arm: socfpga: Enable build for Arria 10

Update Kconfig and Makefile to enable Arria 10.
Clean up Makefile and sorting *.o alphanumerically.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arch/arm/mach-socfpga/Kconfig

@@ -37,6 +37,9 @@ config TARGET_SOCFPGA_ARRIA5
 	bool
 	select TARGET_SOCFPGA_GEN5
 
+config TARGET_SOCFPGA_ARRIA10
+	bool
+
 config TARGET_SOCFPGA_CYCLONE5
 	bool
 	select TARGET_SOCFPGA_GEN5
@@ -49,6 +52,10 @@ choice
 	prompt "Altera SOCFPGA board select"
 	optional
 
+config TARGET_SOCFPGA_ARRIA10_SOCDK
+	bool "Altera SOCFPGA SoCDK (Arria 10)"
+	select TARGET_SOCFPGA_ARRIA10
+
 config TARGET_SOCFPGA_ARRIA5_SOCDK
 	bool "Altera SOCFPGA SoCDK (Arria V)"
 	select TARGET_SOCFPGA_ARRIA5
@@ -98,6 +105,7 @@ endchoice
 
 config SYS_BOARD
 	default "arria5-socdk" if TARGET_SOCFPGA_ARRIA5_SOCDK
+	default "arria10-socdk" if TARGET_SOCFPGA_ARRIA10_SOCDK
 	default "cyclone5-socdk" if TARGET_SOCFPGA_CYCLONE5_SOCDK
 	default "de0-nano-soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO
 	default "de1-soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC
@@ -111,6 +119,7 @@ config SYS_BOARD
 
 config SYS_VENDOR
 	default "altera" if TARGET_SOCFPGA_ARRIA5_SOCDK
+	default "altera" if TARGET_SOCFPGA_ARRIA10_SOCDK
 	default "altera" if TARGET_SOCFPGA_CYCLONE5_SOCDK
 	default "aries" if TARGET_SOCFPGA_ARIES_MCVEVK
 	default "ebv" if TARGET_SOCFPGA_EBV_SOCRATES
@@ -125,6 +134,7 @@ config SYS_SOC
 
 config SYS_CONFIG_NAME
 	default "socfpga_arria5_socdk" if TARGET_SOCFPGA_ARRIA5_SOCDK
+	default "socfpga_arria10_socdk" if TARGET_SOCFPGA_ARRIA10_SOCDK
 	default "socfpga_cyclone5_socdk" if TARGET_SOCFPGA_CYCLONE5_SOCDK
 	default "socfpga_de0_nano_soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO
 	default "socfpga_de1_soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC

arch/arm/mach-socfpga/Makefile

@@ -2,28 +2,48 @@
 # (C) Copyright 2000-2003
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
-# Copyright (C) 2012 Altera Corporation <www.altera.com>
+# Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
 #
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y	+= misc.o timer.o reset_manager.o clock_manager.o \
-	   fpga_manager.o board.o
+obj-y	+= board.o
+obj-y	+= clock_manager.o
+obj-y	+= fpga_manager.o
+obj-y	+= misc.o
+obj-y	+= reset_manager.o
+obj-y	+= timer.o
 
-obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += clock_manager_arria10.o \
-					pinmux_arria10.o	\
-					misc_arria10.o		\
-					reset_manager_arria10.o
+ifdef CONFIG_TARGET_SOCFPGA_GEN5
+obj-y	+= clock_manager_gen5.o
+obj-y	+= misc_gen5.o
+obj-y	+= reset_manager_gen5.o
+obj-y	+= scan_manager.o
+obj-y	+= system_manager_gen5.o
+obj-y	+= wrap_pll_config.o
+endif
 
-obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
+ifdef CONFIG_TARGET_SOCFPGA_ARRIA10
+obj-y	+= clock_manager_arria10.o
+obj-y	+= misc_arria10.o
+obj-y	+= pinmux_arria10.o
+obj-y	+= reset_manager_arria10.o
+endif
 
+ifdef CONFIG_SPL_BUILD
+obj-y	+= spl.o
+ifdef CONFIG_TARGET_SOCFPGA_GEN5
+obj-y	+= freeze_controller.o
+obj-y	+= wrap_iocsr_config.o
+obj-y	+= wrap_pinmux_config.o
+obj-y	+= wrap_sdram_config.o
+endif
+endif
+
+ifdef CONFIG_TARGET_SOCFPGA_GEN5
 # QTS-generated config file wrappers
-obj-$(CONFIG_TARGET_SOCFPGA_GEN5)	+= scan_manager.o wrap_pll_config.o \
-					   clock_manager_gen5.o reset_manager_gen5.o \
-					   misc_gen5.o system_manager_gen5.o
-obj-$(CONFIG_SPL_BUILD) += wrap_iocsr_config.o wrap_pinmux_config.o	\
-			   wrap_sdram_config.o
 CFLAGS_wrap_iocsr_config.o	+= -I$(srctree)/board/$(BOARDDIR)
 CFLAGS_wrap_pinmux_config.o	+= -I$(srctree)/board/$(BOARDDIR)
 CFLAGS_wrap_pll_config.o	+= -I$(srctree)/board/$(BOARDDIR)
 CFLAGS_wrap_sdram_config.o	+= -I$(srctree)/board/$(BOARDDIR)
+endif