dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig

Move this option to Kconfig and update all boards.
Signed-off-by: Simon Glass <sjg@chromium.org>

Kconfig

@@ -56,6 +56,25 @@ config CC_OPTIMIZE_FOR_SIZE
 
 	  This option is enabled by default for U-Boot.
 
+config SYS_MALLOC_F
+	bool "Enable malloc() pool before relocation"
+	default 0x400
+	help
+	  Before relocation memory is very limited on many platforms. Still,
+	  we can provide a small malloc() pool if needed. Driver model in
+	  particular needs this to operate, so that it can allocate the
+	  initial serial device and any others that are needed.
+
+config SYS_MALLOC_F_LEN
+	hex "Size of malloc() pool before relocation"
+	depends on SYS_MALLOC_F
+	default 0x400
+	help
+	  Before relocation memory is very limited on many platforms. Still,
+	  we can provide a small malloc() pool if needed. Driver model in
+	  particular needs this to operate, so that it can allocate the
+	  initial serial device and any others that are needed.
+
 menuconfig EXPERT
         bool "Configure standard U-Boot features (expert users)"
         help

arch/arm/cpu/armv7/exynos/Kconfig

@@ -80,6 +80,12 @@ config DM_SPI_FLASH
 config DM_GPIO
 	default y if !SPL_BUILD
 
+config SYS_MALLOC_F
+	default y if !SPL_BUILD
+
+config SYS_MALLOC_F_LEN
+	default 0x400 if !SPL_BUILD
+
 source "board/samsung/smdkv310/Kconfig"
 source "board/samsung/trats/Kconfig"
 source "board/samsung/universal_c210/Kconfig"

arch/arm/cpu/armv7/omap3/Kconfig

@@ -102,6 +102,12 @@ config DM_GPIO
 config DM_SERIAL
 	default y if DM && !SPL_BUILD
 
+config SYS_MALLOC_F
+	default y if DM && !SPL_BUILD
+
+config SYS_MALLOC_F_LEN
+	default 0x400 if DM && !SPL_BUILD
+
 config SYS_SOC
 	default "omap3"
 

arch/arm/cpu/armv7/tegra-common/Kconfig

@@ -17,6 +17,12 @@ config TEGRA124
 
 endchoice
 
+config SYS_MALLOC_F
+	default y
+
+config SYS_MALLOC_F_LEN
+	default 0x1800
+
 config USE_PRIVATE_LIBGCC
 	default y if SPL_BUILD
 

arch/arm/cpu/armv7/uniphier/Kconfig

@@ -48,6 +48,12 @@ config DCC_MICRO_SUPPORT_CARD
 
 endchoice
 
+config SYS_MALLOC_F
+	default y
+
+config SYS_MALLOC_F_LEN
+	default 0x2000
+
 config CMD_PINMON
 	bool "Enable boot mode pins monitor command"
 	default y

arch/x86/Kconfig

@@ -76,6 +76,12 @@ config DM_GPIO
 config DM_SERIAL
 	default y
 
+config SYS_MALLOC_F
+	default y
+
+config SYS_MALLOC_F_LEN
+	default 0x800
+
 config RAMBASE
 	hex
 	default 0x100000

board/ti/am335x/Kconfig

@@ -47,4 +47,10 @@ config DM_GPIO
 config DM_SERIAL
 	default y if DM && !SPL_BUILD
 
+config SYS_MALLOC_F
+	default y if DM && !SPL_BUILD
+
+config SYS_MALLOC_F_LEN
+	default 0x400 if DM && !SPL_BUILD
+
 endif

configs/Linksprite_pcDuino3_fdt_defconfig

@@ -13,3 +13,5 @@ CONFIG_OF_SEPARATE=y
 +S:CONFIG_DRAM_CLK=480
 +S:CONFIG_DRAM_ZQ=122
 +S:CONFIG_DRAM_EMR1=4
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/am335x_igep0033_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_AM335X_IGEP0033=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/cm_fx6_defconfig

@@ -5,3 +5,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL"
 CONFIG_DM=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_SERIAL=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/cm_t335_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_CM_T335=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/gwventana_defconfig

@@ -2,3 +2,5 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_GW_VENTANA=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/mx6dlsabreauto_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/mx6qsabreauto_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/mx6qsabresd_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6SABRESD=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/mx6sxsabresd_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6SXSABRESD=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/nokia_rx51_defconfig

@@ -4,3 +4,5 @@ CONFIG_TARGET_NOKIA_RX51=y
 CONFIG_DM=n
 CONFIG_DM_SERIAL=n
 CONFIG_DM_GPIO=n
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/pcm051_rev1_defconfig

@@ -2,3 +2,5 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="REV1"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_PCM051=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/pcm051_rev3_defconfig

@@ -2,3 +2,5 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="REV3"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_PCM051=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/pengwyn_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_PENGWYN=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/pepper_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_PEPPER=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/rpi_defconfig

@@ -1,2 +1,4 @@
 CONFIG_ARM=y
 CONFIG_TARGET_RPI=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/s5p_goni_defconfig

@@ -2,3 +2,5 @@ CONFIG_ARM=y
 CONFIG_ARCH_S5PC1XX=y
 CONFIG_TARGET_S5P_GONI=y
 CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-goni"
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/sandbox_defconfig

@@ -5,3 +5,5 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_DM=y
 CONFIG_DEFAULT_DEVICE_TREE="sandbox"
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/smdkc100_defconfig

@@ -2,3 +2,5 @@ CONFIG_ARM=y
 CONFIG_TARGET_SMDKC100=y
 CONFIG_ARCH_S5PC1XX=y
 CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100"
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/snapper9260_defconfig

@@ -4,3 +4,5 @@ CONFIG_TARGET_SNAPPER9260=y
 CONFIG_DM=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_SERIAL=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/snapper9g20_defconfig

