Merge tag 'arc-updates-for-2018.07-rc1' of git://git.denx.de/u-boot-arc

Here we do a couple of minor fixes like:
 - Move .ivt section to the very beginning of the image
   by default which allows us to use that image put right
   at reset vector (usually 0x0)

 - Improve relocation fix-up which became required once
   we moved .ivt and understood a problem with existing implementation
   where we relied on a particular placement of sections.
   Now we don't care about placement because we just explicitly
   check for .text and in case of ARCompact .ivt sections

 - Re-implemnt do_reset() such that it calls reset_cpu() which
   could implmented for a particular board

And hte most important part we introduce support for yet another
devboard from Synopsys - EMDK.

MAINTAINERS

@@ -60,6 +60,7 @@ S:	Maintained
 L:	uboot-snps-arc@synopsys.com
 T:	git git://git.denx.de/u-boot-arc.git
 F:	arch/arc/
+F:	board/synopsys/
 
 ARC HSDK CGU CLOCK
 M:	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>

arch/arc/Kconfig

@@ -150,6 +150,10 @@ config TARGET_AXS101
 config TARGET_AXS103
 	bool "Support Synopsys Designware SDP board AXS103"
 
+config TARGET_EMDK
+	bool "Synopsys EM Development kit"
+	select CPU_ARCEM6
+
 config TARGET_HSDK
 	bool "Support Synpsys HS DevelopmentKit board"
 
@@ -158,6 +162,7 @@ endchoice
 source "board/abilis/tb100/Kconfig"
 source "board/synopsys/Kconfig"
 source "board/synopsys/axs10x/Kconfig"
+source "board/synopsys/emdk/Kconfig"
 source "board/synopsys/hsdk/Kconfig"
 
 endmenu

arch/arc/cpu/u-boot.lds

@@ -5,28 +5,29 @@
 
 #include <config.h>
 
-OUTPUT_FORMAT("elf32-littlearc", "elf32-littlearc", "elf32-littlearc")
+OUTPUT_FORMAT("elf32-littlearc", "elf32-bigarc", "elf32-littlearc")
 OUTPUT_ARCH(arc)
 ENTRY(_start)
 SECTIONS
 {
 	. = CONFIG_SYS_TEXT_BASE;
 	__image_copy_start = .;
-	__text_start = .;
-	.text :	{
-		arch/arc/lib/start.o (.text*)
-		*(.text*)
-	}
-	__text_end = .;
-
 	. = ALIGN(1024);
 	__ivt_start = .;
 	.ivt :
 	{
-		*(.ivt)
+		KEEP(*(.ivt))
 	}
 	__ivt_end = .;
 
+	. = ALIGN(1024);
+	__text_start = .;
+	.text :	{
+		arch/arc/lib/start.o (.text*)
+		*(.text*)
+	}
+	__text_end = .;
+
 	. = ALIGN(4);
 	.rodata : {
 		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))

arch/arc/dts/Makefile

@@ -4,6 +4,7 @@ dtb-$(CONFIG_TARGET_AXS101) +=  axs101.dtb
 dtb-$(CONFIG_TARGET_AXS103) +=  axs103.dtb
 dtb-$(CONFIG_TARGET_NSIM) +=  nsim.dtb
 dtb-$(CONFIG_TARGET_TB100) +=  abilis_tb100.dtb
+dtb-$(CONFIG_TARGET_EMDK) +=  emdk.dtb
 dtb-$(CONFIG_TARGET_HSDK) +=  hsdk.dtb
 
 targets += $(dtb-y)

arch/arc/dts/emdk.dts

@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Synopsys, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include "skeleton.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		console = &uart0;
+	};
+
+	cpu_card {
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	uart0: serial0@f0004000 {
+		compatible = "snps,dw-apb-uart";
+		clock-frequency = <100000000>;
+		reg = <0xf0004000 0x1000>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+};

arch/arc/lib/cache.c

@@ -432,9 +432,16 @@ void read_decode_cache_bcr(void)
 	int dc_line_sz = 0, ic_line_sz = 0;
 	union bcr_di_cache ibcr, dbcr;
 
