dm: gpio: vf610: Add GPIO driver support

Add GPIO driver support to Freescale VF610

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>

arch/arm/imx-common/iomux-v3.c

@@ -92,3 +92,29 @@ void imx_iomux_set_gpr_register(int group, int start_bit,
 	reg |= (value << start_bit);
 	writel(reg, base + group * 4);
 }
+
+#ifdef CONFIG_IOMUX_SHARE_CONF_REG
+void imx_iomux_gpio_set_direction(unsigned int gpio,
+				unsigned int direction)
+{
+	u32 reg;
+	/*
+	 * Only on Vybrid the input/output buffer enable flags
+	 * are part of the shared mux/conf register.
+	 */
+	reg = readl(base + (gpio << 2));
+
+	if (direction)
+		reg |= 0x2;
+	else
+		reg &= ~0x2;
+
+	writel(reg, base + (gpio << 2));
+}
+
+void imx_iomux_gpio_get_function(unsigned int gpio, u32 *gpio_state)
+{
+	*gpio_state = readl(base + (gpio << 2)) &
+		((0X07 << PAD_MUX_MODE_SHIFT) | PAD_CTL_OBE_IBE_ENABLE);
+}
+#endif

arch/arm/include/asm/arch-vf610/gpio.h

@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2015
+ * Bhuvanchandra DV, Toradex, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef __ASM_ARCH_VF610_GPIO_H
+#define __ASM_ARCH_VF610_GPIO_H
+
+#define VYBRID_GPIO_COUNT		32
+#define VF610_GPIO_DIRECTION_IN	0x0
+#define VF610_GPIO_DIRECTION_OUT	0x1
+
+/* GPIO registers */
+struct vybrid_gpio_regs {
+	u32 gpio_pdor;
+	u32 gpio_psor;
+	u32 gpio_pcor;
+	u32 gpio_ptor;
+	u32 gpio_pdir;
+};
+
+struct vybrid_gpio_platdata {
+	unsigned int chip;
+	u32 base;
+	const char *port_name;
+};
+#endif	/* __ASM_ARCH_VF610_GPIO_H */

arch/arm/include/asm/arch-vf610/imx-regs.h

@@ -81,6 +81,11 @@
 #define VREG_DIG_BASE_ADDR	(AIPS0_BASE_ADDR + 0x0006D000)
 #define SRC_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0006E000)
 #define CMU_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0006F000)
+#define GPIO0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x000FF000)
+#define GPIO1_BASE_ADDR		(AIPS0_BASE_ADDR + 0x000FF040)
+#define GPIO2_BASE_ADDR		(AIPS0_BASE_ADDR + 0x000FF080)
+#define GPIO3_BASE_ADDR		(AIPS0_BASE_ADDR + 0x000FF0C0)
+#define GPIO4_BASE_ADDR		(AIPS0_BASE_ADDR + 0x000FF100)
 
 /* AIPS 1 */
 #define OCOTP_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00025000)

arch/arm/include/asm/imx-common/iomux-v3.h

@@ -187,6 +187,12 @@ void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
 */
 void imx_iomux_set_gpr_register(int group, int start_bit,
 					 int num_bits, int value);
+#ifdef CONFIG_IOMUX_SHARE_CONF_REG
+void imx_iomux_gpio_set_direction(unsigned int gpio,
+				unsigned int direction);
+void imx_iomux_gpio_get_function(unsigned int gpio,
+				u32 *gpio_state);
+#endif
 
 /* macros for declaring and using pinmux array */
 #if defined(CONFIG_MX6QDL)

drivers/gpio/Kconfig

@@ -35,3 +35,10 @@ config SANDBOX_GPIO_COUNT
 	  are specified using the device tree. But you can also have a number
 	  of 'anonymous' GPIOs that do not belong to any device or bank.
 	  Select a suitable value depending on your needs.
+
+config VYBRID_GPIO
+	bool "Vybrid GPIO driver"
+	depends on DM
+	default n
+	help
+	  Say yes here to support Vybrid vf610 GPIOs.

drivers/gpio/Makefile

@@ -45,3 +45,4 @@ obj-$(CONFIG_SUNXI_GPIO)	+= sunxi_gpio.o
 obj-$(CONFIG_LPC32XX_GPIO)	+= lpc32xx_gpio.o
 obj-$(CONFIG_STM32_GPIO)	+= stm32_gpio.o
 obj-$(CONFIG_ZYNQ_GPIO)		+= zynq_gpio.o
+obj-$(CONFIG_VYBRID_GPIO)	+= vybrid_gpio.o

