arm: socfpga: stratix10: Add misc support for Stratix10 SoC

Add misc support such as EMAC and cpu info printout for Stratix SoC

Signed-off-by: Chin Liang See <chin.liang.see@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

arch/arm/mach-socfpga/Makefile

@@ -30,6 +30,7 @@ endif
 
 ifdef CONFIG_TARGET_SOCFPGA_STRATIX10
 obj-y	+= clock_manager_s10.o
+obj-y	+= misc_s10.o
 obj-y	+= reset_manager_s10.o
 obj-y	+= system_manager_s10.o
 obj-y	+= wrap_pinmux_config_s10.o

arch/arm/mach-socfpga/misc_s10.c

@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <altera.h>
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/system_manager.h>
+#include <asm/arch/misc.h>
+#include <asm/pl310.h>
+#include <linux/libfdt.h>
+
+#include <dt-bindings/reset/altr,rst-mgr-s10.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct socfpga_system_manager *sysmgr_regs =
+	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
+
+/*
+ * DesignWare Ethernet initialization
+ */
+#ifdef CONFIG_ETH_DESIGNWARE
+
+static u32 socfpga_phymode_setup(u32 gmac_index, const char *phymode)
+{
+	u32 modereg;
+
+	if (!phymode)
+		return -EINVAL;
+
+	if (!strcmp(phymode, "mii") || !strcmp(phymode, "gmii"))
+		modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
+	else if (!strcmp(phymode, "rgmii"))
+		modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
+	else if (!strcmp(phymode, "rmii"))
+		modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII;
+	else
+		return -EINVAL;
+
+	clrsetbits_le32(&sysmgr_regs->emac0 + gmac_index,
+			SYSMGR_EMACGRP_CTRL_PHYSEL_MASK,
+			modereg);
+
+	return 0;
+}
+
+static int socfpga_set_phymode(void)
+{
+	const void *fdt = gd->fdt_blob;
+	struct fdtdec_phandle_args args;
+	const char *phy_mode;
+	u32 gmac_index;
+	int nodes[2];	/* Max. 3 GMACs */
+	int ret, count;
+	int i, node;
+
+	count = fdtdec_find_aliases_for_id(fdt, "ethernet",
+					   COMPAT_ALTERA_SOCFPGA_DWMAC,
+					   nodes, ARRAY_SIZE(nodes));
+	for (i = 0; i < count; i++) {
+		node = nodes[i];
+		if (node <= 0)
+			continue;
+
+		ret = fdtdec_parse_phandle_with_args(fdt, node, "resets",
+						     "#reset-cells", 1, 0,
+						     &args);
+		if (ret || args.args_count != 1) {
+			debug("GMAC%i: Failed to parse DT 'resets'!\n", i);
+			continue;
+		}
+
+		gmac_index = args.args[0] - EMAC0_RESET;
+
+		phy_mode = fdt_getprop(fdt, node, "phy-mode", NULL);
+		ret = socfpga_phymode_setup(gmac_index, phy_mode);
+		if (ret) {
+			debug("GMAC%i: Failed to parse DT 'phy-mode'!\n", i);
+			continue;
+		}
+	}
+
+	return 0;
+}
+#else
+static int socfpga_set_phymode(void)
+{
+	return 0;
+};
+#endif
+
+/*
+ * Print CPU information
+ */
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	puts("CPU:   Intel FPGA SoCFPGA Platform (ARMv8 64bit Cortex-A53)\n");
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_MISC_INIT
+int arch_misc_init(void)
+{
+	char qspi_string[13];
+
+	sprintf(qspi_string, "<0x%08x>", cm_get_qspi_controller_clk_hz());
+	env_set("qspi_clock", qspi_string);
+
+	socfpga_set_phymode();
+	return 0;
+}
+#endif
+
+int arch_early_init_r(void)
+{
+	return 0;
+}
+
+void do_bridge_reset(int enable)
+{
+	socfpga_bridges_reset(enable);
+}