+	/*
+	 * We don't care much about I$ line length really as there're
+	 * no per-line ops on I$ instead we only do full invalidation of it
+	 * on occasion of relocation and right before jumping to the OS.
+	 * Still we check insane config with zero-encoded line length in
+	 * presense of version field in I$ BCR. Just in case.
+	 */
 	ibcr.word = read_aux_reg(ARC_BCR_IC_BUILD);
 	if (ibcr.fields.ver) {
-		gd->arch.l1_line_sz = ic_line_sz = 8 << ibcr.fields.line_len;
+		ic_line_sz = 8 << ibcr.fields.line_len;
 		if (!ic_line_sz)
 			panic("Instruction exists but line length is 0\n");
 	}
@@ -445,9 +452,6 @@ void read_decode_cache_bcr(void)
 		if (!dc_line_sz)
 			panic("Data cache exists but line length is 0\n");
 	}
-
-	if (ic_line_sz && dc_line_sz && (ic_line_sz != dc_line_sz))
-		panic("Instruction and data cache line lengths differ\n");
 }
 
 void cache_init(void)

arch/arc/lib/relocate.c

@@ -8,7 +8,9 @@
 #include <asm-generic/sections.h>
 
 extern ulong __image_copy_start;
+extern ulong __ivt_start;
 extern ulong __ivt_end;
+extern ulong __text_end;
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -48,7 +50,7 @@ int do_elf_reloc_fixups(void)
 	debug("Section .rela.dyn is located at %08x-%08x\n",
 	      (unsigned int)re_src, (unsigned int)re_end);
 
-	Elf32_Addr *offset_ptr_rom, *last_offset = NULL;
+	Elf32_Addr *offset_ptr_rom;
 	Elf32_Addr *offset_ptr_ram;
 
 	do {
@@ -57,15 +59,28 @@ int do_elf_reloc_fixups(void)
 
 		/* Check that the location of the relocation is in .text */
 		if (offset_ptr_rom >= (Elf32_Addr *)&__image_copy_start &&
-		    offset_ptr_rom > last_offset) {
-			unsigned int val;
+		    offset_ptr_rom < (Elf32_Addr *)&__image_copy_end) {
+			unsigned int val, do_swap = 0;
 			/* Switch to the in-RAM version */
 			offset_ptr_ram = (Elf32_Addr *)((ulong)offset_ptr_rom +
 							gd->reloc_off);
 
-			debug("Patching value @ %08x (relocated to %08x)\n",
+#ifdef __LITTLE_ENDIAN__
+			/* If location in ".text" section swap value */
+			if (((u32)offset_ptr_rom >= (u32)&__text_start &&
+			     (u32)offset_ptr_rom <= (u32)&__text_end)
+#if defined(__ARC700__) || defined(__ARC600__)
+			    || ((u32)offset_ptr_rom >= (u32)&__ivt_start &&
+				(u32)offset_ptr_rom <= (u32)&__ivt_end)
+#endif
+			   )
+				do_swap = 1;
+#endif
+
+			debug("Patching value @ %08x (relocated to %08x)%s\n",
 			      (unsigned int)offset_ptr_rom,
-			      (unsigned int)offset_ptr_ram);
+			      (unsigned int)offset_ptr_ram,
+			      do_swap ? ", middle-endian encoded" : "");
 
 			/*
 			 * Use "memcpy" because target location might be
@@ -75,28 +90,45 @@ int do_elf_reloc_fixups(void)
 			 */
 			memcpy(&val, offset_ptr_ram, sizeof(int));
 
-#ifdef __LITTLE_ENDIAN__
-			/* If location in ".text" section swap value */
-			if ((unsigned int)offset_ptr_rom <
-			    (unsigned int)&__ivt_end)
+			if (do_swap)
 				val = (val << 16) | (val >> 16);
-#endif
 
