Convert CONFIG_TWL4030_LED et al to Kconfig

This converts the following to Kconfig:
   CONFIG_TWL4030_LED
   CONFIG_TWL4030_INPUT

This also removes dead references to:
   CONFIG_TWL4030_KEYPAD

Signed-off-by: Adam Ford <aford173@gmail.com>

configs/cairo_defconfig

@@ -27,6 +27,7 @@ CONFIG_CMD_SPI=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SPL_NAND_SIMPLE=y

configs/cm_t35_defconfig

@@ -39,6 +39,7 @@ CONFIG_LED_STATUS_BIT=186
 CONFIG_LED_STATUS_STATE=2
 CONFIG_LED_STATUS_BOOT_ENABLE=y
 CONFIG_LED_STATUS_BOOT=0
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_NAND=y

configs/devkit8000_defconfig

@@ -25,6 +25,7 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nand0=nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs)"
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y

configs/nokia_rx51_defconfig

@@ -22,6 +22,7 @@ CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_FAT=y
 # CONFIG_NET is not set
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_CONS_INDEX=3
 CONFIG_SYS_NS16550=y

configs/omap3_beagle_defconfig

@@ -50,6 +50,7 @@ CONFIG_LED_STATUS_BOOT=1
 CONFIG_LED_STATUS_GREEN_ENABLE=y
 CONFIG_LED_STATUS_GREEN=2
 CONFIG_LED_STATUS_CMD=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y

configs/omap3_ha_defconfig

@@ -25,6 +25,7 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nand0=nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs)"
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y

configs/omap3_overo_defconfig

@@ -31,6 +31,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(xloader),1792k(u-boot),256k(environ),8m(linux),-(rootfs)"
 CONFIG_CMD_UBI=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y

configs/omap3_pandora_defconfig

@@ -25,6 +25,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(xloader),1920k(uboot),128k(uboot-env),10m(boot),-(rootfs)"
 CONFIG_CMD_UBI=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y

configs/omap3_zoom1_defconfig

@@ -22,6 +22,7 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nand0=nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs)"
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y

configs/sniper_defconfig

@@ -26,6 +26,7 @@ CONFIG_FASTBOOT_BUF_SIZE=0x2000000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_SYS_OMAP24_I2C_SPEED=400000
+CONFIG_TWL4030_INPUT=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_CONS_INDEX=3
 CONFIG_SYS_NS16550=y

configs/tao3530_defconfig

@@ -25,6 +25,7 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nand0=nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs)"
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y

configs/tricorder_defconfig

@@ -34,6 +34,7 @@ CONFIG_LED_STATUS2=y
 CONFIG_LED_STATUS_BIT2=4
 CONFIG_LED_STATUS_STATE2=2
 CONFIG_LED_STATUS_CMD=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SPL_NAND_SIMPLE=y

configs/tricorder_flash_defconfig

@@ -33,6 +33,7 @@ CONFIG_LED_STATUS2=y
 CONFIG_LED_STATUS_BIT2=4
 CONFIG_LED_STATUS_STATE2=2
 CONFIG_LED_STATUS_CMD=y
+CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SPL_NAND_SIMPLE=y

drivers/input/Kconfig

@@ -24,3 +24,8 @@ config I8042_KEYB
 	  driver handles English and German keyboards - set the environment
 	  variable 'keymap' to "de" to select German. Keyboard repeat is
 	  handled by the keyboard itself.
+
+config TWL4030_INPUT
+	bool "Enable TWL4030 Input controller"
+	help
+	  Enable TWL4030 Input controller

drivers/misc/Kconfig

@@ -195,6 +195,11 @@ config TEGRA186_BPMP
 	  can make requests to the BPMP. This driver is similar to an MFD
 	  driver in the Linux kernel.
 
+config TWL4030_LED
+	bool "Enable TWL4030 LED controller"
+	help
+	  Enable this to add support for the TWL4030 LED controller.
+
 config WINBOND_W83627
 	bool "Enable Winbond Super I/O driver"
 	help

include/configs/cm_t35.h

@@ -82,7 +82,6 @@
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_LED
 
 /*
  * Board NAND Info.

include/configs/devkit8000.h

@@ -54,7 +54,6 @@
 #undef	CONFIG_DM9000_DEBUG
 
 /* TWL4030 */
-#define CONFIG_TWL4030_LED		1
 
 /* Board NAND Info */
 #define CONFIG_JFFS2_NAND

include/configs/nokia_rx51.h

@@ -92,8 +92,6 @@
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_LED
-#define CONFIG_TWL4030_KEYPAD
 
 #define GPIO_SLIDE			71
 

include/configs/omap3_beagle.h

@@ -60,7 +60,6 @@
 /* DSS Support */
 
 /* TWL4030 LED Support */
-#define CONFIG_TWL4030_LED
 
 /* Environment */
 #define CONFIG_ENV_SIZE                 SZ_128K

include/configs/omap3_cairo.h

@@ -46,7 +46,6 @@
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_LED		1
 
 /*
  * Board NAND Info.

include/configs/omap3_overo.h

@@ -29,7 +29,6 @@
 /* I2C Support */
 
 /* TWL4030 LED */
-#define CONFIG_TWL4030_LED
 
 /* USB EHCI */
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	183

include/configs/omap3_pandora.h

@@ -24,7 +24,6 @@
  */
 
 /* TWL4030 LED */
-#define CONFIG_TWL4030_LED
 
 /*
  * NS16550 Configuration

include/configs/omap3_zoom1.h

@@ -48,7 +48,6 @@
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_LED		1
 
 /*
  * Board NAND Info.

include/configs/sniper.h

@@ -60,8 +60,6 @@
  * Input
  */
 
-#define CONFIG_TWL4030_INPUT
-
 /*
  * SPL
  */

include/configs/tao3530.h

@@ -63,7 +63,6 @@
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_LED
 
 /*
  * Board NAND Info.

include/configs/tricorder.h

@@ -60,7 +60,6 @@
 #define CONFIG_SYS_EEPROM_BUS_NUM	1
 
 /* TWL4030 */
-#define CONFIG_TWL4030_LED
 
 /* Board NAND Info */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */

scripts/config_whitelist.txt

@@ -4497,9 +4497,6 @@ CONFIG_TULIP_FIX_DAVICOM
 CONFIG_TULIP_SELECT_MEDIA
 CONFIG_TULIP_USE_IO
 CONFIG_TUXX1
-CONFIG_TWL4030_INPUT
-CONFIG_TWL4030_KEYPAD
-CONFIG_TWL4030_LED
 CONFIG_TWL6030_INPUT
 CONFIG_TWL6030_POWER
 CONFIG_TWR