Move default y configs out of arch/board Kconfig

Some archs/boards specify their own default by pre-defining the config
which causes the Kconfig system to mix up the order of the configs in
the defconfigs... This will cause merge pain if allowed to proliferate.

Remove the configs that behave this way from the archs.

A few configs still remain, but that is because they only exist as
defaults and do not have a proper Kconfig entry. Those appear to be:

SPIFLASH
DISPLAY_BOARDINFO

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates,
drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM]
Signed-off-by: Tom Rini <trini@konsulko.com>

arch/arc/Kconfig

@@ -4,9 +4,6 @@ menu "ARC architecture"
 config SYS_ARCH
 	default "arc"
 
-config USE_PRIVATE_LIBGCC
-	default y
-
 config SYS_CPU
 	default "arcv1" if ISA_ARCOMPACT
 	default "arcv2" if ISA_ARCV2

arch/arm/cpu/armv7/exynos/Kconfig

@@ -74,9 +74,6 @@ endchoice
 config SYS_SOC
 	default "exynos"
 
-config DM_USB
-	default y
-
 source "board/samsung/smdkv310/Kconfig"
 source "board/samsung/trats/Kconfig"
 source "board/samsung/universal_c210/Kconfig"

arch/arm/mach-bcm283x/Kconfig

@@ -15,9 +15,6 @@ config TARGET_RPI_2
 
 endchoice
 
-config PHYS_TO_BUS
-	default y
-
 config SYS_BOARD
 	default "rpi" if TARGET_RPI
 	default "rpi_2" if TARGET_RPI_2

arch/arm/mach-tegra/Kconfig

@@ -21,18 +21,6 @@ endchoice
 config SYS_MALLOC_F_LEN
 	default 0x1800
 
-config USE_PRIVATE_LIBGCC
-	default y
-
-config DM_USB
-	default y
-
-config SPL_DM
-	default y
-
-config SPL_DISABLE_OF_CONTROL
-	default y
-
 source "arch/arm/mach-tegra/tegra20/Kconfig"
 source "arch/arm/mach-tegra/tegra30/Kconfig"
 source "arch/arm/mach-tegra/tegra114/Kconfig"

arch/mips/Kconfig

@@ -8,9 +8,6 @@ config SYS_CPU
 	default "mips32" if CPU_MIPS32_R1 || CPU_MIPS32_R2
 	default "mips64" if CPU_MIPS64_R1 || CPU_MIPS64_R2
 
-config USE_PRIVATE_LIBGCC
-	default y
-
 choice
 	prompt "Target select"
 	optional

arch/sh/Kconfig

@@ -125,9 +125,6 @@ config SYS_CPU
 	default "sh3" if CPU_SH3
 	default "sh4" if CPU_SH4
 
-config USE_PRIVATE_LIBGCC
-	default y
-
 source "board/alphaproject/ap_sh4a_4a/Kconfig"
 source "board/espt/Kconfig"
 source "board/mpr2/Kconfig"

arch/x86/Kconfig

@@ -4,12 +4,6 @@ menu "x86 architecture"
 config SYS_ARCH
 	default "x86"
 
-config USE_PRIVATE_LIBGCC
-	default y
-
-config SYS_VSNPRINTF
-	default y
-
 choice
 	prompt "Mainboard vendor"
 	default VENDOR_EMULATION
@@ -335,13 +329,4 @@ config PCIE_ECAM_BASE
 	  assigned to PCI devices - i.e. the memory and prefetch regions, as
 	  passed to pci_set_region().
 
-config BOOTSTAGE
-	default y
-
-config BOOTSTAGE_REPORT
-	default y
-
-config CMD_BOOTSTAGE
-	default y
-
 endmenu

board/Arcturus/ucp1020/Kconfig

@@ -12,14 +12,6 @@ config SYS_CONFIG_NAME
 	string
 	default "UCP1020"
 
-config SPI_FLASH
-	bool
-	default y
-
-config SPI_PCI
-	bool
-	default y
-
 choice
 	prompt "Target image select"
 

board/sunxi/Kconfig

@@ -566,25 +566,4 @@ config GMAC_TX_DELAY
 	---help---
 	Set the GMAC Transmit Clock Delay Chain value.
 