 			/* Check that the target points into executable */
-			if (val >= (unsigned int)&__image_copy_start && val <=
-			    (unsigned int)&__image_copy_end) {
-				val += gd->reloc_off;
-#ifdef __LITTLE_ENDIAN__
-				/* If location in ".text" section swap value */
-				if ((unsigned int)offset_ptr_rom <
-				    (unsigned int)&__ivt_end)
-					val = (val << 16) | (val >> 16);
-#endif
-				memcpy(offset_ptr_ram, &val, sizeof(int));
+			if (val < (unsigned int)&__image_copy_start ||
+			    val > (unsigned int)&__image_copy_end) {
+				/* TODO: Use panic() instead of debug()
+				 *
+				 * For some reason GCC might generate
+				 * fake relocation even for LD/SC of constant
+				 * inderectly. See an example below:
+				 * ----------------------->8--------------------
+				 * static int setup_mon_len(void)
+				 * {
+				 *         gd->mon_len = (ulong)&__bss_end - CONFIG_SYS_MONITOR_BASE;
+				 *         return 0;
+				 * }
+				 * ----------------------->8--------------------
+				 *
+				 * And that's what we get in the binary:
+				 * ----------------------->8--------------------
+				 * 10005cb4 <setup_mon_len>:
+				 * 10005cb4:       193c 3f80 0003 2f80     st      0x32f80,[r25,60]
+				 *                         10005cb8: R_ARC_RELATIVE        *ABS*-0x10000000
+				 * 10005cbc:       7fe0                    j_s.d   [blink]
+				 * 10005cbe:       700c                    mov_s   r0,0
+				 * ----------------------->8--------------------
+				 */
+				debug("Relocation target %08x points outside of image\n",
+				      val);
 			}
-		}
-		last_offset = offset_ptr_rom;
 
+			val += gd->reloc_off;
+
+			if (do_swap)
+				val = (val << 16) | (val >> 16);
+
+			memcpy(offset_ptr_ram, &val, sizeof(int));
+		}
 	} while (++re_src < re_end);
 
 	return 0;

arch/arc/lib/reset.c

@@ -6,13 +6,17 @@
 #include <command.h>
 #include <common.h>
 
+__weak void reset_cpu(ulong addr)
+{
+	/* Stop debug session here */
+	__builtin_arc_brk();
+}
+
 int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
 {
-	printf("Put your restart handler here\n");
+	printf("Resetting the board...\n");
+
+	reset_cpu(0);
 
-#ifdef DEBUG
-	/* Stop debug session here */
-	__asm__("brk");
-#endif
 	return 0;
 }

board/synopsys/emdk/Kconfig

@@ -0,0 +1,12 @@
+if TARGET_EMDK
+
+config SYS_BOARD
+	default "emdk"
+
+config SYS_VENDOR
+	default "synopsys"
+
+config SYS_CONFIG_NAME
+	default "emdk"
+
+endif

board/synopsys/emdk/MAINTAINERS

@@ -0,0 +1,5 @@
+EM DEVELOPMENT KIT BOARD
+M:	Alexey Brodkin <abrodkin@synopsys.com>
+S:	Maintained
+F:	board/synopsys/emdk/
+F:	configs/emdk_defconfig

board/synopsys/emdk/Makefile

@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2018 Synopsys, Inc. All rights reserved.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= emdk.o