drivers/gpio/vybrid_gpio.c

@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) 2015
+ * Bhuvanchandra DV, Toradex, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/io.h>
+#include <malloc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct vybrid_gpios {
+	unsigned int chip;
+	struct vybrid_gpio_regs *reg;
+};
+
+static int vybrid_gpio_direction_input(struct udevice *dev, unsigned gpio)
+{
+	const struct vybrid_gpios *gpios = dev_get_priv(dev);
+
+	gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
+	imx_iomux_gpio_set_direction(gpio, VF610_GPIO_DIRECTION_IN);
+
+	return 0;
+}
+
+static int vybrid_gpio_direction_output(struct udevice *dev, unsigned gpio,
+					 int value)
+{
+	const struct vybrid_gpios *gpios = dev_get_priv(dev);
+
+	gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
+	gpio_set_value(gpio, value);
+	imx_iomux_gpio_set_direction(gpio, VF610_GPIO_DIRECTION_OUT);
+
+	return 0;
+}
+
+static int vybrid_gpio_get_value(struct udevice *dev, unsigned gpio)
+{
+	const struct vybrid_gpios *gpios = dev_get_priv(dev);
+
+	return ((readl(&gpios->reg->gpio_pdir) & (1 << gpio))) ? 1 : 0;
+}
+
+static int vybrid_gpio_set_value(struct udevice *dev, unsigned gpio,
+				  int value)
+{
+	const struct vybrid_gpios *gpios = dev_get_priv(dev);
+	if (value)
+		writel((1 << gpio), &gpios->reg->gpio_psor);
+	else
+		writel((1 << gpio), &gpios->reg->gpio_pcor);
+
+	return 0;
+}
+
+static int vybrid_gpio_get_function(struct udevice *dev, unsigned gpio)
+{
+	const struct vybrid_gpios *gpios = dev_get_priv(dev);
+	u32 g_state = 0;
+
+	gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
+
+	imx_iomux_gpio_get_function(gpio, &g_state);
+
+	if (((g_state & (0x07 << PAD_MUX_MODE_SHIFT)) >> PAD_MUX_MODE_SHIFT) > 0)
+		return GPIOF_FUNC;
+	if (g_state & PAD_CTL_OBE_ENABLE)
+		return GPIOF_OUTPUT;
+	if (g_state & PAD_CTL_IBE_ENABLE)
+		return GPIOF_INPUT;
+	if (!(g_state & PAD_CTL_OBE_IBE_ENABLE))
+		return GPIOF_UNUSED;
+
+	return GPIOF_UNKNOWN;
+}
+
+static const struct dm_gpio_ops gpio_vybrid_ops = {
+	.direction_input	= vybrid_gpio_direction_input,
+	.direction_output	= vybrid_gpio_direction_output,
+	.get_value		= vybrid_gpio_get_value,
+	.set_value		= vybrid_gpio_set_value,
+	.get_function		= vybrid_gpio_get_function,
+};
+
+static int vybrid_gpio_probe(struct udevice *dev)
+{
+	struct vybrid_gpios *gpios = dev_get_priv(dev);
+	struct vybrid_gpio_platdata *plat = dev_get_platdata(dev);
+	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+	uc_priv->bank_name = plat->port_name;
+	uc_priv->gpio_count = VYBRID_GPIO_COUNT;
+	gpios->reg = (struct vybrid_gpio_regs *)plat->base;
+	gpios->chip = plat->chip;
+
+	return 0;
+}
+
+static int vybrid_gpio_bind(struct udevice *dev)
+{
+	struct vybrid_gpio_platdata *plat = dev->platdata;
+	fdt_addr_t base_addr;
+
+	if (plat)
+		return 0;
+
+	base_addr = dev_get_addr(dev);
+	if (base_addr == FDT_ADDR_T_NONE)
+		return -ENODEV;
+
+	/*
+	* TODO:
+	* When every board is converted to driver model and DT is
+	* supported, this can be done by auto-alloc feature, but
+	* not using calloc to alloc memory for platdata.
+	*/
+	plat = calloc(1, sizeof(*plat));
+	if (!plat)
+		return -ENOMEM;
+
+	plat->base = base_addr;
+	plat->chip = dev->req_seq;
+	plat->port_name = fdt_get_name(gd->fdt_blob, dev->of_offset, NULL);
+	dev->platdata = plat;
+
+	return 0;
+}
+
+#ifndef CONFIG_OF_CONTROL
+static const struct vybrid_gpio_platdata vybrid_gpio[] = {
+	{0, GPIO0_BASE_ADDR, "GPIO0 "},
+	{1, GPIO1_BASE_ADDR, "GPIO1 "},
+	{2, GPIO2_BASE_ADDR, "GPIO2 "},
+	{3, GPIO3_BASE_ADDR, "GPIO3 "},
+	{4, GPIO4_BASE_ADDR, "GPIO4 "},
+};
+
+U_BOOT_DEVICES(vybrid_gpio) = {
+	{ "gpio_vybrid", &vybrid_gpio[0] },
+	{ "gpio_vybrid", &vybrid_gpio[1] },
+	{ "gpio_vybrid", &vybrid_gpio[2] },
+	{ "gpio_vybrid", &vybrid_gpio[3] },
+	{ "gpio_vybrid", &vybrid_gpio[4] },
+};
+#endif
+
+static const struct udevice_id vybrid_gpio_ids[] = {
+	{ .compatible = "fsl,vf610-gpio" },
+	{ }
+};
+
+U_BOOT_DRIVER(gpio_vybrid) = {
+	.name	= "gpio_vybrid",
+	.id	= UCLASS_GPIO,
+	.ops	= &gpio_vybrid_ops,
+	.probe	= vybrid_gpio_probe,
+	.priv_auto_alloc_size = sizeof(struct vybrid_gpios),
+	.of_match = vybrid_gpio_ids,
+	.bind	= vybrid_gpio_bind,
+};