-config SYS_MALLOC_CLEAR_ON_INIT
-	default n
-
-config NETDEVICES
-	default y
-
-config DM_ETH
-	default y
-
-config DM_SERIAL
-	default y
-
-config DM_USB
-	default y if !USB_MUSB_SUNXI
-
-config CMD_SETEXPR
-	default y
-
-config CMD_NET
-	default y
-
 endif

configs/A10-OLinuXino-Lime_defconfig

@@ -5,5 +5,13 @@ CONFIG_DRAM_CLK=480
 CONFIG_DRAM_EMR1=4
 CONFIG_SYS_CLK_FREQ=912000000
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/A10s-OLinuXino-M_defconfig

@@ -7,5 +7,13 @@ CONFIG_MMC1_CD_PIN="PG13"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=1
 CONFIG_USB1_VBUS_PIN="PB10"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/A13-OLinuXinoM_defconfig

@@ -11,5 +11,13 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo
 CONFIG_VIDEO_LCD_POWER="PB10"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/A13-OLinuXino_defconfig

@@ -12,5 +12,13 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/A20-OLinuXino-Lime2_defconfig

@@ -6,6 +6,14 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_USB0_VBUS_PIN="PC17"
 CONFIG_USB0_VBUS_DET="PH5"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/A20-OLinuXino-Lime_defconfig

@@ -3,6 +3,14 @@ CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=480
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/A20-OLinuXino_MICRO_defconfig

@@ -7,6 +7,14 @@ CONFIG_MMC3_CD_PIN="PH11"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=3
 CONFIG_VIDEO_VGA=y
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/Ainol_AW1_defconfig

@@ -13,5 +13,11 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-ainol-aw1"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y

configs/Ampe_A76_defconfig

@@ -12,5 +12,11 @@ CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y

configs/Auxtek-T004_defconfig

@@ -4,5 +4,13 @@ CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=432
 CONFIG_USB1_VBUS_PIN="PG13"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/B4420QDS_NAND_defconfig

@@ -5,3 +5,4 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/B4420QDS_SPIFLASH_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_B4860QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/B4420QDS_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_B4860QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/B4860QDS_NAND_defconfig

@@ -5,3 +5,4 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/B4860QDS_SECURE_BOOT_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_B4860QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,SECURE_BOOT"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/B4860QDS_SPIFLASH_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_B4860QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/B4860QDS_SRIO_PCIE_BOOT_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_B4860QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/B4860QDS_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_B4860QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9131RDB_NAND_SYSCLK100_defconfig

@@ -5,3 +5,4 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,NAND,SYS_CLK_100"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9131RDB_NAND_defconfig

@@ -5,3 +5,4 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,NAND"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9131RDB=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,SPIFLASH,SYS_CLK_100"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9131RDB_SPIFLASH_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9131RDB=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,SPIFLASH"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND_SECBOOT,SYS_CLK_100_DDR_100,SECURE_BOOT"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9132QDS_NAND_DDRCLK100_defconfig

@@ -5,3 +5,4 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND,SYS_CLK_100_DDR_100"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND_SECBOOT,SYS_CLK_100_DDR_133,SECURE_BOOT"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9132QDS_NAND_DDRCLK133_defconfig

@@ -5,3 +5,4 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND,SYS_CLK_100_DDR_133"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_100,SECURE_BOOT"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9132QDS_NOR_DDRCLK100_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_100"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_133,SECURE_BOOT"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9132QDS_NOR_DDRCLK133_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_133"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_100,SECURE_BOOT"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_100"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133,SECURE_BOOT"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100,SECURE_BOOT"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133,SECURE_BOOT"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
 CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/Bananapi_defconfig

@@ -4,6 +4,14 @@ CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=432
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/Bananapro_defconfig

@@ -6,6 +6,14 @@ CONFIG_USB1_VBUS_PIN="PH0"
 CONFIG_USB2_VBUS_PIN="PH1"
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/C29XPCIE_NAND_defconfig

@@ -6,3 +6,4 @@ CONFIG_TPL=y
 CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,NAND"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/C29XPCIE_NOR_SECBOOT_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_C29XPCIE=y
 CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SECURE_BOOT"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_C29XPCIE=y
 CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SPIFLASH,SECURE_BOOT"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/C29XPCIE_SPIFLASH_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_C29XPCIE=y
 CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SPIFLASH"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/C29XPCIE_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_C29XPCIE=y
 CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/CPCI4052_defconfig

@@ -1,7 +1,7 @@
 CONFIG_PPC=y
-CONFIG_CMD_NET=y
 CONFIG_4xx=y
 CONFIG_TARGET_CPCI4052=y
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
 CONFIG_AUTOBOOT_STOP_STR=" "
+CONFIG_CMD_NET=y

configs/CSQ_CS908_defconfig

@@ -5,8 +5,16 @@ CONFIG_DRAM_CLK=432
 CONFIG_USB1_VBUS_PIN=""
 CONFIG_USB2_VBUS_PIN=""
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-cs908"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3300
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/Chuwi_V7_CW0825_defconfig

@@ -12,8 +12,14 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-chuwi-v7-cw0825"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
 CONFIG_VIDEO_LCD_SPI_CS="PA0"
 CONFIG_VIDEO_LCD_SPI_SCLK="PA1"
 CONFIG_VIDEO_LCD_SPI_MOSI="PA2"

configs/Colombus_defconfig

@@ -5,7 +5,15 @@ CONFIG_DRAM_CLK=240
 CONFIG_DRAM_ZQ=251
 CONFIG_USB1_VBUS_PIN=""
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
 CONFIG_AXP221_ALDO1_VOLT=3300
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/Cubieboard2_defconfig

@@ -4,6 +4,14 @@ CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=480
 CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/Cubieboard_defconfig

@@ -3,5 +3,13 @@ CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN4I=y
 CONFIG_DRAM_CLK=480
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/Cubietruck_defconfig

@@ -5,6 +5,14 @@ CONFIG_DRAM_CLK=432
 CONFIG_VIDEO_VGA=y
 CONFIG_GMAC_TX_DELAY=1
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/Et_q8_v1_6_defconfig

@@ -13,7 +13,13 @@ CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-et-q8-v1.6"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3000

configs/Hummingbird_A31_defconfig

@@ -7,7 +7,15 @@ CONFIG_USB2_VBUS_PIN=""
 CONFIG_VIDEO_VGA_VIA_LCD=y
 CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-hummingbird"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
 CONFIG_AXP221_ALDO1_VOLT=3300
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/Hyundai_A7HD_defconfig

@@ -14,5 +14,11 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-hyundai-a7hd"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y

configs/Ippo_q8h_v1_2_a33_1024x600_defconfig

@@ -13,7 +13,13 @@ CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3000

configs/Ippo_q8h_v1_2_defconfig

@@ -13,7 +13,13 @@ CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v1.2"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3000

configs/Ippo_q8h_v5_defconfig

@@ -13,7 +13,13 @@ CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3000

configs/Linksprite_pcDuino3_Nano_defconfig

@@ -6,6 +6,14 @@ CONFIG_DRAM_ZQ=122
 CONFIG_USB1_VBUS_PIN="PH11"
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3-nano"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/Linksprite_pcDuino3_defconfig

@@ -4,6 +4,14 @@ CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=480
 CONFIG_DRAM_ZQ=122
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/Linksprite_pcDuino_defconfig

@@ -3,5 +3,13 @@ CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN4I=y
 CONFIG_DRAM_CLK=408
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/M52277EVB_defconfig

@@ -1,3 +1,4 @@
 CONFIG_M68K=y
 CONFIG_TARGET_M52277EVB=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_SPANSION_BOOT,SYS_TEXT_BASE=0x00000000"
+CONFIG_SPI_FLASH=y

configs/M52277EVB_stmicro_defconfig

@@ -1,3 +1,4 @@
 CONFIG_M68K=y
 CONFIG_TARGET_M52277EVB=y
 CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x43E00000"
+CONFIG_SPI_FLASH=y

configs/M54418TWR_defconfig

@@ -2,3 +2,4 @@ CONFIG_M68K=y
 CONFIG_TARGET_M54418TWR=y
 CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000"
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/M54418TWR_nand_mii_defconfig

@@ -2,3 +2,4 @@ CONFIG_M68K=y
 CONFIG_TARGET_M54418TWR=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000"
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/M54418TWR_nand_rmii_defconfig

@@ -2,3 +2,4 @@ CONFIG_M68K=y
 CONFIG_TARGET_M54418TWR=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000"
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/M54418TWR_nand_rmii_lowfreq_defconfig

@@ -2,3 +2,4 @@ CONFIG_M68K=y
 CONFIG_TARGET_M54418TWR=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,LOW_MCFCLK,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000"
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/M54418TWR_serial_mii_defconfig

@@ -2,3 +2,4 @@ CONFIG_M68K=y
 CONFIG_TARGET_M54418TWR=y
 CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000"
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/M54418TWR_serial_rmii_defconfig

@@ -2,3 +2,4 @@ CONFIG_M68K=y
 CONFIG_TARGET_M54418TWR=y
 CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000"
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/M54451EVB_defconfig

@@ -2,3 +2,4 @@ CONFIG_M68K=y
 CONFIG_TARGET_M54451EVB=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=24000000"
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/M54451EVB_stmicro_defconfig

@@ -2,3 +2,4 @@ CONFIG_M68K=y
 CONFIG_TARGET_M54451EVB=y
 CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x47e00000,SYS_INPUT_CLKSRC=24000000"
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/M54455EVB_a66_defconfig

@@ -2,3 +2,4 @@ CONFIG_M68K=y
 CONFIG_TARGET_M54455EVB=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=66666666"
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/M54455EVB_defconfig

@@ -2,3 +2,4 @@ CONFIG_M68K=y
 CONFIG_TARGET_M54455EVB=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=33333333"
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/M54455EVB_i66_defconfig

@@ -2,3 +2,4 @@ CONFIG_M68K=y
 CONFIG_TARGET_M54455EVB=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=66666666"
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/M54455EVB_intel_defconfig

@@ -2,3 +2,4 @@ CONFIG_M68K=y
 CONFIG_TARGET_M54455EVB=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=33333333"
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/M54455EVB_stm33_defconfig

@@ -2,3 +2,4 @@ CONFIG_M68K=y
 CONFIG_TARGET_M54455EVB=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_STMICRO_BOOT,CF_SBF,SYS_TEXT_BASE=0x4FE00000,SYS_INPUT_CLKSRC=33333333"
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/MK808C_defconfig

@@ -3,5 +3,13 @@ CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-mk808c"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/MPC8536DS_36BIT_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_MPC8536DS=y
 CONFIG_SYS_EXTRA_OPTIONS="36BIT"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/MPC8536DS_SDCARD_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_MPC8536DS=y
 CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/MPC8536DS_SPIFLASH_defconfig

@@ -4,3 +4,4 @@ CONFIG_TARGET_MPC8536DS=y
 CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/MPC8536DS_defconfig

@@ -3,3 +3,4 @@ CONFIG_MPC85xx=y
 CONFIG_TARGET_MPC8536DS=y
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y

configs/MSI_Primo73_defconfig

@@ -9,5 +9,13 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_USB_KEYBOARD is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-primo73"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/MSI_Primo81_defconfig

@@ -3,13 +3,23 @@ CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN6I=y
 CONFIG_DRAM_CLK=360
 CONFIG_DRAM_ZQ=122
+CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
+CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_AXP_GPIO=y
 CONFIG_VIDEO_LCD_MODE="x:768,y:1024,depth:18,pclk_khz:66000,le:56,ri:60,up:30,lo:36,hs:64,vs:50,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_BL_EN="PA25"
 CONFIG_VIDEO_LCD_BL_PWM="PH13"
 CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y
+CONFIG_USB_MUSB_SUNXI=y
 # CONFIG_USB_KEYBOARD is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-primo81"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27
 CONFIG_VIDEO_LCD_SSD2828_RESET="PA26"
@@ -17,7 +27,4 @@ CONFIG_VIDEO_LCD_SPI_CS="PH9"
 CONFIG_VIDEO_LCD_SPI_SCLK="PH10"
 CONFIG_VIDEO_LCD_SPI_MOSI="PH11"
 CONFIG_VIDEO_LCD_SPI_MISO="PH12"
-CONFIG_AXP_GPIO=y
-CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
-CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB=y