board/synopsys/emdk/emdk.c

@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Synopsys, Inc. All rights reserved.
+ */
+
+#include <common.h>
+#include <dwmmc.h>
+#include <malloc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define ARC_PERIPHERAL_BASE	0xF0000000
+#define SDIO_BASE		(ARC_PERIPHERAL_BASE + 0x10000)
+
+int board_mmc_init(bd_t *bis)
+{
+	struct dwmci_host *host = NULL;
+
+	host = malloc(sizeof(struct dwmci_host));
+	if (!host) {
+		printf("dwmci_host malloc fail!\n");
+		return 1;
+	}
+
+	memset(host, 0, sizeof(struct dwmci_host));
+	host->name = "Synopsys Mobile storage";
+	host->ioaddr = (void *)SDIO_BASE;
+	host->buswidth = 4;
+	host->dev_index = 0;
+	host->bus_hz = 50000000;
+
+	add_dwmci(host, host->bus_hz / 2, 400000);
+
+	return 0;
+}
+
+#define CREG_BASE		0xF0001000
+#define CREG_BOOT_OFFSET	0
+#define CREG_BOOT_WP_OFFSET	8
+
+#define CGU_BASE		0xF0000000
+#define CGU_IP_SW_RESET		0x0FF0
+
+void reset_cpu(ulong addr)
+{
+	writel(1, (u32 *)(CGU_BASE + CGU_IP_SW_RESET));
+	while (1)
+		; /* loop forever till reset */
+}
+
+static int do_emdk_rom(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+	u32 creg_boot = readl((u32 *)(CREG_BASE + CREG_BOOT_OFFSET));
+
+	if (!strcmp(argv[1], "unlock"))
+		creg_boot &= ~BIT(CREG_BOOT_WP_OFFSET);
+	else if (!strcmp(argv[1], "lock"))
+		creg_boot |= BIT(CREG_BOOT_WP_OFFSET);
+	else
+		return CMD_RET_USAGE;
+
+	writel(creg_boot, (u32 *)(CREG_BASE + CREG_BOOT_OFFSET));
+
+	return CMD_RET_SUCCESS;
+}
+
+cmd_tbl_t cmd_emdk[] = {
+	U_BOOT_CMD_MKENT(rom, 2, 0, do_emdk_rom, "", ""),
+};
+
+static int do_emdk(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+	cmd_tbl_t *c;
+
+	c = find_cmd_tbl(argv[1], cmd_emdk, ARRAY_SIZE(cmd_emdk));
+
+	/* Strip off leading 'emdk' command */
+	argc--;
+	argv++;
+
+	if (c == NULL || argc > c->maxargs)
+		return CMD_RET_USAGE;
+
+	return c->cmd(cmdtp, flag, argc, argv);
+}
+
+U_BOOT_CMD(
+	emdk, CONFIG_SYS_MAXARGS, 0, do_emdk,
+	"Synopsys EMDK specific commands",
+	"rom unlock - Unlock non-volatile memory for writing\n"
+	"emdk rom lock - Lock non-volatile memory to prevent writing\n"
+);

configs/emdk_defconfig

@@ -0,0 +1,31 @@
+CONFIG_ARC=y
+CONFIG_ISA_ARCV2=y
+CONFIG_CPU_ARCEM6=y
+CONFIG_TARGET_EMDK=y
+CONFIG_SYS_TEXT_BASE=0x00000000
+CONFIG_SYS_CLK_FREQ=40000000
+CONFIG_DEFAULT_DEVICE_TREE="emdk"
+# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_VERSION_VARIABLE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="emdk# "
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y
+CONFIG_ENV_IS_IN_FAT=y
+CONFIG_ENV_FAT_INTERFACE="mmc"
+CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+# CONFIG_NET is not set
+CONFIG_DM=y
+CONFIG_MMC=y
+CONFIG_MMC_DW=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
+CONFIG_FS_FAT_MAX_CLUSTSIZE=4096
+CONFIG_USE_PRIVATE_LIBGCC=y
+CONFIG_PANIC_HANG=y

include/configs/emdk.h

@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Synopsys, Inc. All rights reserved.
+ */
+
+#ifndef _CONFIG_EMDK_H_
+#define _CONFIG_EMDK_H_
+
+#include <linux/sizes.h>
+
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_SDRAM_BASE		0x10000000
+#define CONFIG_SYS_SDRAM_SIZE		SZ_8M
+
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + SZ_1M)
+
+#define CONFIG_SYS_MALLOC_LEN		SZ_64K
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
+
+/* Required by DW MMC driver */
+#define CONFIG_BOUNCE_BUFFER
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_SIZE			SZ_4K
+#define CONFIG_BOOTFILE			"app.bin"
+#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"upgrade_image=u-boot.bin\0" \
+	"upgrade=emdk rom unlock && " \
+		"fatload mmc 0 ${loadaddr} ${upgrade_image} && " \
+		"cp.b ${loadaddr} 0 ${filesize} && " \
+		"dcache flush && " \
+		"emdk rom lock\0"
+
+#endif /* _CONFIG_EMDK_H_ */
+