sf: Add QUAD_IO_FAST read support

This patch adds support QUAD_IO_FAST read command.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>

drivers/mtd/spi/sf_internal.h

@@ -45,6 +45,7 @@
 #define CMD_READ_DUAL_OUTPUT_FAST	0x3b
 #define CMD_READ_DUAL_IO_FAST		0xbb
 #define CMD_READ_QUAD_OUTPUT_FAST	0x6b
+#define CMD_READ_QUAD_IO_FAST		0xeb
 #define CMD_READ_ID			0x9f
 
 /* Bank addr access commands */

drivers/mtd/spi/sf_probe.c

@@ -25,6 +25,7 @@ static u8 spi_read_cmds_array[] = {
 	CMD_READ_DUAL_OUTPUT_FAST,
 	CMD_READ_DUAL_IO_FAST,
 	CMD_READ_QUAD_OUTPUT_FAST,
+	CMD_READ_QUAD_IO_FAST,
 };
 
 static int spi_flash_set_qeb(struct spi_flash *flash, u8 idcode0)
@@ -131,6 +132,7 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi,
 
 	/* Set the quad enable bit - only for quad commands */
 	if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) ||
+	    (flash->read_cmd == CMD_READ_QUAD_IO_FAST) ||
 	    (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) {
 		if (spi_flash_set_qeb(flash, idcode[0])) {
 			debug("SF: Fail to set QEB for %02x\n", idcode[0]);

include/spi.h

@@ -39,8 +39,10 @@
 #define SPI_OPM_RX_DOUT		1 << 1
 #define SPI_OPM_RX_DIO		1 << 2
 #define SPI_OPM_RX_QOF		1 << 3
+#define SPI_OPM_RX_QIOF		1 << 4
 #define SPI_OPM_RX_EXTN		SPI_OPM_RX_AS | SPI_OPM_RX_DOUT | \
-				SPI_OPM_RX_DIO | SPI_OPM_RX_QOF
+				SPI_OPM_RX_DIO | SPI_OPM_RX_QOF | \
+				SPI_OPM_RX_QIOF
 
 /* Header byte that marks the start of the message */
 #define SPI_PREAMBLE_END_BYTE	0xec

include/spi_flash.h

@@ -28,9 +28,10 @@ enum spi_read_cmds {
 	DUAL_OUTPUT_FAST = 1 << 1,
 	DUAL_IO_FAST = 1 << 2,
 	QUAD_OUTPUT_FAST = 1 << 3,
+	QUAD_IO_FAST = 1 << 4,
 };
 #define RD_EXTN		ARRAY_SLOW | DUAL_OUTPUT_FAST | DUAL_IO_FAST
-#define RD_FULL		RD_EXTN | QUAD_OUTPUT_FAST
+#define RD_FULL		RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST
 
 /**
  * struct spi_flash_params - SPI/QSPI flash device params structure