ls1021aqds: add hwconfig setting to do pin mux

The Freescale LS1021AQDS share some pins, so Add the hwconfig option
that allows the user to choose which the function he wants.

The main pin mux IP is:
eSDHC, SAI, IIC2, RGMII, CAN, SAI.

Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

board/freescale/ls1021aqds/ls1021aqds.c

@@ -11,6 +11,7 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/fsl_serdes.h>
 #include <asm/pcie_layerscape.h>
+#include <hwconfig.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <fsl_ifc.h>
@@ -23,9 +24,22 @@
 #include "../../../drivers/qe/qe.h"
 #endif
 
+#define PIN_MUX_SEL_CAN		0x03
+#define PIN_MUX_SEL_IIC2	0xa0
+#define PIN_MUX_SEL_RGMII	0x00
+#define PIN_MUX_SEL_SAI		0x0c
+#define PIN_MUX_SEL_SDHC	0x00
+
+#define SET_SDHC_MUX_SEL(reg, value)	((reg & 0x0f) | value)
+#define SET_EC_MUX_SEL(reg, value)	((reg & 0xf0) | value)
 DECLARE_GLOBAL_DATA_PTR;
 
 enum {
+	MUX_TYPE_CAN,
+	MUX_TYPE_IIC2,
+	MUX_TYPE_RGMII,
+	MUX_TYPE_SAI,
+	MUX_TYPE_SDHC,
 	MUX_TYPE_SD_PCI4,
 	MUX_TYPE_SD_PC_SA_SG_SG,
 	MUX_TYPE_SD_PC_SA_PC_SG,
@@ -230,11 +244,27 @@ void board_init_f(ulong dummy)
 
 int config_board_mux(int ctrl_type)
 {
-	u8 reg12;
+	u8 reg12, reg14;
 
 	reg12 = QIXIS_READ(brdcfg[12]);
+	reg14 = QIXIS_READ(brdcfg[14]);
 
 	switch (ctrl_type) {
+	case MUX_TYPE_CAN:
+		reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_CAN);
+		break;
+	case MUX_TYPE_IIC2:
+		reg14 = SET_SDHC_MUX_SEL(reg14, PIN_MUX_SEL_IIC2);
+		break;
+	case MUX_TYPE_RGMII:
+		reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_RGMII);
+		break;
+	case MUX_TYPE_SAI:
+		reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_SAI);
+		break;
+	case MUX_TYPE_SDHC:
+		reg14 = SET_SDHC_MUX_SEL(reg14, PIN_MUX_SEL_SDHC);
+		break;
 	case MUX_TYPE_SD_PCI4:
 		reg12 = 0x38;
 		break;
@@ -253,6 +283,7 @@ int config_board_mux(int ctrl_type)
 	}
 
 	QIXIS_WRITE(brdcfg[12], reg12);
+	QIXIS_WRITE(brdcfg[14], reg14);
 
 	return 0;
 }
@@ -286,14 +317,50 @@ int config_serdes_mux(void)
 	return 0;
 }
 
-#if defined(CONFIG_MISC_INIT_R)
 int misc_init_r(void)
 {
+	int conflict_flag;
+
+	/* some signals can not enable simultaneous*/
+	conflict_flag = 0;
+	if (hwconfig("sdhc"))
+		conflict_flag++;
+	if (hwconfig("iic2"))
+		conflict_flag++;
+	if (conflict_flag > 1) {
+		printf("WARNING: pin conflict !\n");
+		return 0;
+	}
+
+	conflict_flag = 0;
+	if (hwconfig("rgmii"))
+		conflict_flag++;
+	if (hwconfig("can"))
+		conflict_flag++;
+	if (hwconfig("sai"))
+		conflict_flag++;
+	if (conflict_flag > 1) {
+		printf("WARNING: pin conflict !\n");
+		return 0;
+	}
+
+	if (hwconfig("can"))
+		config_board_mux(MUX_TYPE_CAN);
+	else if (hwconfig("rgmii"))
+		config_board_mux(MUX_TYPE_RGMII);
+	else if (hwconfig("sai"))
+		config_board_mux(MUX_TYPE_SAI);
+
+	if (hwconfig("iic2"))
+		config_board_mux(MUX_TYPE_IIC2);
+	else if (hwconfig("sdhc"))
+		config_board_mux(MUX_TYPE_SDHC);
+
 #ifdef CONFIG_FSL_CAAM
 	return sec_init();
 #endif
+	return 0;
 }
-#endif
 
 int board_init(void)
 {