@@ -4,3 +4,5 @@ CONFIG_TARGET_SNAPPER9260=y
 CONFIG_DM=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_SERIAL=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/stv0991_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SYS_EXTRA_OPTIONS="stv0991"
 CONFIG_ARM=y
 CONFIG_TARGET_STV0991=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000

include/configs/cm_fx6.h

@@ -21,10 +21,7 @@
 #define CONFIG_MACH_TYPE		4273
 
 #ifndef CONFIG_SPL_BUILD
-
 #define CONFIG_CMD_GPIO
-
-#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
 #endif
 
 /* Display information on boot */

include/configs/exynos-common.h

@@ -36,7 +36,6 @@
 #define CONFIG_ENV_OVERWRITE
 
 /* Size of malloc() pool before and after relocation */
-#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (80 << 20))
 
 /* select serial console configuration */

include/configs/gw_ventana.h

@@ -39,7 +39,6 @@
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
 
 /* Init Functions */
 #define CONFIG_BOARD_EARLY_INIT_F

include/configs/mx6sabre_common.h

@@ -27,7 +27,6 @@
 
 #define CONFIG_DM
 #define CONFIG_DM_THERMAL
-#define CONFIG_SYS_MALLOC_F_LEN	(1 << 10)
 #define CONFIG_IMX6_THERMAL
 
 #define CONFIG_SYS_GENERIC_BOARD

include/configs/mx6sxsabresd.h

@@ -229,7 +229,6 @@
 
 #define CONFIG_DM
 #define CONFIG_DM_THERMAL
-#define CONFIG_SYS_MALLOC_F_LEN	(1 << 10)
 #define CONFIG_IMX6_THERMAL
 
 #define CONFIG_CMD_FUSE

include/configs/nokia_rx51.h

@@ -72,7 +72,6 @@
 #define CONFIG_UBI_SIZE			(512 << 10)
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
 					(128 << 10))
-#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
 
 /*
  * Hardware drivers

include/configs/novena.h

@@ -116,7 +116,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x20000000
 
 #define CONFIG_SYS_MALLOC_LEN		(64 * 1024 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
 
 /* SPL */
 #define CONFIG_SPL_FAT_SUPPORT

include/configs/rpi.h

@@ -46,7 +46,6 @@
 					 CONFIG_SYS_SDRAM_SIZE - \
 					 GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_MALLOC_LEN		SZ_4M
-#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
 #define CONFIG_SYS_MEMTEST_START	0x00100000
 #define CONFIG_SYS_MEMTEST_END		0x00200000
 #define CONFIG_LOADADDR			0x00200000

include/configs/s5p_goni.h

@@ -40,7 +40,6 @@
 #define CONFIG_CMDLINE_EDITING
 
 /* Size of malloc() pool before and after relocation */
-#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (80 << 20))
 
 /*

include/configs/sandbox.h

@@ -60,7 +60,6 @@
 /*
  * Size of malloc() pool, before and after relocation
  */
-#define CONFIG_SYS_MALLOC_F_LEN	(1 << 10)
 #define CONFIG_MALLOC_F_ADDR		0x0010000
 #define CONFIG_SYS_MALLOC_LEN		(32 << 20)	/* 32MB  */
 

include/configs/smdkc100.h

@@ -48,9 +48,6 @@
  */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
 
-/* Small malloc pool before relocation */
-#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
-
 /*
  * select serial console configuration
  */

include/configs/snapper9260.h

@@ -21,7 +21,6 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000 /* External Crystal, in Hz */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
 #define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
 
 /* CPU */
 #define CONFIG_ARCH_CPU_INIT

include/configs/stv0991.h

@@ -28,7 +28,6 @@
 	(PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
 #define CONFIG_SYS_MAXARGS			16
 #define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 16 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN			0x2000
 
 #define CONFIG_DM
 /* serial port (PL011) configuration */

include/configs/sunxi-common.h

@@ -29,7 +29,6 @@
 
 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM)
 # define CONFIG_DW_SERIAL
-# define CONFIG_SYS_MALLOC_F_LEN	(1 << 10)
 #endif
 
 /*

include/configs/tegra-common.h

@@ -37,7 +37,6 @@
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		(4 << 20)	/* 4MB  */
-#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
 
 #define CONFIG_SYS_NONCACHED_MEMORY	(1 << 20)       /* 1 MiB */
 

include/configs/ti_am335x_common.h

@@ -21,7 +21,6 @@
 
 #ifndef CONFIG_SPL_BUILD
 # define CONFIG_OMAP_SERIAL
-# define CONFIG_SYS_MALLOC_F_LEN	(1 << 10)
 #endif
 
 #include <asm/arch/omap.h>

include/configs/ti_omap3_common.h

@@ -20,7 +20,6 @@
 
 #ifndef CONFIG_SPL_BUILD
 # define CONFIG_OMAP_SERIAL
-# define CONFIG_SYS_MALLOC_F_LEN	(1 << 10)
 #endif
 
 /* The chip has SDRC controller */

include/configs/uniphier.h

@@ -80,8 +80,6 @@
 #define CONFIG_SMC911X_BASE		CONFIG_SUPPORT_CARD_ETHER_BASE
 #define CONFIG_SMC911X_32_BIT
 
-#define CONFIG_SYS_MALLOC_F_LEN  0x2000
-
 /*-----------------------------------------------------------------------
  * MMU and Cache Setting
  *----------------------------------------------------------------------*/

include/configs/x86-common.h

@@ -187,7 +187,6 @@
 #define CONFIG_SYS_STACK_SIZE			(32 * 1024)
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MALLOC_LEN			0x200000
-#define CONFIG_SYS_MALLOC_F_LEN			(2 << 10)
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE