board: ls1043ardb: Add micro QE support for ls1043ardb

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

board/freescale/ls1043ardb/ls1043ardb.c

@@ -21,6 +21,10 @@
 #include <environment.h>
 #include <fsl_sec.h>
 #include "cpld.h"
+#ifdef CONFIG_U_QE
+#include <fsl_qe.h>
+#endif
+
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -113,6 +117,10 @@ int board_init(void)
 	enable_layerscape_ns_access();
 #endif
 
+#ifdef CONFIG_U_QE
+	u_qe_init();
+#endif
+
 	return 0;
 }
 

drivers/qe/qe.c

@@ -192,8 +192,7 @@ void qe_init(uint qe_base)
 #ifdef CONFIG_U_QE
 void u_qe_init(void)
 {
-	uint qe_base = CONFIG_SYS_IMMR + 0x01400000; /* QE immr base */
-	qe_immr = (qe_map_t *)qe_base;
+	qe_immr = (qe_map_t *)(CONFIG_SYS_IMMR + QE_IMMR_OFFSET);
 
 	u_qe_upload_firmware((const void *)CONFIG_SYS_QE_FW_ADDR);
 	out_be32(&qe_immr->iram.iready, QE_IRAM_READY);
@@ -204,9 +203,8 @@ void u_qe_init(void)
 void u_qe_resume(void)
 {
 	qe_map_t *qe_immrr;
-	uint qe_base = CONFIG_SYS_IMMR + QE_IMMR_OFFSET; /* QE immr base */
-	qe_immrr = (qe_map_t *)qe_base;
 
+	qe_immrr = (qe_map_t *)(CONFIG_SYS_IMMR + QE_IMMR_OFFSET);
 	u_qe_firmware_resume((const void *)CONFIG_SYS_QE_FW_ADDR, qe_immrr);
 	out_be32(&qe_immrr->iram.iready, QE_IRAM_READY);
 }

include/configs/ls1043ardb.h

@@ -268,6 +268,13 @@
 #define CONFIG_ETHPRIME			"FM1@DTSEC3"
 #endif
 
+/* QE */
+#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
+	!defined(CONFIG_QSPI_BOOT)
+#define CONFIG_U_QE
+#endif
+#define CONFIG_SYS_QE_FW_ADDR     0x60600000
+
 /* USB */
 #define CONFIG_HAS_FSL_XHCI_USB
 #ifdef CONFIG_HAS_FSL_XHCI_USB