ARM: DTS: Resync am3517-evm.dts with Linux 4.19

Some minor changes have been made to the AM3517-evm and the underlying
am3517.dtsi files.  This patch re-sync's the DTS and DTSI files with
Linux.

Signed-off-by: Adam Ford <aford173@gmail.com>

arch/arm/dts/am3517-evm.dts

@@ -127,6 +127,7 @@
 		status = "okay";
 		pinctrl-names = "default";
 		enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;	/* gpio176, lcd INI */
+		vcc-supply = <&vdd_io_reg>;
 
 		port {
 			lcd_in: endpoint {
@@ -154,6 +155,7 @@
 	bl: backlight {
 		compatible = "pwm-backlight";
 		pinctrl-names = "default";
+		power-supply = <&vdd_io_reg>;
 		pinctrl-0 = <&backlight_pins>;
 		pwms = <&pwm11 0 5000000 0>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
@@ -168,6 +170,13 @@
 		ti,timers = <&timer11>;
 		#pwm-cells = <3>;
 	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
+		#phy-cells = <0>;
+	};
 };
 
 &davinci_emac {
@@ -203,6 +212,7 @@
 		reg = <0x21>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		vcc-supply = <&vdd_io_reg>;
 	};
 };
 
@@ -220,15 +230,21 @@
 	cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */
 };
 
-&mmc2 {
+&mmc3 {
       status = "disabled";
 };
 
-&mmc3 {
-      status = "disabled";
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
 };
 
 &omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_rst_pins>;
 
 	leds_pins: pinmux_leds_pins {
 		pinctrl-single,pins = <
@@ -287,4 +303,32 @@
 			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)       /* dss_data15.dss_data15 */
 		>;
 	};
+
+	hsusb1_rst_pins: pinmux_hsusb1_rst_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs6.gpio_57 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
+
+	hsusb1_pins: pinmux_hsusb1_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)	/* etk_clk.hsusb1_stp */
+			OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)	/* etk_ctl.hsusb1_clk */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3)	/* etk_d8.hsusb1_dir */
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3)	/* etk_d9.hsusb1_nxt */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3)	/* etk_d0.hsusb1_data0 */
+			OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3)	/* etk_d1.hsusb1_data1 */
+			OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3)	/* etk_d2.hsusb1_data2 */
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3)	/* etk_d7.hsusb1_data3 */
+			OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3)	/* etk_d4.hsusb1_data4 */
+			OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3)	/* etk_d5.hsusb1_data5 */
+			OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3)	/* etk_d6.hsusb1_data6 */
+			OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3)	/* etk_d3.hsusb1_data7 */
+		>;
+	};
 };

arch/arm/dts/am3517-som.dtsi

@@ -14,6 +14,32 @@
 			cpu0-supply = <&vdd_core_reg>;
 		};
 	};
+
+	wl12xx_buffer: wl12xx_buf {
+		compatible = "regulator-fixed";
+		regulator-name = "wl1271_buf";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_buffer_pins>;
+		gpio = <&gpio5 1 GPIO_ACTIVE_LOW>; /* gpio 129 */
+		regulator-always-on;
+		vin-supply = <&vdd_1v8_reg>;
+	};
+
+	wl12xx_vmmc2: wl12xx_vmmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_wkup_pins>;
+		gpio = <&gpio1 3 GPIO_ACTIVE_HIGH >; /* gpio 3 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&wl12xx_buffer>;
+	};
 };
 
 &gpmc {
@@ -64,7 +90,6 @@
 		regulators {
 			vdd_core_reg: VDCDC1 {
 				regulator-name = "vdd_core";
-				compatible = "regulator-fixed";
 				regulator-always-on;
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -72,7 +97,6 @@
 
 			vdd_io_reg: VDCDC2 {
 				regulator-name = "vdd_io";
-				compatible = "regulator-fixed";
 				regulator-always-on;
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -80,7 +104,6 @@
 
 			vdd_1v8_reg: VDCDC3 {
 				regulator-name = "vdd_1v8";
-				compatible = "regulator-fixed";
 				regulator-always-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -88,7 +111,6 @@
 
 			vdd_usb18_reg: LDO1 {
 				regulator-name = "vdd_usb18";
-				compatible = "regulator-fixed";
 				regulator-always-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -96,7 +118,6 @@
 
 			vdd_usb33_reg: LDO2 {
 				regulator-name = "vdd_usb33";
-				compatible = "regulator-fixed";
 				regulator-always-on;
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -126,8 +147,63 @@
 	};
 };
 
+&mmc2 {
+	interrupts-extended = <&intc 86 /* &omap3_pmx_core 0x12c */>;
+
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&wl12xx_vmmc2>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */
+		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+
+	bluetooth {
+		compatible = "ti,wl1271-st";
+		enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio 56 */
+		max-speed = <3000000>;
+	};
+};
+
 &omap3_pmx_core {
 
+	wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)  /* mmc1_dat7.gpio_129 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_clk.mmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_cmd.mmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat0.mmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat1.mmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat2.mmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat3.mmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat4.mmc2_dir_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat5.mmc2_dir_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat6.mmc2_dir_cmd */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* mmc2_dat7.mmc2_clkin */
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE4)	/* hdq_sio.gpio_170 */
+		>;
+	};
+
 	rtc_pins: pinmux_rtc_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */
@@ -139,4 +215,23 @@
 			OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */
 		>;
 	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)		/* uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* uart2_rts */
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx */
+			OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT | MUX_MODE0)		/* gpio_56 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+
+	wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
+		>;
+	};
 };

arch/arm/dts/am3517.dtsi

@@ -91,6 +91,11 @@
 	};
 };
 
+/* Table Table 5-79 of the TRM shows 480ab000 is reserved */
+&usb_otg_hs {
+	status = "disabled";
+};
+
 &iva {
 	status = "disabled";
 };