|
@@ -493,6 +493,33 @@ config CFB_CONSOLE_ANSI
|
|
|
erase functions and limited graphics rendition control). Normal
|
|
|
output from U-Boot will pass through this filter.
|
|
|
|
|
|
+config VIDEO_CT69000
|
|
|
+ bool "Enable Chips & Technologies 69000 video driver"
|
|
|
+ depends on VIDEO
|
|
|
+ help
|
|
|
+ This enables a frame buffer driver for the Chips & Technologies
|
|
|
+ ct69000, a fairly old graphics device (circa 2000) which is used
|
|
|
+ on some hardware. It operates over the ISA bus, and supports
|
|
|
+ some acceleration features.
|
|
|
+
|
|
|
+ For the CT69000 and SMI_LYNXEM drivers, videomode is
|
|
|
+ selected via environment 'videomode'. Two different ways
|
|
|
+ are possible:
|
|
|
+ - "videomode=num" 'num' is a standard LiLo mode numbers.
|
|
|
+ Following standard modes are supported (* is default):
|
|
|
+
|
|
|
+ Colors 640x480 800x600 1024x768 1152x864 1280x1024
|
|
|
+ -------------+---------------------------------------------
|
|
|
+ 8 bits | 0x301* 0x303 0x305 0x161 0x307
|
|
|
+ 15 bits | 0x310 0x313 0x316 0x162 0x319
|
|
|
+ 16 bits | 0x311 0x314 0x317 0x163 0x31A
|
|
|
+ 24 bits | 0x312 0x315 0x318 ? 0x31B
|
|
|
+ -------------+---------------------------------------------
|
|
|
+ (i.e. setenv videomode 317; saveenv; reset;)
|
|
|
+
|
|
|
+ - "videomode=bootargs" all the video parameters are parsed
|
|
|
+ from the bootargs. (See drivers/video/videomodes.c)
|
|
|
+
|
|
|
config LCD
|
|
|
bool "Enable legacy LCD support"
|
|
|
help
|