configs/Marsboard_A10_defconfig

@@ -2,5 +2,13 @@ CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN4I=y
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-marsboard"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/Mele_A1000G_quad_defconfig

@@ -1,13 +1,3 @@
-# The Mele A1000G quad is yet another Allwinnner based Android top set box
-# from Mele.
-#
-# It uses the same case as the original Mele A1000 and the same PCB as the M9,
-# the  USM sata storage slot is connected via anusb to sata bridge connected to
-# the otg controller, this renders the micro USB B receptacle non functional.
-#
-# It features an A31 SoC, 2G RAM, 16G Nand, 100Mbit ethernet, HDMI out,
-# 3 USB A receptacles, 3.5 mm jack for analog audio out, optical spdif,
-# RTL R8188EU (USB) wifi and a full size sdcard slot
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN6I=y
@@ -15,10 +5,18 @@ CONFIG_DRAM_ZQ=120
 CONFIG_USB1_VBUS_PIN="PC27"
 CONFIG_USB2_VBUS_PIN=""
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mele-a1000g-quad"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
 CONFIG_AXP221_DCDC1_VOLT=3300
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_DLDO4_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3300
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/Mele_A1000_defconfig

@@ -3,5 +3,13 @@ CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN4I=y
 CONFIG_VIDEO_VGA=y
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/Mele_I7_defconfig

@@ -5,10 +5,18 @@ CONFIG_DRAM_ZQ=120
 CONFIG_USB1_VBUS_PIN="PC27"
 CONFIG_USB2_VBUS_PIN=""
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-i7"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
 CONFIG_AXP221_DCDC1_VOLT=3300
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_DLDO4_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3300
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/Mele_M3_defconfig

@@ -6,6 +6,14 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_VIDEO_VGA=y
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m3"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/Mele_M5_defconfig

@@ -5,6 +5,14 @@ CONFIG_DRAM_CLK=432
 CONFIG_DRAM_ZQ=122
 CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m5"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,USB_EHCI,STATUSLED=234"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/Mele_M9_defconfig

@@ -1,13 +1,3 @@
-# The Mele M9 is yet another Allwinnner based Android top set box from Mele.
-#
-# It uses the same PCB as the A1000G quad, but in a new case without a
-# USM sata storage slot, and the space on the PCB for the usb to sata
-# bridge connected to the otg controller is not populated, possible
-# making the micro usb otg connector functional (untested)
-#
-# It features an A31 SoC, 2G RAM, 16G Nand, 100Mbit ethernet, HDMI out,
-# 3 USB A receptacles, 3.5 mm jack for analog audio out, optical spdif,
-# micro USB B receptacle, RTL R8188EU (USB) and a full size sdcard slot
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN6I=y
@@ -15,10 +5,18 @@ CONFIG_DRAM_ZQ=120
 CONFIG_USB1_VBUS_PIN="PC27"
 CONFIG_USB2_VBUS_PIN=""
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
 CONFIG_AXP221_DCDC1_VOLT=3300
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_DLDO4_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3300
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/Merrii_A80_Optimus_defconfig

@@ -1,11 +1,18 @@
-CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus"
-CONFIG_VIDEO=n
-CONFIG_USB_KEYBOARD=n
-CONFIG_MMC0_CD_PIN="PH18"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN9I=y
-# these are unused atm but we must set them to something
 CONFIG_DRAM_CLK=360
 CONFIG_DRAM_ZQ=123
 CONFIG_SYS_CLK_FREQ=1008000000
+CONFIG_MMC0_CD_PIN="PH18"
+# CONFIG_VIDEO is not set
+# CONFIG_USB_KEYBOARD is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y