles(fdto, child, delta);
 
 	return 0;
@@ -248,7 +248,7 @@ static int overlay_update_local_node_references(void *fdto,
 		}
 	}
 
-	fdt_for_each_subnode(fdto, fixup_child, fixup_node) {
+	fdt_for_each_subnode(fixup_child, fdto, fixup_node) {
 		const char *fixup_child_name = fdt_get_name(fdto, fixup_child,
 							    NULL);
 		int tree_child;
@@ -511,7 +511,7 @@ static int overlay_apply_node(void *fdt, int target,
 			return ret;
 	}
 
-	fdt_for_each_subnode(fdto, node, fragment) {
+	fdt_for_each_subnode(node, fdto, fragment) {
 		const char *name = fdt_get_name(fdto, node, NULL);
 		int nnode;
 		int ret;
@@ -550,7 +550,7 @@ static int overlay_merge(void *dt, void *dto)
 {
 	int fragment;
 
-	fdt_for_each_subnode(dto, fragment, 0) {
+	fdt_for_each_subnode(fragment, dto, 0) {
 		int overlay;
 		int target;
 		int ret;